Date: Wed, 15 Oct 2003 16:46:51 +0200 From: a@jenisch.at To: freebsd-current@freebsd.org Subject: PCcards not working (5.1) Message-ID: <20031015144651.GA22097@athena.oekb.co.at>
next in thread | raw e-mail | index | archive | help
Hi, I'm running into a problem wrt PCcards under 5.1. First, here's what I've got: Compaq Evo N610c, 1GB RAM, 40GB HD, latest BIOS SW: FreeBSD 5.1 The problem: The PCCard-slots are recognized upon boot but when I insert a card into any of the two slots I get an error message, telling me that there's no pccard slot present. (excert from /var/log/messages) Oct 15 09:19:16 beastie pccardd[507]: fatal error: no PC-CARD slots Oct 15 09:19:23 beastie kernel: pccard0: can't alloc memory to read attributes Oct 15 09:19:23 beastie kernel: pccard0: CARD ERROR! Oct 15 09:19:23 beastie kernel: cbb0: PC Card card activation failed When I try to start pccardd by hand, even using "pccardd -d" it dies immediately with the same error message. Please note that this happens independent of the card(s) I use: I've tried with a Cisco Aironet 350 WLAN-card, an Elsa WLAN-card (old prism chipset) as well as a Xircom 10/100 Ethernet-Card - these are all cards that should be well known to FreeBSD. I've already tried upgrading both kernel and userland to the latest version (cvsup and the usual build/install procedure) - to no extent; the error remains the same. For your reference I'm including the complete boot-log below (/var/log/messages). Any ideas what could be wrong here? TIA for your help, -ewald ------------------------------ < Cut here > ------------------------------ Oct 15 09:16:07 beastie syslogd: kernel boot file is /boot/kernel/kernel Oct 15 09:16:07 beastie kernel: Copyright (c) 1992-2003 The FreeBSD Project. Oct 15 09:16:07 beastie kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Oct 15 09:16:07 beastie kernel: The Regents of the University of California. All rights reserved. Oct 15 09:16:07 beastie kernel: FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 Oct 15 09:16:07 beastie kernel: root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Oct 15 09:16:07 beastie kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000. Oct 15 09:16:07 beastie kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4. Oct 15 09:16:07 beastie kernel: Timecounter "i8254" frequency 1193182 Hz Oct 15 09:16:07 beastie kernel: Timecounter "TSC" frequency 1993538372 Hz Oct 15 09:16:07 beastie kernel: CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1993.54-MHz 686-class CPU) Oct 15 09:16:07 beastie kernel: Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Oct 15 09:16:07 beastie kernel: Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Oct 15 09:16:07 beastie kernel: real memory = 1073545216 (1023 MB) Oct 15 09:16:07 beastie kernel: avail memory = 1035640832 (987 MB) Oct 15 09:16:07 beastie kernel: Pentium Pro MTRR support enabled Oct 15 09:16:07 beastie kernel: npx0: <math processor> on motherboard Oct 15 09:16:07 beastie kernel: npx0: INT 16 interface Oct 15 09:16:07 beastie kernel: acpi0: <COMPAQ CPQ00B7 > on motherboard Oct 15 09:16:07 beastie kernel: pcibios: BIOS version 2.10 Oct 15 09:16:07 beastie kernel: ACPI-0351: *** Error: Could not install PciConfig handler for C045, AE_ALREADY_EXISTS Oct 15 09:16:07 beastie last message repeated 3 times Oct 15 09:16:07 beastie kernel: acpi0: power button is handled as a fixed feature programming model. Oct 15 09:16:07 beastie kernel: Timecounter "ACPI-fast" frequency 3579545 Hz Oct 15 09:16:07 beastie kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 Oct 15 09:16:07 beastie kernel: acpi_cpu0: <CPU> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_tz0: <thermal zone> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_tz1: <thermal zone> on acpi0 Oct 15 09:16:07 beastie kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Oct 15 09:16:07 beastie kernel: pci0: <ACPI PCI bus> on pcib0 Oct 15 09:16:07 beastie kernel: agp0: <Intel 82845 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0 Oct 15 09:16:07 beastie kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 Oct 15 09:16:07 beastie kernel: pci1: <ACPI PCI bus> on pcib1 Oct 15 09:16:07 beastie kernel: pci1: <display, VGA> at device 0.0 (no driver attached) Oct 15 09:16:07 beastie kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 Oct 15 09:16:07 beastie kernel: pci2: <ACPI PCI bus> on pcib2 Oct 15 09:16:07 beastie kernel: pci2: <simple comms> at device 4.0 (no driver attached) Oct 15 09:16:07 beastie kernel: cbb0: <TI1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11 at device 6.0 on pci2 Oct 15 09:16:07 beastie kernel: cardbus0: <CardBus bus> on cbb0 Oct 15 09:16:07 beastie kernel: pccard0: <16-bit PCCard bus> on cbb0 Oct 15 09:16:07 beastie kernel: cbb1: <TI1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff at device 6.1 on pci2 Oct 15 09:16:07 beastie kernel: cardbus1: <CardBus bus> on cbb1 Oct 15 09:16:07 beastie kernel: pccard1: <16-bit PCCard bus> on cbb1 Oct 15 