Date: Tue, 01 Jun 2010 22:15:11 +0200 From: Pav Lucistnik <pav@FreeBSD.org> To: perl@FreeBSD.org Subject: [Fwd: p5-PCSC-Card-1.4.8 failed on amd64 6] Message-ID: <1275423311.40365.4.camel@hood.oook.cz>
next in thread | raw e-mail | index | archive | help
--=-u5bqPUs0tZ54G8g8Lkya Content-Type: text/plain; charset="ISO-8859-2" Content-Transfer-Encoding: quoted-printable -------- P=F8eposlan=E1 zpr=E1va -------- > Od: User Ports-amd64 <ports-amd64@FreeBSD.org> > Komu: cvs@oook.cz, linimon@FreeBSD.org, itetcu@FreeBSD.org > P=F8edm=ECt: p5-PCSC-Card-1.4.8 failed on amd64 6 > Datum: Tue, 1 Jun 2010 11:43:42 GMT >=20 > You can also find this build log at >=20 > http://pointyhat.FreeBSD.org/errorlogs/amd64-errorlogs/a.6.201005311408= 53/p5-PCSC-Card-1.4.8.log >=20 > building p5-PCSC-Card-1.4.8 on hobson5.isc.freebsd.org > in directory /usr2/pkgbuild/6/20100531140853/chroot/13320 > building for: 6.4-RELEASE-p9 amd64 > maintained by: perl@FreeBSD.org > port directory: /usr/ports/devel/p5-PCSC-Card > Makefile ident: $FreeBSD: ports/devel/p5-PCSC-Card/Makefile,v 1.14 2009/1= 0/09 08:19:16 jadawin Exp $ > build started at Tue Jun 1 11:45:07 UTC 2010 > FETCH_DEPENDS=3D > PATCH_DEPENDS=3Dperl-5.10.1_1.tbz > EXTRACT_DEPENDS=3Dperl-5.10.1_1.tbz > BUILD_DEPENDS=3Dlibusb-0.1.12_4.tbz pcsc-lite-1.6.0,2.tbz perl-5.10.1_1.t= bz pkg-config-0.23_1.tbz > RUN_DEPENDS=3Dlibusb-0.1.12_4.tbz pcsc-lite-1.6.0,2.tbz perl-5.10.1_1.tbz= pkg-config-0.23_1.tbz > prefixes: LOCALBASE=3Dusr/local > add_pkg > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 1: mak= e checksum>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D> License check disabled, port has not defined LICENSE > =3D> pcsc-perl-1.4.8.tar.gz doesn't seem to exist in /tmp/distfiles/. > =3D> Attempting to fetch from ftp://freebsd.isc.org/pub/FreeBSD/ports/dis= tfiles/. > pcsc-perl-1.4.8.tar.gz 42 kB 796 kBps > =3D> MD5 Checksum OK for pcsc-perl-1.4.8.tar.gz. > =3D> SHA256 Checksum OK for pcsc-perl-1.4.8.tar.gz. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 2: mak= e extract>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.10.1_1.tbz > adding dependencies > pkg_add perl-5.10.1_1.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > =3D=3D=3D> License check disabled, port has not defined LICENSE > =3D=3D=3D> Extracting for p5-PCSC-Card-1.4.8 > =3D> MD5 Checksum OK for pcsc-perl-1.4.8.tar.gz. > =3D> SHA256 Checksum OK for pcsc-perl-1.4.8.tar.gz. > =3D=3D=3D> p5-PCSC-Card-1.4.8 depends on file: /usr/local/bin/perl5.10.= 1 - found > Deleting perl-5.10.1_1 > Removing stale symlinks from /usr/bin... > Removing /usr/bin/perl > Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 3: mak= e patch>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.10.1_1.tbz > adding dependencies > pkg_add perl-5.10.1_1.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > =3D=3D=3D> Patching for p5-PCSC-Card-1.4.8 > =3D=3D=3D> p5-PCSC-Card-1.4.8 depends on file: /usr/local/bin/perl5.10.= 1 - found > /usr/bin/sed -i.bak -e "s,-I/usr/local/pcsc/include,/usr/local/include/PC= SC," /work/a/ports/devel/p5-PCSC-Card/work/pcsc-perl-1.4.8/Makefile.PL > Deleting perl-5.10.1_1 > Removing stale symlinks from /usr/bin... > Removing /usr/bin/perl > Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 4: mak= e build>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg libusb-0.1.12_4.tbz pcsc-lite-1.6.0,2.tbz perl-5.10.1_1.tbz pkg-c= onfig-0.23_1.tbz > adding dependencies > pkg_add libusb-0.1.12_4.tbz > pkg_add pcsc-lite-1.6.0,2.tbz >=20 > ------------------------------------------------------------------------ >=20 > PC/SC-Lite has been installed. > You can fetch drivers from