Date: Sat, 31 May 2008 13:40:47 +0200 From: "Fuchs, Martin" <martin.fuchs@trendchiller.com> To: <pyunyh@gmail.com>, <jfvogel@gmail.com> Cc: freebsd-net@freebsd.org Subject: AW: Intel embedded NICs not working with FreeBSD 6.2, 6.3 and 7.0 Message-ID: <D55E1B02FEEDAA498F6967EB9820C6D80D7527@server.fuchsbau.lan> In-Reply-To: <20080528003526.GB63696@cdnetworks.co.kr> References: <D55E1B02FEEDAA498F6967EB9820C6D80D7522@server.fuchsbau.lan> <20080528003526.GB63696@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok, back again... sorry for letting you wait so long, but i had a lot to do... Since there's no possibility to copy via putty i'm copying by hand... hopefully there are not too many errors :-) ----- pciconf -lcv ... fxp0@pci0:1:4:0: class=0x020000 card=0x00708086 chip=0x12298086 rev=x010 hdr=0x00 class = network subclass = ethernet cap01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0 fxp1@pci0:1:5:0: class=0x020000 card=0x00708086 chip=0x12298086 rev=x010 hdr=0x00 class = network subclass = ethernet cap01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0 fxp2@pci0:1:8:0: class=0x020000 card=0x30118086 chip=0x103a8086 rev=x010 hdr=0x00 class = network subclass = ethernet cap01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0 ----- dmesg shows for example: fxp0: link state changed to down fxp1: link state changed to down fxp2: link state changed to down fxp1: link state changed to up <- when I attach a network cable to a switch ----- devinfo does not work... does not find the command (it's the freebsd under pfSense) ----- vmstat -i interrupt total rate irq0: clk 1348688 999 irq5: ehci0 9043 6 irq8: rtc 172621 127 irq10: fxp1 91 0 irq12: fxp0 86 0 irq14: uhci0 ata0 792 0 irq15: ata1 2738 2 Total 1534059 1137 ----- Hope you can use this information ? Regards, Martin -----Ursprüngliche Nachricht----- Von: Pyun YongHyeon [mailto:pyunyh@gmail.com] Gesendet: Mittwoch, 28. Mai 2008 02:35 An: Fuchs, Martin Cc: freebsd-net@freebsd.org Betreff: Re: Intel embedded NICs not working with FreeBSD 6.2, 6.3 and 7.0 On Tue, May 27, 2008 at 08:22:56PM +0200, Fuchs, Martin wrote: > Hi ! > > > > I am in contact with Chris Buechler because of pfSense and we he told me > to contact Jack Vogel because of some Intel NIC driver problem. > > > > FreeBSD detects them as fxp cards which is correct, but they do not work > at all, i tried in ACPI and non-ACPI mode and with enabled ROM and > disabled ROM and everything, but I cannot get them working... > > I always get "fxp0 timeout" or fxpX fort he corresponding card... I read > it might have something to do with dynamic powersaving mode or else but > have no clue how to deactivate, there's no option in the ROM for this. > > > > It's an appliance board (NexCom EBC575) with Intel 845GV / Intel 82801DB > (ICH4)-chipset and 2 x Intel 82551QM (PRO/100 Network Connection), 1 x > ICH4 integrated LAN Int on board. > > > > Is there anything I can tot o make it work for now or is it a known > problem or else ? > Since there are too many variants of fxp hardwares it would be even better to post the output of the following. o pciconf -lcv o dmesg output related with fxp(4) o devinfo -rv | grep oui o vmstat -i > > > Regards, > > > > looking forward to hear from you, > > > > Martin -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D55E1B02FEEDAA498F6967EB9820C6D80D7527>