Date: Mon, 29 Apr 2002 21:45:55 +0200 From: Lutz Horn <lutz@lutz-horn.de> To: Mark Rowlands <mark.rowlands@minmail.net> Cc: freebsd-questions@freebsd.org Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020429194554.GA6406@lutz-horn.de> In-Reply-To: <200204291401.03502.mark.rowlands@minmail.net> References: <20020427134911.GA2993@lutz-horn.de> <20020427185238.D296@fishballoon.dyndns.org> <20020428103959.GA2782@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi Mark and the others,
thanks for your time and effort but I'm still not there.
* Mark Rowlands <mark.rowlands@minmail.net> [20020429 14:01 +0200]:
> and see what irqs are being reported as in use
OK, as you guessed irq 3 is in use by sio1. In fact the following irqs
are in use:
1 atkbd0
3 sio1
4 sio0
6 fdc0
7 ppc0
11 pcic0, pcic1, uhci0 (why this?)
12 psm0
14 ata0
> try the following pccardd.conf assuming irq 3 is not in use by
> something else.... like sio1: for example.....
>
> # pccardd.conf
>
> io 0x240-0x360
>
> irq 3
>
> # Available memory slots
> memory 0xd4000 96k
>
> # Xircom CreditCard Ethernet CE3-10/100
> card "Xircom" "CreditCard 10/100"
> config auto "xe" ?
> insert /etc/pccard_ether $device start
> remove /etc/pccard_ether $device stop
If I use pccardc to dump information about the card I get a list of irqs
the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the
intersection
{i|i is irq not in use} ^ {j|j is irq card likes} = {2, 5, 9, 10, 15}
in the irq line in /etc/pccard.conf. Starting pccardd with this
configurations still fails :-( With debuglevel set to 4 I get the
following output from pccardd:
1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100")
[CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)]
[(null)]
2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card
addr 0x0, flags 0x41
3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16
4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to
0x41, Reset time = 50 ms
5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240,
size 0x10 flags 0x7
6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem
0xd4000, 4096 bytes, irq 11, flags 0
7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for
Xircom(CreditCard 10/100): Device not configured
8 Apr 29 21:31:48 pccardd[148]: pccardd started
What puzzles me is that in line 6 the correct device "xe0" and the
correct io range "0x240-24f" are reported. But the irq is reported as
"11" which is a) already in use and b) not in the list of irqs in
/etc/pccard.conf.
Any ideas?
Regards
Lutz
--
Lutz Horn <lutz@lutz-horn.de> | GnuPG: 1024D/6EBDA359 1999-09-20
438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE8zaLyzQ+com69o1kRAuadAKCZ+frv9yRLBqdKOhEGRb4hnEwu6gCgiQVK
GsArJbIGkkCD537Ira684+w=
=JJ1X
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020429194554.GA6406>