Date: Wed, 14 Jan 2004 14:48:40 -0500 From: Bruce Campbell <bruce@engmail.uwaterloo.ca> To: Michael Moss <mossmr@umdnj.edu> Cc: freebsd-hardware@freebsd.org Subject: Re: Zero-Slot Raid Controller on SuperMicro 6023-8R Message-ID: <1074109720.40059d185ade6@www.nexusmail.uwaterloo.ca> In-Reply-To: <8B5ACA67-46C8-11D8-8E41-000A9595B670@umdnj.edu> References: <8B5ACA67-46C8-11D8-8E41-000A9595B670@umdnj.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
A few weeks ago I tested out a Supermicro 6013L-8 with an Adaptec zero channel 2015S. Tests all ran fine, system installed straight off the 4.9 CD direct on to the RAID array (I used 2 disks, mirrored) I did nothing special during the install (apart from configuring the array in the adaptec bios) The 2010S and 2015S are both Ultra320, same chipset. The 2015S is smaller physically, and used for certain motherboards. The 2000S and 2005S are Ultra160. The supermicro 6023P-8R is Ultra320 and uses the 2010S, so I'd expect my successful test results would apply to it also. Quoting Michael Moss <mossmr@umdnj.edu>: > Hello Everyone, > Has anybody gotten the zero-slot raid controller to work on FreeBSD > <=4.9R? If so how?...Should I use a different raid card due to > performance or other concerns? I see support for the 2000S/2005S, but > not the 2010S in question...is this a problem? > > Thanks! > > Michael > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" > -- Bruce Campbell Engineering Computing CPH-2374B University of Waterloo (519)888-4567 ext 5889 ---------------------------------------- This mail sent through www.mywaterloo.ca
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1074109720.40059d185ade6>