Date: Sat, 24 Mar 2007 18:49:28 +0900 From: gnn@freebsd.org To: current@freebsd.org Subject: LOR with latest ACPI code... Message-ID: <m27it7km3b.wl%gnn@neville-neil.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
When trying to suspend (zzz) my Fujitsu P7010D Lifebook (dmesg
attached) I get this:
fwohci0: fwohci_pci_suspend
acquiring duplicate lock of same type: "acpica subsystem lock"
1st acpica subsystem lock @ /usr/src/sys/dev/acpica/Osd/OsdSynch.c:363
2nd acpica subsystem lock @ /usr/src/sys/dev/acpica/Osd/OsdSynch.c:363
KDB: stack backtrace:
db_trace_self_wrapper(c07913f0) at db_trace_self_wrapper+0x25
kdb_backtrace(d49e4afc,fc00,c0831bf8,c0831bf8,c07dda64,...) at kdb_backtrace+0x29
witness_checkorder(c2933200,9,c076f09e,16b) at witness_checkorder+0x586
_mtx_lock_flags(c2933200,0,c076f09e,16b,d49e4b58,...) at _mtx_lock_flags+0x84
AcpiOsAcquireLock(c2933200,3,0,0,3,...) at AcpiOsAcquireLock+0x21
AcpiEvWalkGpeList(c04644cc) at AcpiEvWalkGpeList+0x19
AcpiHwClearAcpiStatus(39e4b90,c0722c45,c0886440,c29ce700,cca98168,...) at AcpiHwClearAcpiStatus+0x5a
AcpiEnterSleepState(3) at AcpiEnterSleepState+0x7d
acpi_sleep_machdep(c29ce700,3) at acpi_sleep_machdep+0x287
acpi_SetSleepState(c29ce700,3) at acpi_SetSleepState+0x1ef
acpiioctl(c29f6100,80045003,c2b72180,3,c2c7d000,...) at acpiioctl+0xa3
devfs_ioctl_f(c2c97558,80045003,c2b72180,c2f08080,c2c7d000) at devfs_ioctl_f+0xaf
kern_ioctl(c2c7d000,3,80045003,c2b72180) at kern_ioctl+0x296
ioctl(c2c7d000,d49e4d00) at ioctl+0xf1
syscall(d49e4d38) at syscall+0x252
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (54, FreeBSD ELF32, ioctl), eip = 0x2814929f, esp = 0xbfbfe90c, ebp = 0xbfbfea08 ---
acpi: suspend request ignored (not ready yet)
Although the machine suspends and resumes, the display is dead. I can
still ssh into it, but I cannot revive the display:
shonan ? sudo sysctl hw.acpi.video.
hw.acpi.video.crt0.active: 0
hw.acpi.video.lcd0.active: 0
hw.acpi.video.tv0.active: 0
hw.acpi.video.ext0.active: 0
shonan ? sudo sysctl hw.acpi.video.lcd0.active=1
hw.acpi.video.lcd0.active: 0 -> 0
I'm willing to test patches etc. as this is very close to being a very
nice little, workable, FreeBSD CURRENT box.
