Date: Fri, 3 Feb 2012 20:22:36 +0530 From: "Desai, Kashyap" <Kashyap.Desai@lsi.com> To: Johan Hendriks <joh.hendriks@gmail.com>, "Kenneth D. Merry" <ken@kdm.org> Cc: freebsd-stable <freebsd-stable@freebsd.org> Subject: RE: LSI supported mps(4) driver in stable/9 and stable/8 Message-ID: <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2A@inbmail01.lsi.com> In-Reply-To: <4F2BF270.70303@gmail.com> References: <20120202191105.GA55719@nargothrond.kdm.org> <4F2BF270.70303@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Johan, I have already figure out this issue in our lab. I also have fix for this issue. (Just don't want to create regression, that= is why I have not posted outside) Since you have seen similar issue, It is worth to try my patch. My machine is not getting IP right now. I will send you patch once my machi= ne is in network ? ~ Kashyap > -----Original Message----- > From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd- > stable@freebsd.org] On Behalf Of Johan Hendriks > Sent: Friday, February 03, 2012 8:13 PM > To: Kenneth D. Merry > Cc: freebsd-stable > Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 > > Kenneth D. Merry schreef: > > Hi folks, > > > > The LSI-supported version of the mps(4) driver that supports their 6Gb > SAS > > HBAs as well as WarpDrive controllers, is now in stable/9 and > stable/8. > > > > Please test it out and let me and Kashyap (CCed) know if you run into > > any problems. > > > > In addition to supporting WarpDrive, the driver also supports > Integrated > > RAID. > > > > Thanks to LSI for doing the work on this driver! > > > > Note that the CAM infrastructure changes that went into FreeBSD/head > along > > with this driver have not gone into either stable/9 or stable/8. Only > the > > driver itself has been merged. > > > > The CAM infrastructure changes depend on some other da(4) driver > changes > > that will need to get merged before they can go back. If that merge > > happens, it will probably only be into stable/9. > > > > A couple of notes about issues with this driver: > > > > - Unlike the previous mps(4) driver, it probes sequentially. If you > have > > a lot of drives in your system, it will take a while to probe them > all. > > - You may see warning messages like this: > > > > _mapping_add_new_device: failed to add the device with handle 0x0019 > to persiste > > nt table because there is no free space available > > _mapping_add_new_device: failed to add the device with handle 0x001a > to persiste > > nt table because there is no free space available > > > > - The driver is not endian safe. (It assumes a little endian > machine.) > > This is not new, the previous version of the driver had the same > issue. > > > > The LSI folks know about these issues. The driver has passed their > testing > > process. > > > > Many thanks to LSI for going through the effort to support FreeBSD. > > > > Ken > Hello Ken. > > Just updated our 16 bay server. did a csup today. > did try some commands, it looked like the drives got husseled. > > But after giving the command camcontrol rescan all it does not give back > the prompt. > Also top shows me the following. > 1589 root 1 20 0 16384K 1376K cbwait 3 0:00 0.00% > camcontrol > > # on another console things works > filer01# camcontrol devlist > <ATA WDC WD800JD-60LS 1D07> at scbus0 target 8 lun 0 (pass0,da0) > <ATA WDC WD800JD-60LS 1D07> at scbus0 target 9 lun 0 (pass1,da1) > <ATA WDC WD2500AAJS-6 2E25> at scbus0 target 10 lun 0 (pass2,da2) > <ATA WDC WD2500JS-60M 2E04> at scbus0 target 11 lun 0 (pass3,da3) > <ATA WDC WD2500JS-60M 2E04> at scbus0 target 12 lun 0 (pass4,da4) > <ATA ST3250620NS BJH> at scbus0 target 13 lun 0 (pass5,da5) > <LSI CORP SAS2X28 0717> at scbus0 target 16 lun 0 > (probe16,ses0,pass6) > <ATA Maxtor 6L080M0 1G10> at scbus0 target 17 lun 0 (pass7,da6) > <ATA Maxtor 6L080M0 1G10> at scbus0 target 18 lun 0 (pass8,da7) > <ATA WDC WD800JD-60LS 1D07> at scbus0 target 19 lun 0 (pass9,da8) > <ATA WDC WD800JD-60LU 1D07> at scbus0 target 20 lun 0 > (pass10,da9) > <ATA GB0250EAFJF HPG6> at scbus0 target 21 lun 0 > (pass11,da10) > <ATA ST3250620NS 3BJP> at scbus0 target 22 lun 0 > (pass12,da11) > <ATA ST3250620NS 3BJP> at