09:16:07 beastie kernel: pcib2: slot 6 INTA is routed to irq 11 Oct 15 09:16:07 beastie kernel: fxp0: <Intel 82801CAM (ICH3) Pro/100 VM Ethernet> port 0x2400-0x243f mem 0x40100000-0x40100fff irq 10 at device 8.0 on pci2 Oct 15 09:16:07 beastie kernel: fxp0: Ethernet address 00:02:a5:c1:24:ef Oct 15 09:16:07 beastie kernel: miibus0: <MII bus> on fxp0 Oct 15 09:16:07 beastie kernel: inphy0: <i82562ET 10/100 media interface> on miibus0 Oct 15 09:16:07 beastie kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Oct 15 09:16:07 beastie kernel: ohci0: <NEC uPD 9210 USB controller> mem 0x40180000-0x40180fff irq 10 at device 14.0 on pci2 Oct 15 09:16:07 beastie kernel: usb0: OHCI version 1.0, legacy support Oct 15 09:16:07 beastie kernel: usb0: <NEC uPD 9210 USB controller> on ohci0 Oct 15 09:16:07 beastie kernel: usb0: USB revision 1.0 Oct 15 09:16:07 beastie kernel: uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Oct 15 09:16:07 beastie kernel: uhub0: 3 ports with 3 removable, self powered Oct 15 09:16:07 beastie kernel: ohci1: <NEC uPD 9210 USB controller> mem 0x40200000-0x40200fff irq 10 at device 14.1 on pci2 Oct 15 09:16:07 beastie kernel: usb1: OHCI version 1.0, legacy support Oct 15 09:16:07 beastie kernel: usb1: <NEC uPD 9210 USB controller> on ohci1 Oct 15 09:16:07 beastie kernel: usb1: USB revision 1.0 Oct 15 09:16:07 beastie kernel: uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Oct 15 09:16:07 beastie kernel: uhub1: 2 ports with 2 removable, self powered Oct 15 09:16:07 beastie kernel: pci2: <serial bus, USB> at device 14.2 (no driver attached) Oct 15 09:16:07 beastie kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 Oct 15 09:16:07 beastie kernel: isa0: <ISA bus> on isab0 Oct 15 09:16:07 beastie kernel: atapci0: <Intel ICH3 UDMA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0 Oct 15 09:16:07 beastie kernel: ata0: at 0x1f0 irq 14 on atapci0 Oct 15 09:16:07 beastie kernel: ata1: at 0x170 irq 15 on atapci0 Oct 15 09:16:07 beastie kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached) Oct 15 09:16:07 beastie kernel: acpi_cmbat0: <Control method Battery> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_cmbat1: <Control method Battery> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_acad0: <AC adapter> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_button0: <Sleep Button> on acpi0 Oct 15 09:16:07 beastie kernel: acpi_lid0: <Control Method Lid Switch> on acpi0 Oct 15 09:16:07 beastie kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Oct 15 09:16:07 beastie kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Oct 15 09:16:07 beastie kernel: kbd0 at atkbd0 Oct 15 09:16:07 beastie kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Oct 15 09:16:07 beastie kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 15 09:16:07 beastie kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0 Oct 15 09:16:07 beastie kernel: sio0: type 16550A Oct 15 09:16:07 beastie kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 Oct 15 09:16:07 beastie kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 15 09:16:07 beastie kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Oct 15 09:16:07 beastie kernel: sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 1 on acpi0 Oct 15 09:16:07 beastie kernel: sio1: type 16550A Oct 15 09:16:07 beastie kernel: ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 Oct 15 09:16:07 beastie kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Oct 15 09:16:07 beastie kernel: ppbus0: <Parallel port bus> on ppc0 Oct 15 09:16:07 beastie kernel: plip0: <PLIP network interface> on ppbus0 Oct 15 09:16:07 beastie kernel: lpt0: <Printer> on ppbus0 Oct 15 09:16:07 beastie kernel: lpt0: Interrupt-driven port Oct 15 09:16:07 beastie kernel: ppi0: <Parallel I/O> on ppbus0 Oct 15 09:16:07 beastie kernel: orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 Oct 15 09:16:07 beastie kernel: pmtimer0 on isa0 Oct 15 09:16:07 beastie kernel: sc0: <System console> at flags 0x100 on isa0 Oct 15 09:16:07 beastie kernel: sc0: VGA <16 virtual consoles, flags=0x300> Oct 15 09:16:07 beastie kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Oct 15 09:16:07 beastie kernel: Timecounters tick every 10.000 msec Oct 15 09:16:07 beastie kernel: acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% Oct 15 09:16:07 beastie kernel: ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100 Oct 15 09:16:07 beastie kernel: acd0: CD-RW <HL-DT-STCD-RW/DVD DRIVE GCC-4240N> at ata1-master PIO4 Oct 15 09:16:07 beastie kernel: Mounting root from ufs:/dev/ad0s4a Oct 15 09:16:27 beastie login: ROOT LOGIN (root) ON ttyv0 Here come the errors: Oct 15 09:19:16 beastie pccardd[507]: fatal error: no PC-CARD slots Oct 15 09:19:23 beastie kernel: pccard0: can't alloc memory to read attributes Oct 15 09:19:23 beastie kernel: pccard0: CARD ERROR! Oct 15 09:19:23 beastie kernel: cbb0: PC Card card activation failed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031015144651.GA22097>