Date: Tue, 21 Aug 2007 02:00:13 GMT From: Rostyslav <rostyslav@optonline.net> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/115666: Microphon Message-ID: <200708210200.l7L20DN1000920@www.freebsd.org> Resent-Message-ID: <200708210210.l7L2A1Pu047424@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 115666
>Category: misc
>Synopsis: Microphon
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Aug 21 02:10:01 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Rostyslav
>Release: FreeBSD 6.2-RELEASE
>Organization:
home
>Environment:
FreeBSD home.openhost 6.2-RELEASE FreeBSD 6.2-RELEASE #1: Sat Aug 18 15:21:51 EDT 2007 root@home.openhost:/usr/obj/usr/src/sys/ROSSKERNEL i386
>Description:
My microphon does not work in Freebsd at all(skype too). I just can not get it work.
-----------------------------------------------------------------------------
#dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Sat Aug 18 15:21:51 EDT 2007
root@home.openhost:/usr/obj/usr/src/sys/ROSSKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf49 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 2
real memory = 535064576 (510 MB)
avail memory = 501182464 (477 MB)
ACPI APIC Table: <INTEL D11020M >
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL D11020M> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff00000-0xffffffff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7600 GS> port 0x2000-0x207f mem 0x31000000-0x31ffffff,0x20000000-0x2fffffff,0x30000000-0x30ffffff irq 18 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
atapci0: <ATI IXP400 SATA150 controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3030-0x303f mem 0x32107600-0x321077ff irq 23 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <ATI IXP400 SATA150 controller> port 0x3058-0x305f,0x307c-0x307f,0x3050-0x3057,0x3078-0x307b,0x3020-0x302f mem 0x32107400-0x321075ff irq 22 at device 18.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ohci0: <ATI SB400 USB Controller> irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: timed out waiting for BIOS
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3000-0x300f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
pcm0: <ATI SB450 High Definition Audio Controller> mem 0x32100000-0x32103fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x32010000-0x320100ff irq 21 at device 2.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:76:6d:0a:5e
ath0: <Atheros 5212> mem 0x32000000-0x3200ffff irq 17 at device 4.0 on pci2
ath0: Ethernet address: 00:11:95:cf:28:ca
ath0: mac 7.9 phy 4.5 radio 5.6
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 4 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x15ca USB Optical Mouse, rev 2.00/5.12, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 3200143760 Hz quality 800
Timecounters tick every 1.000 msec
ath0f0: Ethernet address: 00:11:95:cf:28:ca
ath0f1: Ethernet address: 00:11:95:cf:28:ca
ath0f2: Ethernet address: 00:11:95:cf:28:ca
ath0f3: Ethernet address: 00:11:95:cf:28:ca
rl0f0: Ethernet address: 00:16:76:6d:0a:5e
rl0f1: Ethernet address: 00:16:76:6d:0a:5e
rl0f2: Ethernet address: 00:16:76:6d:0a:5e
rl0f3: Ethernet address: 00:16:76:6d:0a:5e
acd0: CDRW <SONY CD-RW CRX300E/KYS1> at ata0-master UDMA33
ad3: 286168MB <Seagate ST3300620A 3.AAC> at ata1-slave UDMA100
ad8: 305245MB <Seagate ST3320620AS 3.AAE> at ata4-master SATA150
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20070710_0047>
Trying to mount root from ufs:/dev/ad8s1a
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200708210200.l7L20DN1000920>