http://www.linuxnet.com/sourcedrivers.html > or install one of the following ports: > devel/libccid > security/ifd-gempc410 > security/ifd-slb_rf60 >=20 > After installing the driver, please update the pcscd configuration file > /usr/local/etc/reader.conf by using the default > /usr/local/etc/reader.conf.sample >=20 > For USB cardreaders add the following lines to /etc/devd.conf to enable > hotplugging. >=20 > attach 100 { > device-name "ugen[0-9]+"; > action "/usr/local/sbin/pcscd -H"; > }; >=20 > detach 100 { > device-name "ugen[0-9]+"; > action "/usr/local/sbin/pcscd -H"; > }; > ------------------------------------------------------------------------ >=20 > pkg_add perl-5.10.1_1.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > pkg_add pkg-config-0.23_1.tbz > skipping pkg-config-0.23_1, already added > =3D=3D=3D> p5-PCSC-Card-1.4.8 depends on file: /usr/local/bin/perl5.10.= 1 - found > =3D=3D=3D> p5-PCSC-Card-1.4.8 depends on shared library: pcsclite.1 - f= ound > =3D=3D=3D> Configuring for p5-PCSC-Card-1.4.8 > osname: freebsd > LDDFLAGS:=20 > INC: `pkg-config --cflags libpcsclite` > Checking if your kit is complete... > Looks good > Writing Makefile for Chipcard::PCSC::Card > Writing Makefile for Chipcard::PCSC > =3D=3D=3D> Building for p5-PCSC-Card-1.4.8 > cp PCSC.pod blib/lib/Chipcard/PCSC.pod > cp PCSC.pm blib/lib/Chipcard/PCSC.pm > /usr/local/bin/perl5.10.1 /usr/local/lib/perl5/5.10.1/ExtUtils/xsubpp -t= ypemap /usr/local/lib/perl5/5.10.1/ExtUtils/typemap -typemap typemap PCSC.= xs > PCSC.xsc && mv PCSC.xsc PCSC.c > cc -c `pkg-config --cflags libpcsclite` -O2 -fno-strict-aliasing -pipe = -O2 -fno-strict-aliasing -pipe -DVERSION=3D\"0.05\" -DXS_VERSION=3D\"0.= 05\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.10.1/mach/CORE" -O2 -Wall PCSC.= c > PCSC.xs: In function `_StringifyError': > PCSC.xs:283: error: `SCARD_W_INSERTED_CARD' undeclared (first use in this= function) > PCSC.xs:283: error: (Each undeclared identifier is reported only once > PCSC.xs:283: error: for each function it appears in.) > PCSC.c: In function `XS_Chipcard__PCSC__EstablishContext': > PCSC.c:487: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__ListReaders': > PCSC.c:555: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__Connect': > PCSC.c:656: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__Reconnect': > PCSC.c:692: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__Status': > PCSC.c:772: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__Transmit': > PCSC.c:903: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__Control': > PCSC.c:1023: warning: unused variable `RETVAL' > PCSC.c: In function `XS_Chipcard__PCSC__GetStatusChange': > PCSC.c:1181: warning: unused variable `RETVAL' > *** Error code 1 >=20 > Stop in /work/a/ports/devel/p5-PCSC-Card/work/pcsc-perl-1.4.8. > *** Error code 1 >=20 > Stop in /a/ports/devel/p5-PCSC-Card. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > build of /usr/ports/devel/p5-PCSC-Card ended at Tue Jun 1 11:46:52 UTC 2= 010 >=20 --=20 Pav Lucistnik <pav@oook.cz> <pav@FreeBSD.org> What to tell to a KDE developer: "Your default theme reminds me of candy and makes me want to lick my monitor." --=-u5bqPUs0tZ54G8g8Lkya Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?= =?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?= =?ISO-8859-1?Q?_zpr=E1vy?= -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (FreeBSD) iEYEABECAAYFAkwFak4ACgkQntdYP8FOsoJUrgCeL79TjpqAXhgGCN5l4Jk6VQ/9 /HUAnAjRvBg2Oxr2CbOPP+TS0m/SJYqD =gftL -----END PGP SIGNATURE----- --=-u5bqPUs0tZ54G8g8Lkya--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1275423311.40365.4.camel>