Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Nov 2004 23:26:27 -0400
From:      fredthetree <fredthetree@gmail.com>
To:        freebsd-stable@freebsd.org
Subject:   ath0: device timeout
Message-ID:  <cb6387b504111219264dffc565@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
Using 5.3-RELEASE-i386, I am not able to use my usb mouse while using
the internet through my Atheros 5212 wireless pci card.

Here's what I do:
$ startx
$ ping google.com
[move mouse]

Here's what happens:

ath0: device timeout
[X & mouse lock up]


--------------------------
$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov  5 04:19:18 UTC 2004
    root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (701.59-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 536805376 (511 MB)
avail memory = 515633152 (491 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f
irq 10 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr
2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
pci0: <network, ethernet> at device 13.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 810C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 701593791 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 9536MB <Maxtor 5T010H1/TAH71DP0> [19376/16/63] at ata0-master UDMA33
acd0: CDRW <HL-DT-ST GCE-8525B/1.03> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ath0: <Atheros 5212> mem 0xe8000000-0xe800ffff irq 10 at device 13.0 on pci0
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: Ethernet address: 00:0f:3d:50:13:5c
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout

--------------------------
$  ifconfig
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
	inet6 fe80::20f:3dff:fe50:135c%ath0 prefixlen 64 scopeid 0x3 
	ether 00:0f:3d:50:13:5c
	media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps)
	status: associated
	ssid NETGEAR 1:NETGEAR
	channel 6 authmode OPEN powersavemode OFF powersavesleep 100
	rtsthreshold 2312 protmode CTS
	wepmode OFF weptxkey 1

--------------------------
$ wicontrol ath0
NIC serial number:			[  ]
Station name:				[ atlan ]
SSID for IBSS creation:			[  ]
Current netname (SSID):			[ NETGEAR ]
Desired netname (SSID):			[  ]
Current BSSID:				[ 00:09:5b:c9:b8:b8 ]
Channel list:				[ ffe ]
IBSS channel:				[ 6 ]
Current channel:			[ 6 ]
Comms quality/signal/noise:		[ 0 30 0 ]
Promiscuous mode:			[ Off ]
Intersil-Prism2 based card:		[ 1 ]
Port type (1=BSS, 3=ad-hoc):		[ 1 ]
MAC address:				[ 00:0f:3d:50:13:5c ]
TX rate (selection):			[ 0 ]
TX rate (actual speed):			[ 54 ]
RTS/CTS handshake threshold:		[ 2312 ]
Create IBSS:				[ Off ]
Access point density:			[ 1 ]
Power Mgmt (1=on, 0=off):		[ 0 ]
Max sleep time:				[ 100 ]
WEP encryption:				[ Off ]
TX encryption key:			[ 1 ]
Encryption keys:			[  ][  ][  ][  ]

--------------------------
$ less /etc/X11/xorg.conf
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	#DisplaySize	  320   240	# mm
	Identifier   "Monitor0"
	VendorName   "IBM"
	ModelName    "IBM G74"
 ### Uncomment if you don't want to default to DDC:
#	HorizSync    30.0 - 69.0
#	HorizSync    0.0 - 0.0
#	VertRefresh  50.0 - 0.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	BoardName   "NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
--------------------------

Sorry for the length of this message, I didn't want to add a lot of
attachments..
BTW, I'm using 5.2.1-RELEASE right now, everything works perfectly.  I
had configured both 5.2.1 and 5.3 the same, if there were differences,
it is in the default configuration.

--------------------------
$ less /etc/rc.conf

# -- sysinstall generated deltas -- # Fri Nov 12 11:32:10 2004
# Created: Fri Nov 12 11:32:10 2004
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
usbd_enable="YES"
network_interfaces="ath0 lo"
ifconfig_ath0="inet 192.168.0.3  netmask 255.255.255.0"
defaultrouter="192.168.0.1"
hostname="atlan"

# end of file

--------------------------

I hope someone has a solution!  I like a lot of things about 5.3.... :)

Thanks,
-daniel.higham



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cb6387b504111219264dffc565>