Date: Wed, 05 Apr 2006 16:01:00 -0400 From: Mike Tancsa <mike@sentex.net> To: Markus Trippelsdorf <markus@trippelsdorf.de>, stable@freebsd.org Subject: Re: smartmontools and latest 6.1 prerelease Message-ID: <6.2.3.4.0.20060405155043.106b7940@64.7.153.2> In-Reply-To: <20060405194618.GA705@bsd.trippelsdorf.de> References: <20060405194618.GA705@bsd.trippelsdorf.de>
next in thread | previous in thread | raw e-mail | index | archive | help
At 03:46 PM 05/04/2006, Markus Trippelsdorf wrote: >smartd stopped working here after I cvsuped to the latest 6.1 pre-release: > >»smartd[4109]: Device: /dev/ad4, not ATA, no IDENTIFY DEVICE Structure« Same here on 2 different chipsets. However, rebuilding smartmontools seems to fix it! [gp-kit1]# smartctl -a /dev/ad0 smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Failed command: : Inappropriate ioctl for device Failed command: : Inappropriate ioctl for device Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. [gp-kit1]# atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 And then rebuilding it, I get [gp-kit1]# smartctl -a /dev/ad0 smartctl version 5.33 [i386-portbld-freebsd6.1] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST340014A Serial Number: 4JV2P2Z7 Firmware Version: 8.54 User Capacity: 40,020,664,320 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Apr 5 15:59:49 2006 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 062 058 006 Pre-fail Always - 57585514 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 442185414 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7397 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 194 Temperature_Celsius 0x0022 033 045 000 Old_age Always - 33 195 Hardware_ECC_Recovered 0x001a 062 058 000 Old_age Always - 57585514 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5073 - # 2 Short offline Completed without error 00% 5049 - # 3 Short offline Completed without error 00% 5026 - # 4 Short offline Completed without error 00% 5002 - # 5 Short offline Completed without error 00% 4980 - # 6 Short offline Completed without error 00% 4979 - # 7 Short offline Completed without error 00% 4955 - # 8 Short offline Completed without error 00% 4931 - # 9 Short offline Completed without error 00% 4908 - #10 Short offline Completed without error 00% 4884 - #11 Short offline Completed without error 00% 4861 - #12 Short offline Completed without error 00% 4837 - #13 Short offline Completed without error 00% 4814 - #14 Short offline Completed without error 00% 4813 - #15 Short offline Completed without error 00% 4790 - #16 Short offline Completed without error 00% 4766 - #17 Short offline Completed without error 00% 4743 - #18 Short offline Completed without error 00% 4719 - #19 Short offline Completed without error 00% 4696 - #20 Short offline Completed without error 00% 4672 - #21 Short offline Completed without error 00% 4649 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20060405155043.106b7940>