Date: Tue, 11 Apr 2006 20:51:31 GMT From: Edwin Cini <edwinc@keyworld.net> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/95636: 5 minute delay at boot when using VT6205 based USB card reader Message-ID: <200604112051.k3BKpVDQ016837@www.freebsd.org> Resent-Message-ID: <200604112100.k3BL0a4e073529@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 95636 >Category: kern >Synopsis: 5 minute delay at boot when using VT6205 based USB card reader >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Apr 11 21:00:35 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Edwin Cini >Release: FreeBSD 6.0-RELEASE (AMD64) >Organization: >Environment: FreeBSD wuwwu.mshome.net 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Mon Feb 6 21:12:58 CET 2006 root@wuwwu.mshome.net:/usr/obj/usr/src/sys/SMP amd64 >Description: When a Mitsumi 7-in-1 internal card reader is installed, the system halts for approximately 5 minutes during boot-up while attempting to detect umass devices. Following boot-up the card reader is not operational. The card reader is based on a VIA VT6205 Rev003 chip, and is known to work properly in other operating systems. A discussion thread, by another person, describing the same problem related to a Mitsumi card reader is to be found on the FreeBSD-CURRENT archives of June 2005 at the following link: http://lists.freebsd.org/pipermail/freebsd-current/2005-June/050928.html No solution to this problem was then proposed. Diagnostic output: ----------------------------------------------- usbdevs -d -v -a2 Controller /dev/usb0: Controller /dev/usb1: Controller /dev/usb2: Controller /dev/usb3: addr 2: high speed, power 100 mA, config 1, USB 2.0 Card Reader(0x6205), VIA Technologies Inc.(0x040d), rev 0.03 umass0 ----------------------------------------------- dmesg (snippet 1 - USB hardware) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdffff000-0xdfffffff irq 18 at device 28.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdffff000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdfffe000-0xdfffefff irq 18 at device 28.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffe000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdfffd000-0xdfffdfff irq 18 at device 28.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffd000 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffc000-0xdfffc0ff irq 23 at device 28.3 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdfffc000 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 3 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered umass0: VIA Technologies Inc. USB 2.0 Card Reader, rev 2.00/0.03, addr 2 umass0:1:0:-1: Attached to scbus1 umass1: vendor 0x04e8 USB DRIVE, rev 2.00/0.50, addr 3 umass1:2:1:-1: Attached to scbus2 ----------------------------------------------- dmesg (snippet 2 - error messages. 5:28 minutes pass between display of first line and last line shown. Each probe7:... line pair appears after approx 1:08 minutes.) (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe7:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe7:umass-sim0:0:0:0): Retrying Command (probe7:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe7:umass-sim0:0:0:0): Retrying Command (probe7:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe7:umass-sim0:0:0:0): Retrying Command (probe7:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe7:umass-sim0:0:0:0): Retrying Command (probe7:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe7:umass-sim0:0:0:0): error 5 (probe7:umass-sim0:0:0:0): Retries Exausted >How-To-Repeat: Problem occurs every time during system boot. To repeat, simply reboot with the card reader connected to the internal USB header. >Fix: No known fixes to date. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604112051.k3BKpVDQ016837>