Date: Tue, 12 Jun 2018 13:26:31 +0000 (UTC) From: Diane Bruce <db@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r334997 - in head/sys: arm64/conf conf dev/uart modules/uart Message-ID: <201806121326.w5CDQV6Y095535@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: db (ports committer) Date: Tue Jun 12 13:26:31 2018 New Revision: 334997 URL: https://svnweb.freebsd.org/changeset/base/334997 Log: Add a driver for the BCM2835 Mini-UART as seen on the RPi3 Reviewed by: andrew Approved by: andrew Differential Revision: https://reviews.freebsd.org/D15684 Added: head/sys/dev/uart/uart_dev_mu.c (contents, props changed) Modified: head/sys/arm64/conf/GENERIC (contents, props changed) head/sys/conf/files.arm64 (contents, props changed) head/sys/modules/uart/Makefile (contents, props changed) Modified: head/sys/arm64/conf/GENERIC ============================================================================== --- head/sys/arm64/conf/GENERIC Tue Jun 12 11:47:21 2018 (r334996) +++ head/sys/arm64/conf/GENERIC Tue Jun 12 13:26:31 2018 (r334997) @@ -165,6 +165,7 @@ device dwmmc # Serial (COM) ports device uart # Generic UART driver device uart_msm # Qualcomm MSM UART driver +device uart_mu # RPI3 aux port device uart_mvebu # Armada 3700 UART driver device uart_ns8250 # ns8250-type UART driver device uart_snps Modified: head/sys/conf/files.arm64 ============================================================================== --- head/sys/conf/files.arm64 Tue Jun 12 11:47:21 2018 (r334996) +++ head/sys/conf/files.arm64 Tue Jun 12 13:26:31 2018 (r334997) @@ -209,6 +209,7 @@ dev/pci/pci_host_generic_fdt.c optional pci fdt dev/psci/psci.c standard dev/psci/psci_arm64.S standard dev/uart/uart_cpu_arm64.c optional uart +dev/uart/uart_dev_mu.c optional uart uart_mu dev/uart/uart_dev_pl011.c optional uart pl011 dev/usb/controller/dwc_otg_hisi.c optional dwcotg fdt soc_hisi_hi6220 dev/usb/controller/ehci_mv.c optional ehci_mv fdt Added: head/sys/dev/uart/uart_dev_mu.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/uart/uart_dev_mu.c Tue Jun 12 13:26:31 2018 (r334997) @@ -0,0 +1,521 @@ +/*- + * Copyright (c) 2018 Diane Bruce + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * Based on uart_dev_pl011.c + * Copyright (c) 2012 Semihalf. + * All rights reserved. + */ +/* + * The mini Uart has the following features: + * - 7 or 8 bit operation. + * - 1 start and 1 stop bit. + * - No parities. + * - Break generation. + * - 8 symbols deep FIFOs for receive and transmit. + * - SW controlled RTS, SW readable CTS. + * - Auto flow control with programmable FIFO level. + * - 16550 like registers. + * - Baudrate derived from system clock. + * This is a mini UART and it does NOT have the following capabilities: + * - Break detection + * - Framing errors detection. + * - Parity bit + * - Receive Time-out interrupt + * - DCD, DSR, DTR or RI signals. + * The implemented UART is not a 16650 compatible UART However as far + * as possible the first 8 control and status registers are laid out + * like a 16550 UART. All 16550 register bits which are not supported can + * be written but will be ignored and read back as 0. All control bits + * for simple UART receive/transmit operations are available. + */ + +#include "opt_acpi.h" +#include "opt_platform.h" + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/kernel.h> +#include <sys/bus.h> + +#include <machine/bus.h> +#include <machine/machdep.h> +#include <machine/pcpu.h> + +#include <dev/uart/uart.h> +#include <dev/uart/uart_cpu.h> +#ifdef FDT +#include <dev/uart/uart_cpu_fdt.h> +#include <dev/ofw/ofw_bus.h> +#endif +#include <dev/uart/uart_bus.h> +#include "uart_if.h" + +/* BCM2835 Micro UART registers and masks*/ +#define AUX_MU_IO_REG 0x00 /* I/O register */ + +/* + * According to errata bits 1 and 2 are swapped, + * Also bits 2 and 3 are required to enable interrupts. + */ +#define AUX_MU_IER_REG 0x01 +#define IER_RXENABLE (1) +#define IER_TXENABLE (1<<1) +#define IER_REQUIRED (3<<2) +#define IER_MASK_ALL (IER_TXENABLE|IER_RXENABLE) + +#define AUX_MU_IIR_REG 0x02 +#define IIR_READY (1) +#define IIR_TXREADY (1<<1) +#define IIR_RXREADY (1<<2) +#define IIR_CLEAR (3<<1) + +#define AUX_MU_LCR_REG 0x03 +#define LCR_WLEN7 (0) +#define LCR_WLEN8 (3) + +#define AUX_MU_MCR_REG 0x04 +#define AUX_MCR_RTS (1<<1) + +#define AUX_MU_LSR_REG 0x05 +#define LSR_RXREADY (1) +#define LSR_OVRRUN (1<<1) +#define LSR_TXEMPTY (1<<5) +#define LSR_TXIDLE (1<<6) + +#define AUX_MU_MSR_REG 0x06 +#define MSR_CTS (1<<5) + +#define AUX_MU_SCRATCH_REG 0x07 + +#define AUX_MU_CNTL_REG 0x08 +#define CNTL_RXENAB (1) +#define CNTL_TXENAB (1<<1) + +#define AUX_MU_STAT_REG 0x09 +#define STAT_TX_SA (1<<1) +#define STAT_RX_SA (1) + +#define AUX_MU_BAUD_REG 0x0a + +/* + * FIXME: actual register size is SoC-dependent, we need to handle it + */ +#define __uart_getreg(bas, reg) \ + bus_space_read_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg)) +#define __uart_setreg(bas, reg, value) \ + bus_space_write_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg), value) + +/* + * Low-level UART interface. + */ +static int uart_mu_probe(struct uart_bas *bas); +static void uart_mu_init(struct uart_bas *bas, int, int, int, int); +static void uart_mu_term(struct uart_bas *bas); +static void uart_mu_putc(struct uart_bas *bas, int); +static int uart_mu_rxready(struct uart_bas *bas); +static int uart_mu_getc(struct uart_bas *bas, struct mtx *); + +static struct uart_ops uart_mu_ops = { + .probe = uart_mu_probe, + .init = uart_mu_init, + .term = uart_mu_term, + .putc = uart_mu_putc, + .rxready = uart_mu_rxready, + .getc = uart_mu_getc, +}; + +static int +uart_mu_probe(struct uart_bas *bas) +{ + + return (0); +} + +/* + * According to the docs, the cpu clock is locked to 250Mhz when + * the micro-uart is used + */ +#define CPU_CLOCK 250000000 + +static void +uart_mu_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, + int parity) +{ + uint32_t line; + uint32_t baud; + + /* + * Zero all settings to make sure + * UART is disabled and not configured + */ + line = 0x0; + __uart_setreg(bas, AUX_MU_CNTL_REG, line); + + /* As I know UART is disabled I can setup the line */ + switch (databits) { + case 7: + line |= LCR_WLEN7; + break; + case 6: + case 8: + default: + line |= LCR_WLEN8; + break; + } + + __uart_setreg(bas, AUX_MU_LCR_REG, line); + + /* See 2.2.1 BCM2835-ARM-Peripherals baudrate */ + if (baudrate != 0) { + baud = CPU_CLOCK / (8 * baudrate); + /* XXX + * baud = cpu_clock() / (8 * baudrate); + */ + __uart_setreg(bas, AUX_MU_BAUD_REG, ((uint32_t)(baud & 0xFFFF))); + } + + /* re-enable UART */ + __uart_setreg(bas, AUX_MU_CNTL_REG, CNTL_RXENAB|CNTL_TXENAB); +} + +static void +uart_mu_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, + int parity) +{ + + /* Mask all interrupts */ + __uart_setreg(bas, AUX_MU_IER_REG, 0); + uart_mu_param(bas, baudrate, databits, stopbits, parity); +} + +static void +uart_mu_term(struct uart_bas *bas) +{ +} + +static void +uart_mu_putc(struct uart_bas *bas, int c) +{ + + /* Wait when TX FIFO full. Push character otherwise. */ + while ((__uart_getreg(bas, AUX_MU_LSR_REG) & LSR_TXEMPTY) == 0) + ; + __uart_setreg(bas, AUX_MU_IO_REG, c & 0xff); +} + +static int +uart_mu_rxready(struct uart_bas *bas) +{ + + return ((__uart_getreg(bas, AUX_MU_LSR_REG) & LSR_RXREADY) != 0); +} + +static int +uart_mu_getc(struct uart_bas *bas, struct mtx *hwmtx) +{ + int c; + + while(!uart_mu_rxready(bas)) + ; + c = __uart_getreg(bas, AUX_MU_IO_REG) & 0xff; + return (c); +} + +/* + * High-level UART interface. + */ +struct uart_mu_softc { + struct uart_softc bas; + uint16_t aux_ier; /* Interrupt mask */ +}; + +static int uart_mu_bus_attach(struct uart_softc *); +static int uart_mu_bus_detach(struct uart_softc *); +static int uart_mu_bus_flush(struct uart_softc *, int); +static int uart_mu_bus_getsig(struct uart_softc *); +static int uart_mu_bus_ioctl(struct uart_softc *, int, intptr_t); +static int uart_mu_bus_ipend(struct uart_softc *); +static int uart_mu_bus_param(struct uart_softc *, int, int, int, int); +static int uart_mu_bus_probe(struct uart_softc *); +static int uart_mu_bus_receive(struct uart_softc *); +static int uart_mu_bus_setsig(struct uart_softc *, int); +static int uart_mu_bus_transmit(struct uart_softc *); +static void uart_mu_bus_grab(struct uart_softc *); +static void uart_mu_bus_ungrab(struct uart_softc *); + +static kobj_method_t uart_mu_methods[] = { + KOBJMETHOD(uart_attach, uart_mu_bus_attach), + KOBJMETHOD(uart_detach, uart_mu_bus_detach), + KOBJMETHOD(uart_flush, uart_mu_bus_flush), + KOBJMETHOD(uart_getsig, uart_mu_bus_getsig), + KOBJMETHOD(uart_ioctl, uart_mu_bus_ioctl), + KOBJMETHOD(uart_ipend, uart_mu_bus_ipend), + KOBJMETHOD(uart_param, uart_mu_bus_param), + KOBJMETHOD(uart_probe, uart_mu_bus_probe), + KOBJMETHOD(uart_receive, uart_mu_bus_receive), + KOBJMETHOD(uart_setsig, uart_mu_bus_setsig), + KOBJMETHOD(uart_transmit, uart_mu_bus_transmit), + KOBJMETHOD(uart_grab, uart_mu_bus_grab), + KOBJMETHOD(uart_ungrab, uart_mu_bus_ungrab), + + { 0, 0 } +}; + +static struct uart_class uart_mu_class = { + "aux-uart", + uart_mu_methods, + sizeof(struct uart_mu_softc), + .uc_ops = &uart_mu_ops, + .uc_range = 0x48, + .uc_rclk = 0, + .uc_rshift = 2 +}; + +#ifdef FDT +static struct ofw_compat_data fdt_compat_data[] = { + {"brcm,bcm2835-aux-uart" , (uintptr_t)&uart_mu_class}, + {NULL, (uintptr_t)NULL}, +}; +UART_FDT_CLASS_AND_DEVICE(fdt_compat_data); +#endif + +static int +uart_mu_bus_attach(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + + psc = (struct uart_mu_softc *)sc; + bas = &sc->sc_bas; + /* Clear interrupts */ + __uart_setreg(bas, AUX_MU_IIR_REG, IIR_CLEAR); + /* Enable interrupts */ + psc->aux_ier = (IER_RXENABLE|IER_TXENABLE|IER_REQUIRED); + __uart_setreg(bas, AUX_MU_IER_REG, psc->aux_ier); + sc->sc_txbusy = 0; + + return (0); +} + +static int +uart_mu_bus_detach(struct uart_softc *sc) +{ + + return (0); +} + +static int +uart_mu_bus_flush(struct uart_softc *sc, int what) +{ + + return (0); +} + +static int +uart_mu_bus_getsig(struct uart_softc *sc) +{ + + return (0); +} + +static int +uart_mu_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) +{ + struct uart_bas *bas; + int error; + + bas = &sc->sc_bas; + error = 0; + uart_lock(sc->sc_hwmtx); + switch (request) { + case UART_IOCTL_BREAK: + break; + case UART_IOCTL_BAUD: + *(int*)data = 115200; + break; + default: + error = EINVAL; + break; + } + uart_unlock(sc->sc_hwmtx); + + return (error); +} + +static int +uart_mu_bus_ipend(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + uint32_t ints; + int ipend; + + psc = (struct uart_mu_softc *)sc; + bas = &sc->sc_bas; + + uart_lock(sc->sc_hwmtx); + ints = __uart_getreg(bas, AUX_MU_IIR_REG); + ipend = 0; + + /* + * According to docs only one of IIR_RXREADY + * or IIR_TXREADY are valid eg. Only one or the other. + */ + if (ints & IIR_RXREADY) { + ipend |= SER_INT_RXREADY; + } else