Date: Sun, 25 Apr 1999 09:52:12 -0700 (PDT) From: Randy Bush <randy@psg.com> To: FreeBSD Laptoppers <freebsd-mobile@freebsd.org> Subject: vaio 505tx 3.1-pao hangs after suspend Message-ID: <m10bS8a-0008G4C@rip.psg.com>
index | next in thread | raw e-mail
sony vaio 505tx
3.1-release + pao3
if i type 'zzz' it responds with a single beep and the screen goes blank as
expected.
i then hit a key to unsuspend. the screen lights and redisplays etc. but
no beep, no response to keyboard, ... dead machine except that the screen
has relit.
i then enabled all the suspend inclined goodies in the pao kernel config
(see appended kernel config and dmesg), and got the same result.
one time the result was
kernel trap 1 with interrupts disabled
Fatal trap 1: privileged intruction fault while in kernel mode
instruction pointer = 0x48:0x503f
stack pointer = 0x10:0xf0216b8c
frame pointer = 0x10:0xf0216b9c
code segment = base 0xf00f0000, limXXX(
proceddor eflags = resume, IOPL = 0
current trap number = 1
panic: privileged instruction fault
but usually it just freezes after relighting the screen.
note that this is all without any pccards inserted. same result with, but i
wanted to simplify things.
zzz and the equivalent fn keys worked fine before i went to pao.
randy
#
# Sample Laptop Configuration
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $Id: GENERIC,v 1.143.2.5 1999/03/29 17:59:38 ken Exp $
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident ROAM-PAO
maxusers 64
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
#options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
#options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
# If your laptop have not had Windoze95-Ready BIOS, please update it.
# Such old BIOS'es sometimes have critical bugs at 32-bit protected
# mode APM BIOS interface (which have not used by Windoze 3.1).
# PC-card suspend/resume support (experimental)
options APM_PCCARD_RESUME
options PCIC_RESUME_RESET
# Keep power for serial cards when the system suspends
# (If your machine hangs up when you try to suspend the system with
# FAX/Modem PCMCIA card, uncomment this option).
#options SIO_SUSP_KEEP_PWR
# Detach SCSI devices when the SCSI card is removed
#options SCSI_DETACH
# Detach ATAPI devices when the ATA card is removed
#options ATAPI_DETACH
# Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz
# band that US version uses. If you want to use Japanese version of
# WaveLAN, uncomment this line, or edit the corresponding config entry
# of /etc/pccard.conf.
#options "WAVELAN_PCMCIA_24"
# Suspend the system when the battery status is "Low"
#options "APM_BATT_LOW_SUSPEND"
# If you want to use NTP on laptop machines, uncomment the following
# option. Current APM implementation affects NTP client.
options "APM_NO_CLOCK_ADJUST"
# Some X-servers cannot survive suspend/resume on laptop.
# This option kicks her when the system is resumed from suspended mode.
options SYSCONS_VTY_RESUME
config kernel root on wd0
controller isa0
#controller eisa0
controller pci0
# Dont remove these two lines!
pseudo-device card 1
# You must use "flags 0x1" when you don't hear any negotiation noise(?)
# if you use modem card, or pccardd doesn't read cis tuple, tell you
# 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's
# pcic is your PC.
#device pcic0 at isa? port 0x3e0 flags 0x1 irq 11
device pcic0 at isa? port 0x3e0 irq 11
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device acd0 #IDE CD-ROM
#device wfd0 #IDE Floppy (e.g. LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller ncr0
#controller ahb0
#controller ahc0
#controller isp0
#controller dpt0
#controller adv0 at isa? port ? cam irq ?
#controller adw0
#controller bt0 at isa? port ? cam irq ?
#controller aha0 at isa? port ? cam irq ?
#controller scbus0
#device da0
#device sa0
#device pass0
#device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
options MAXCONS=4 # number of virtual consoles
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port IO_NPX irq 13
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? # Advanced Power Management
options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card?
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? disable port "IO_COM3" tty irq 5
#device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
#device plip0 at ppbus?
#device ppi0 at ppbus?
#controller vpo0 at ppbus?
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device ax0
#device de0
#device fxp0
#device mx0
#device pn0
#device rl0
#device tl0
#device tx0
#device vr0
#device vx0
#device wb0
#device xl0
#device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
device ep0 at isa? port 0x300 net irq 10
#device ex0 at isa? port? net irq?
#device fe0 at isa? port 0x300 net irq ?
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 net irq 10 drq 0
#device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device cs0 at isa? port 0x300 net irq ?
device wlp0 at isa? port 0x300 net irq 11
pseudo-device loop
pseudo-device ether
#pseudo-device sl 1
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
#pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
# This provides support for System V shared memory and message queues.
#
options SYSVSHM
options SYSVMSG
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
# aware of the legal and administrative consequences of enabling this
# option. The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
pseudo-device bpfilter 4 #Berkeley packet filter
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Sun Apr 25 09:03:37 PDT 1999
root@roam.psg.com:/usr/src/sys/compile/ROAM-PAO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (298.42-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 127889408 (124892K bytes)
Preloaded elf kernel "kernel" at 0xf0284000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <NeoMagic NM2160 laptop SVGA controller> rev 0x01 int a irq 9 on pci0.8.0
pcic0: <Ricoh RL5C475 PCI-CardBus Brige> rev 0x00 int a irq 255 on pci0.10.0
RL5C4XX PCI Config Reg: [CSC isa irq]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <4 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK6412MAT>
wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ep0 not found at 0x300
wlp0 not found at 0x300
pcic0 at 0x3e0-0x3e1 irq 11 on isa
PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s2a
Card inserted, slot 0
ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m10bS8a-0008G4C>