scbus0 target 23 lun 0 > (pass13,da12) > <ATA ST3250620NS 3BJP> at scbus0 target 24 lun 0 > (pass14,da13) > <ATA ST3250310AS B> at scbus0 target 27 lun 0 > (pass15,da14) > <ATA ST3250620NS 3BJP> at scbus0 target 28 lun 0 > (pass16,da15) > <ST3808110AS 3.AJJ> at scbus1 target 0 lun 0 > (ada0,pass17) > <TSSTcorp CDDVDW SN-208BB SB00> at scbus3 target 0 lun 0 (pass18,cd0) > > The controller is a LSI 9211-8i with IT firmware. > > here is the dmesg > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #0: Fri Feb 3 10:27:18 CET 2012 > root@filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL amd64 > CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x206a7 Family =3D 6 Model =3D 2a > Stepping =3D 7 > > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E > ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=3D0x15bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,S= S > SE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX> > AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=3D0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory =3D 17179869184 (16384 MB) > avail memory =3D 16493441024 (15729 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <SUPERM SMCI--MB> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 2 > cpu2 (AP): APIC ID: 4 > cpu3 (AP): APIC ID: 6 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <SUPERM SMCI--MB> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfb600000-0xfb603fff irq 19 > at device 0.0 on pci1 > mps0: Firmware: 11.00.00.00, Driver: 11.255.03.00-fbsd > mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDis > c> > em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xf020-0xf03f mem > 0xfb800000-0xfb81ffff,0xfb824000-0xfb824fff irq 20 at device 25.0 on > pci0 > em0: Using an MSI interrupt > em0: Ethernet address: 00:25:90:57:20:bd > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb823000-0xfb8233ff irq > 16 at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xd000-0xd01f mem > 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 16 at device 0.0 on pci3 > em1: Using MSIX interrupts with 3 vectors > em1: Ethernet address: 00:25:90:57:20:bc > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb822000-0xfb8223ff irq > 23 at device 29.0 on pci0 > usbus1: EHCI version 1.0 > usbus1: <EHCI (generic) USB 2.0 controller> on ehci1 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > vgapci0: <VGA-compatible display> mem > 0xf9000000-0xf9ffffff,0xfb000000-0xfb003fff,0xfa800000-0xfaffffff irq 23 > at device 3.0 on pci4 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel Cougar Point AHCI SATA controller> port > 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f > mem 0xfb821000-0xfb8217ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > Event timer "HPET4" frequency 14318180 Hz quality 440 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ZFS filesystem version 5 > ZFS storage pool version 28 > Timecounters tick every 1.000 msec > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > da0 at mps0 bus 0 scbus0 target 8 lun 0 > da0: <ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da1 at mps0 bus 0 scbus0 target 9 lun 0 > da1: <ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device > da1: 300.000MB/s transfers > da1: Command Queueing enabled > da1: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da2 at mps0 bus 0 scbus0 target 10 lun 0 > da2: <ATA WDC WD2500AAJS-6 2E25> Fixed Direct Access SCSI-6 device > da2: 300.000MB/s transfers > da2: Command Queueing enabled > da2: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da3 at mps0 bus 0 scbus0 target 11 lun 0 > da3: <ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device > da3: 300.000MB/s transfers > da3: Command Queueing enabled > da3: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da4 at mps0 bus 0 scbus0 target 12 lun 0 > da4: <ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device > da4: 300.000MB/s transfers > da4: Command Queueing enabled > da4: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da5 at mps0 bus 0 scbus0 target 13 lun 0 > da5: <ATA ST3250620NS BJH> Fixed Direct Access SCSI-6 device > da5: 150.000MB/s transfers > da5: Command Queueing enabled > da5: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da8 at mps0 bus 0 scbus0 target 19 lun 0 > da8: <ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device > da8: 300.000MB/s transfers > da8: Command Queueing enabled > da8: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da9 at mps0 bus 0 scbus0 target 20 lun 0 > da9: <ATA WDC WD800JD-60LU 1D07> Fixed Direct Access SCSI-6 device > da9: 300.000MB/s transfers > da9: Command Queueing enabled > da9: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da11 at mps0 bus 0 scbus0 target 22 lun 0 > da11: <ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device > da11: 150.000MB/s transfers > da11: Command Queueing enabled > da11: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da12 at mps0 bus 0 scbus0 target 23 lun 0 > da12: <ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device > da12: 150.000MB/s transfers > da12: Command Queueing enabled > da12: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da13 at mps0 bus 0 scbus0 target 24 lun 0 > da13: <ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device > da13: 150.000MB/s transfers > da13: Command Queueing enabled > da13: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da14 at mps0 bus 0 scbus0 target 27 lun 0 > da14: <ATA ST3250310AS B> Fixed Direct Access SCSI-6 device > da14: 300.000MB/s transfers > da14: Command Queueing enabled > da14: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > da15 at mps0 bus 0 scbus0 target 28 lun 0 > da15: <ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device > da15: 150.000MB/s transfers > da15: Command Queueing enabled > da15: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > ses0 at mps0 bus 0 scbus0 target 16 lun 0 > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device > ses0: 600.000MB/s transfers > ses0: Command Queueing enabled > ses0: SCSI-3 SES Device > ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 > ada0: <ST3808110AS 3.AJJ> ATA-7 SATA 1.x device > ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > cd0 at ahcich2 bus 0 scbus3 target 0 lun 0 > SMP: AP CPU #3 Launched! > cd0: <TSSTcorp CDDVDW SN-208BB SB00> Removable CD-ROM SCSI-0 device > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO > 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > - tray closed > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > da6 at mps0 bus 0 scbus0 target 17 lun 0 > da6: <ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device > da6: 150.000MB/s transfers > da6: Command Queueing enabled > da6: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da7 at mps0 bus 0 scbus0 target 18 lun 0 > da7: <ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device > da7: 150.000MB/s transfers > da7: Command Queueing enabled > da7: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) > da10 at mps0 bus 0 scbus0 target 21 lun 0 > da10: <ATA GB0250EAFJF HPG6> Fixed Direct Access SCSI-6 device > da10: 300.000MB/s transfers > da10: Command Queueing enabled > da10: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) > GEOM: da15s1: geometry does not match label (16h,63s !=3D 255h,63s). > uhub1: 2 ports with 2 removable, self powered > uhub0: 2 ports with 2 removable, self powered > Root mount waiting for: usbus1 usbus0 > ugen0.2: <vendor 0x8087> at usbus0 > uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> > on usbus0 > ugen1.2: <vendor 0x8087> at usbus1 > uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> > on usbus1 > Root mount waiting for: usbus1 usbus0 > uhub3: 6 ports with 6 removable, self powered > uhub2: 6 ports with 6 removable, self powered > ugen0.3: <Winbond Electronics Corp> at usbus0 > ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, > rev 1.10/0.01, addr 3> on usbus0 > ums0: 3 buttons and [Z] coordinates ID=3D0 > ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, > rev 1.10/0.01, addr 3> on usbus0 > kbd2 at ukbd0 > Trying to mount root from ufs:/dev/ada0p2 [rw]... > em0: link state changed to UP > > thanks for your work. > > regards > Johan > > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable- > unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B2FD678A64EAAD45B089B123FDFC3ED729A3414E2A>