Thanks,
George
[-- Attachment #2 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Fri Mar 23 10:59:12 UTC 2007
root@shonan:/usr/obj/usr/src/sys/SHONAN
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.10GHz (1100.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 527368192 (502 MB)
avail memory = 506408960 (482 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ACPI: RSDP @ 0x0xf5d80/0x0014 (v 0 FUJ )
ACPI: RSDT @ 0x0x1f6f4c92/0x0030 (v 1 FUJ FJNB189 0x01080000 FUJ 0x00000100)
ACPI: FACP @ 0x0x1f6faf8c/0x0074 (v 1 FUJ FJNB189 0x01080000 FUJ 0x00000100)
ACPI: DSDT @ 0x0x1f6f4cc2/0x5E80 (v 1 FUJ FJNB189 0x01080000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x1f6fbfc0/0x0040
ACPI: SSDT @ 0x0x1f6fab42/0x0254 (v 1 FUJ FJNB189 0x01080000 INTL 0x20030522)
ACPI: BOOT @ 0x0x1f6faf64/0x0028 (v 1 FUJ FJNB189 0x01080000 FUJ 0x00000100)
acpi0: <FUJ FJNB189> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
drm0: <Intel i852GM/i855GM GMCH> on vgapci0
info: [drm] AGP at 0xd8000000 128MB
info: [drm] Initialized i915 1.5.0 20060119
vgapci1: <VGA-compatible display> mem 0xe0000000-0xe7ffffff,0xd0080000-0xd00fffff at device 2.1 on pci0
drm1: <Intel i852GM/i855GM GMCH> on vgapci1
info: [drm] AGP at 0xd8000000 128MB
info: [drm] Initialized i915 1.5.0 20060119
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xd0210000-0xd02107ff irq 11 at device 10.2 on pci1
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:03:02:f5:25
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:0e:02:f5:25
fwe0: Ethernet address: 02:00:0e:02:f5:25
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci1: <base peripheral> at device 10.3 (no driver attached)
pci1: <base peripheral> at device 10.4 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xd0211000-0xd02110ff irq 11 at device 12.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0b:5d:78:39:42
rl0: [ITHREAD]
ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 13.0 on pci1
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:11:f5:22:2b:3d
ath0: mac 5.6 phy 4.1 radio 3.6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 0
acpi_fujitsu0: <Fujitsu Function Hotkeys FUJ02B1> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.13, addr 2> on uhub2
Timecounter "TSC" frequency 1100045851 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
fwohci0: fwohci_pci_suspend
acquiring duplicate lock of same type: "acpica subsystem lock"
1st acpica subsystem lock @ /usr/src/sys/dev/acpica/Osd/OsdSynch.c:363
2nd acpica subsystem lock @ /usr/src/sys/dev/acpica/Osd/OsdSynch.c:363
KDB: stack backtrace:
db_trace_self_wrapper(c07913f0) at db_trace_self_wrapper+0x25
kdb_backtrace(d49e4afc,fc00,c0831bf8,c0831bf8,c07dda64,...) at kdb_backtrace+0x29
witness_checkorder(c2933200,9,c076f09e,16b) at witness_checkorder+0x586
_mtx_lock_flags(c2933200,0,c076f09e,16b,d49e4b58,...) at _mtx_lock_flags+0x84
AcpiOsAcquireLock(c2933200,3,0,0,3,...) at AcpiOsAcquireLock+0x21
AcpiEvWalkGpeList(c04644cc) at AcpiEvWalkGpeList+0x19
AcpiHwClearAcpiStatus(39e4b90,c0722c45,c0886440,c29ce700,cca98168,...) at AcpiHwClearAcpiStatus+0x5a
AcpiEnterSleepState(3) at AcpiEnterSleepState+0x7d
acpi_sleep_machdep(c29ce700,3) at acpi_sleep_machdep+0x287
acpi_SetSleepState(c29ce700,3) at acpi_SetSleepState+0x1ef
acpiioctl(c29f6100,80045003,c2b72180,3,c2c7d000,...) at acpiioctl+0xa3
devfs_ioctl_f(c2c97558,80045003,c2b72180,c2f08080,c2c7d000) at devfs_ioctl_f+0xaf
kern_ioctl(c2c7d000,3,80045003,c2b72180) at kern_ioctl+0x296
ioctl(c2c7d000,d49e4d00) at ioctl+0xf1
syscall(d49e4d38) at syscall+0x252
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (54, FreeBSD ELF32, ioctl), eip = 0x2814929f, esp = 0xbfbfe90c, ebp = 0xbfbfea08 ---
acpi: suspend request ignored (not ready yet)
fwohci0: device physically ejected?
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: Initiate bus reset
wakeup from sleeping state (slept 00:00:55)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: unrecoverable error
ugen0: at uhub2 port 1 (addr 2) disconnected
ugen0: detached
ugen0: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.13, addr 2> on uhub2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m27it7km3b.wl%gnn>