Date: Mon, 10 Dec 2001 14:12:26 +0100 From: Morsal Roudbay <morsal@swipnet.se> To: freebsd-stable@FreeBSD.org Subject: Re: cant build kernel (4.4-STABLE) - linux module broken Message-ID: <20011210131226.GB67546@zigman.2y.net> In-Reply-To: <20011210125925.GA67401@zigman.2y.net> References: <20011210125925.GA67401@zigman.2y.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Mon, Dec 10, 2001 at 01:59:25PM +0100, Morsal Rodbay wrote:
> Hi,
> I cvsuped last night (4.4-STABLE) and then tried to compile the kernel but I
> got an error.. I've attached dmesg and the error.
>
> I cvsuped today too but the problem still exists.. I've looked through my
> config file and there is nothing wrong with it.
>
> The reason why I want to upgrade my kernel is that I'm hoping to get rid of
> the crashing caused by heavy disk access.. (reffering to the ATA driver
> discussed earlier in another thread)
Sorry, forgot to attach the two files... :)
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #6: Sat Nov 24 11:54:30 CET 2001
mr@darius.2y.net:/usr/obj/usr/src/sys/TUNED
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 1073741824 (1048576K bytes)
avail memory = 1040666624 (1016276K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03ce000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fde50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 18 -> irq 16
IOAPIC #0 intpin 19 -> irq 17
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 18
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 18
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
sym0: <875> port 0xe400-0xe4ff mem 0xed001000-0xed001fff,0xed003000-0xed0030ff irq 2 at device 9.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym0: SCAN FOR LUNS disabled for targets 8 9 10 11 12 13 14 15.
de0: <Digital 21140A Fast Ethernet> port 0xe800-0xe87f mem 0xed000000-0xed00007f irq 16 at device 10.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:80:c8:4d:f1:52
dc0: <82c169 PNIC 10/100BaseTX> port 0xec00-0xecff mem 0xed002000-0xed0020ff irq 17 at device 11.0 on pci0
dc0: Ethernet address: 00:a0:cc:51:56:4b
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1200> PRINTER PJL,MLC,PCL,PCLXL,POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled
SMP: AP CPU #1 Launched!
ad0: 6208MB <ST36530A> [13456/15/63] at ata0-master UDMA33
ad2: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata1-master UDMA33
acd0: CDROM <CD-540E> at ata0-slave using PIO4
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
WARNING: / was not properly dismounted
de0: enabling 100baseTX port
IP Filter: already initialized
pid 726 (tar), uid 0 on /backup: file system full
stray irq 7
de0: abnormal interrupt: transmit underflow (raising TX threshold to 96|256)
de0: abnormal interrupt: transmit underflow (raising TX threshold to 128|512)
pid 52607 (tar), uid 0 on /backup: file system full
stray irq 7
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="make.error"
cd ../../modules ; env MAKEOBJDIRPREFIX=/usr/src/sys/compile/TUNED/modules make obj ; env MAKEOBJDIRPREFIX=/usr/src/sys/compile/TUNED/modules make all
===> accf_data
===> accf_http
===> agp
===> aha
===> amr
===> an
===> aue
===> bge
===> bridge
===> ccd
===> cd9660
===> coda
===> cue
===> dc
===> dummynet
===> fdesc
===> fxp
===> gx
===> if_disc
===> if_ef
===> if_gif
===> if_ppp
===> if_sl
===> if_stf
===> if_tap
===> if_tun
===> if_vlan
===> ip6fw
===> ipfilter
===> ipfw
===> ispfw
===> joy
===> kernfs
===> kue
===> lge
===> libmchain
===> linux
===> md
===> mfs
===> mii
===> mlx
===> msdos
===> ncp
===> pcn
===> netgraph
===> netgraph/async
===> netgraph/bpf
===> netgraph/bridge
===> netgraph/cisco
===> netgraph/echo
===> netgraph/ether
===> netgraph/frame_relay
===> netgraph/hole
===> netgraph/iface
===> netgraph/ksocket
===> netgraph/lmi
===> netgraph/netgraph
===> netgraph/one2many
===> netgraph/ppp
===> netgraph/pppoe
===> netgraph/pptpgre
===> netgraph/rfc1490
===> netgraph/socket
===> netgraph/tee
===> netgraph/tty
===> netgraph/UI
===> netgraph/vjc
===> netgraph/mppc
===> nfs
===> nge
===> nmdm
===> ntfs
===> nullfs
===> nwfs
===> portal
===> procfs
===> rl
===> sf
===> sis
===> sk
===> sound
===> sound/pcm
===> sound/driver
===> sound/driver/ad1816
===> sound/driver/als4000
===> sound/driver/cmi
===> sound/driver/cs4281
===> sound/driver/csa
===> sound/driver/ds1
===> sound/driver/emu10k1
===> sound/driver/es137x
===> sound/driver/ess
===> sound/driver/fm801
===> sound/driver/ich
===> sound/driver/maestro
===> sound/driver/maestro3
===> sound/driver/mss
===> sound/driver/neomagic
===> sound/driver/sb16
===> sound/driver/sb8
===> sound/driver/sbc
===> sound/driver/solo
===> sound/driver/t4dwave
===> sound/driver/via82c686
===> sound/driver/vibes
===> sound/snd
===> ste
===> syscons
===> syscons/blank
===> syscons/daemon
===> syscons/fade
===> syscons/fire
===> syscons/green
===> syscons/logo
===> syscons/rain
===> syscons/snake
===> syscons/star
===> syscons/warp
===> syscons/apm
===> ti
===> tl
===> twe
===> txp
===> ugen
===> uhid
===> ukbd
===> ulpt
===> umapfs
===> umass
===> umodem
===> ums
===> union
===> usb
===> uscanner
===> vinum
===> vn
===> vpo
===> vr
===> wb
===> wx
===> xl
===> aac
===> asr
===> bktr
===> bktr/bktr
===> bktr/bktr_mem
===> coff
===> fpu
===> gnufpu
===> ibcs2
===> linprocfs
===> mly
===> ray
===> smbfs
===> splash
===> splash/bmp
===> splash/pcx
===> streams
===> svr4
===> vesa
===> wi
===> accf_data
===> accf_http
===> agp
===> aha
===> amr
===> an
===> aue
===> bge
===> bridge
===> ccd
===> cd9660
===> coda
===> cue
===> dc
===> dummynet
===> fdesc
===> fxp
===> gx
===> if_disc
===> if_ef
===> if_gif
===> if_ppp
===> if_sl
===> if_stf
===> if_tap
===> if_tun
===> if_vlan
===> ip6fw
===> ipfilter
===> ipfw
===> ispfw
===> joy
===> kernfs
===> kue
===> lge
===> libmchain
===> linux
cc -O -pipe -march=pentiumpro -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/../include -mpreferred-stack-boundary=2 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -c linux_sysent.c
*** Error code 1
Stop in /usr/src/sys/modules/linux.
*** Error code 1
Stop in /usr/src/sys/modules.
*** Error code 1
Stop in /usr/src/sys/compile/TUNED.
--8t9RHnE3ZwKMSgU+--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011210131226.GB67546>