Date: Mon, 11 Jun 2001 14:30:29 +0200 (SAT) From: John Hay <jhay@icomtek.csir.co.za> To: current@freebsd.org Subject: TI-1225 and -current OLDCARD problem Message-ID: <200106111230.f5BCUTM60905@zibbi.icomtek.csir.co.za>
next in thread | raw e-mail | index | archive | help
I have tried the new OLDCARD code in -current on a desktop with an Orinoco/
Lucent PCI Cardbus bridge (TI PCI-1225) and a Lucent 802.11 card. I found
that the kernel would hang almost at the end of the boot process with the
last message "pccard: card inserted, slot 1". But those cards only have
slot 0, so on a whim I hacked pccard/pcic_pci.c to only probe/attach the
first function on the card and not the second one and I have a working
system.
My very crude hack looks like this:
--- /sys/pccard/pcic_pci.c.org Sat Jun 9 14:16:16 2001
+++ /sys/pccard/pcic_pci.c Mon Jun 11 10:12:36 2001
@@ -354,6 +354,7 @@
struct pcic_pci_table *itm;
struct resource *res;
int rid;
+ int func;
device_id = pci_get_devid(dev);
desc = NULL;
@@ -373,6 +374,12 @@
if (desc == NULL)
return (ENXIO);
device_set_desc(dev, desc);
+
+ func = pci_get_function(dev);
+ if(func == 1) {
+ printf("Leave second slot alone\n");
+ return (ENXIO);
+ }
/*
* Take us out of power down mode.
One thing that I noticed is that with a verbose boot with the original
code (attached at the end of my email), is that slot 0 give "stat is 4c"
while the phantom slot 1 gives "stat is c". Maybe that can be used to
detect that it is a phantom slot or maybe a timeout can be implemented?
I do know that when the machine is hanging at the end of the boot, I
can still break into the debugger, so the machine is totally gone. I
guess it is just sitting in some kind of loop waiting for something
from the phantom slot.
One question, why do I see 2 "card inserted" messages for each slot?
Even with my hacked up version I see 2 "pccard: card inserted, slot 0"
messages from the kernel.
John
--
John Hay -- John.Hay@icomtek.csir.co.za
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -v
SMAP type=01 base=00000000 00000000 len=00000000 000a0000
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 07efc000
SMAP type=03 base=00000000 07ffc000 len=00000000 00003000
SMAP type=04 base=00000000 07fff000 len=00000000 00001000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Jun 9 19:49:22 SAST 2001
jhay@d-5-71.icomtek.csir.co.za:/usr/src/sys/compile/PCIPCMCIA
Setting adv 0 at to isa (string)
Setting aha 0 at to isa (string)
Setting aic 0 at to isa (string)
Setting apm 0 at to nexus (string)
Setting apm 0 disabled to 1 (int)
Setting apm 0 flags to 32 (int)
Setting ata 0 at to isa (string)
Setting ata 0 irq to 14 (int)
Setting ata 0 port to 496 (int)
Setting ata 1 at to isa (string)
Setting ata 1 irq to 15 (int)
Setting ata 1 port to 368 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 flags to 1 (int)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting bt 0 at to isa (string)
Setting cs 0 at to isa (string)
Setting cs 0 port to 768 (int)
Setting ed 0 at to isa (string)
Setting ed 0 irq to 10 (int)
Setting ed 0 maddr to 884736 (int)
Setting ed 0 port to 640 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fd 1 at to fdc0 (string)
Setting fd 1 drive to 1 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting fe 0 at to isa (string)
Setting fe 0 port to 768 (int)
Setting ie 0 at to isa (string)
Setting ie 0 irq to 10 (int)
Setting ie 0 maddr to 851968 (int)
Setting ie 0 port to 768 (int)
Setting le 0 at to isa (string)
Setting le 0 irq to 5 (int)
Setting le 0 maddr to 851968 (int)
Setting le 0 port to 768 (int)
Setting lnc 0 at to isa (string)
Setting lnc 0 drq to 0 (int)
Setting lnc 0 irq to 10 (int)
Setting lnc 0 port to 640 (int)
Setting npx 0 at to nexus (string)
Setting npx 0 irq to 13 (int)
Setting npx 0 port to 240 (int)
Setting pcic 0 at to isa (string)
Setting pcic 0 disabled to 1 (int)
Setting pcic 0 irq to 10 (int)
Setting pcic 0 maddr to 851968 (int)
Setting pcic 0 port to 992 (int)
Setting pcic 1 at to isa (string)
Setting pcic 1 disabled to 1 (int)
Setting pcic 1 irq to 11 (int)
Setting pcic 1 maddr to 868352 (int)
Setting pcic 1 port to 994 (int)
Setting pmtimer 0 at to isa (string)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sc 0 flags to 256 (int)
Setting sio 0 at to isa (string)
Setting sio 0 flags to 16 (int)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting sio 2 at to isa (string)
Setting sio 2 disabled to 1 (int)
Setting sio 2 irq to 5 (int)
Setting sio 2 port to 1000 (int)
Setting sio 3 at to isa (string)
Setting sio 3 disabled to 1 (int)
Setting sio 3 irq to 9 (int)
Setting sio 3 port to 744 (int)
Setting sn 0 at to isa (string)
Setting sn 0 irq to 10 (int)
Setting sn 0 port to 768 (int)
Setting vga 0 at to isa (string)
Setting vt 0 at to isa (string)