if (ints & IIR_TXREADY) { + if (__uart_getreg(bas, AUX_MU_LSR_REG) & LSR_TXIDLE) { + if (sc->sc_txbusy) + ipend |= SER_INT_TXIDLE; + + /* Disable TX interrupt */ + __uart_setreg(bas, AUX_MU_IER_REG, + psc->aux_ier & ~IER_TXENABLE); + } + } + + uart_unlock(sc->sc_hwmtx); + + return (ipend); +} + +static int +uart_mu_bus_param(struct uart_softc *sc, int baudrate, int databits, + int stopbits, int parity) +{ + + uart_lock(sc->sc_hwmtx); + uart_mu_param(&sc->sc_bas, baudrate, databits, stopbits, parity); + uart_unlock(sc->sc_hwmtx); + + return (0); +} + +static int +uart_mu_bus_probe(struct uart_softc *sc) +{ + + /* MU always has 8 byte deep fifo */ + sc->sc_rxfifosz = 8; + sc->sc_txfifosz = 8; + device_set_desc(sc->sc_dev, "BCM2835 Mini-UART"); + + return (0); +} + +static int +uart_mu_bus_receive(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + uint32_t lsr, xc; + int rx; + + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + psc = (struct uart_mu_softc *)sc; + + lsr = __uart_getreg(bas, AUX_MU_LSR_REG); + while (lsr & LSR_RXREADY) { + xc = __uart_getreg(bas, AUX_MU_IO_REG); + rx = xc & 0xff; + if (uart_rx_full(sc)) { + sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN; + break; + } + uart_rx_put(sc, rx); + lsr = __uart_getreg(bas, AUX_MU_LSR_REG); + } + uart_unlock(sc->sc_hwmtx); + + return (0); +} + +static int +uart_mu_bus_setsig(struct uart_softc *sc, int sig) +{ + + return (0); +} + +static int +uart_mu_bus_transmit(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + int i; + + psc = (struct uart_mu_softc *)sc; + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + + for (i = 0; i < sc->sc_txdatasz; i++) { + __uart_setreg(bas, AUX_MU_IO_REG, sc->sc_txbuf[i] & 0xff); + uart_barrier(bas); + } + + /* Mark busy and enable TX interrupt */ + sc->sc_txbusy = 1; + __uart_setreg(bas, AUX_MU_IER_REG, psc->aux_ier); + + uart_unlock(sc->sc_hwmtx); + + return (0); +} + +static void +uart_mu_bus_grab(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + + psc = (struct uart_mu_softc *)sc; + bas = &sc->sc_bas; + + /* Disable interrupts on switch to polling */ + uart_lock(sc->sc_hwmtx); + __uart_setreg(bas, AUX_MU_IER_REG, psc->aux_ier &~IER_MASK_ALL); + uart_unlock(sc->sc_hwmtx); +} + +static void +uart_mu_bus_ungrab(struct uart_softc *sc) +{ + struct uart_mu_softc *psc; + struct uart_bas *bas; + + psc = (struct uart_mu_softc *)sc; + bas = &sc->sc_bas; + + /* Switch to using interrupts while not grabbed */ + uart_lock(sc->sc_hwmtx); + __uart_setreg(bas, AUX_MU_CNTL_REG, CNTL_RXENAB|CNTL_TXENAB); + __uart_setreg(bas, AUX_MU_IER_REG, psc->aux_ier); + uart_unlock(sc->sc_hwmtx); +} Modified: head/sys/modules/uart/Makefile ============================================================================== --- head/sys/modules/uart/Makefile Tue Jun 12 11:47:21 2018 (r334996) +++ head/sys/modules/uart/Makefile Tue Jun 12 13:26:31 2018 (r334997) @@ -23,14 +23,15 @@ uart_cpu_machine= ${_uart_cpu} .if ${MACHINE} == "arm64" uart_dev_mvebu=uart_dev_mvebu.c +uart_dev_mu=uart_dev_mu.c .endif KMOD= uart SRCS= uart_bus_acpi.c ${uart_bus_ebus} uart_bus_isa.c uart_bus_pccard.c \ uart_bus_pci.c uart_bus_puc.c uart_bus_scc.c \ uart_core.c ${uart_cpu_machine} uart_dbg.c \ - ${uart_dev_mvebu} uart_dev_ns8250.c uart_dev_quicc.c \ - uart_dev_sab82532.c uart_dev_z8530.c \ + ${uart_dev_mvebu} uart_dev_ns8250.c ${uart_dev_mu} \ + uart_dev_quicc.c uart_dev_sab82532.c uart_dev_z8530.c \ uart_if.c uart_if.h uart_subr.c uart_tty.c SRCS+= acpi_if.h bus_if.h card_if.h device_if.h isa_if.h ${ofw_bus_if} \
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201806121326.w5CDQV6Y095535>