Calibrating clock(s) ... TSC clock: 664924976 Hz, i8254 clock: 1193102 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 664972605 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (664.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 134201344 (131056K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00414000 - 0x07ff3fff, 129892352 bytes (31712 pages)
avail memory = 126623744 (123656K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x890
pnpbios: Found PnP BIOS data at 0xc00fc260
pnpbios: Entry = f0000:c290 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03ee000.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0x0605, revid=0x81
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8605, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x22
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x30
bus=0, slot=4, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000b800, size 8, enabled
map[14]: type 1, range 32, base d5800000, size 12, enabled
found-> vendor=0x9004, dev=0x5078, revid=0x03
bus=0, slot=13, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=15, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=15, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b400, size 6, enabled
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=0, slot=16, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=12
powerspec 1 supports D0 D2 D3 current D3
map[10]: type 3, range 32, base d7000000, size 12, enabled
map[14]: type 4, range 32, base 0000b000, size 5, enabled
map[18]: type 1, range 32, base d5000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x02
bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xd6000000-0xd6efffff
pcib1: prefetched decode 0xd7f00000-0xe3ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base d6000000, size 19, enabled
map[14]: type 3, range 32, base d8000000, size 27, enabled
found-> vendor=0x5333, dev=0x8a22, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 12 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xb800-0xb8ff mem 0xd5800000-0xd5800fff irq 11 at device 13.0 on pci0
ahc0: No SEEPROM available.
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
ahc0: Downloading Sequencer Program... 443 instructions downloaded
aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 15.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pccard0: <PC Card bus (classic)> on pcic0
stat is 4c
pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 15.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [pwr save][pci only]
pccard1: <PC Card bus (classic)> on pcic1
stat is c
pci0: <multimedia, audio> at 16.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb000-0xb01f mem 0xd5000000-0xd50fffff,0xd7000000-0xd7000fff irq 11 at device 17.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:a0:c9:42:7a:98
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: Chip Type: 1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
pcic-: pcic0 already exists, using pcic2 instead
pcic-: pcic1 already exists, using pcic3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 114 bytes
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
PNP0401: end config
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: end config
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNPb02f: adding io range 0x200-0x207, size=0x8, align=0
PNPb02f: end config
pnpbios: handle 5 device ID PNPb02f (2fb0d041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: end config
pnpbios: handle 9 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 10 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 11 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x75, size=0x6, align=0
PNP0b00: end config
pnpbios: handle 12 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 13 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
PNP0c04: end config
pnpbios: handle 14 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x90, size=0x11, align=0
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0
PNP0200: end config
pnpbios: handle 15 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 16 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0
PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0
PNP0c02: end config
pnpbios: handle 18 device ID PNP0c02 (020cd041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic2: not probed (disabled)
pcic3: not probed (disabled)
pmtimer0 failed to probe on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x401 0x409 0x401 0x401
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNPb02f> failed to probe at port 0x200-0x207 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
BIOS Geometries:
0:020afe3f 0..522=523 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA2 on VIA chip
Creating DISK ad0
ad0: <SAMSUNG SW0434A (4.3GB)/JB100-11> ATA-3 disk at ata0-master
ad0: 4104MB (8406720 sectors), 8896 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
pccard: card inserted, slot 0
pccard: card inserted, slot 1
pccard: card inserted, slot 0
pccard: card inserted, slot 1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106111230.f5BCUTM60905>