Date: Tue, 20 Sep 2005 19:35:06 -0400 From: David Wassman <myfreebsd@cox.net> To: Ariff Abdullah <skywizard@mybsd.org.my> Cc: freebsd-multimedia@freebsd.org Subject: Re: Sound Control Message-ID: <200509201935.06602.myfreebsd@cox.net> In-Reply-To: <20050920144709.0f6c822a.skywizard@MyBSD.org.my> References: <200509192012.58750.myfreebsd@cox.net> <20050920144709.0f6c822a.skywizard@MyBSD.org.my>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 20 September 2005 02:47 am, Ariff Abdullah wrote: > On Mon, 19 Sep 2005 20:12:57 -0400 > > David Wassman <myfreebsd@cox.net> wrote: > > I cannot get any application that I run to control the volume. I get > > sound but am not able to adust the volume level. So far the following > > apps have shown this problem: > > MPlayer > > Xine > > XMMS > > KMix > > Noatun (no sound at all so may be different issue) > > Kaboodle > > > > I am running FreeBSD 5.4/KDE 3.2.4 with a Sound Blaster Live! sound > > card. My sndstat: > > pcm0: <Creative EMU10K1> at io 0xb800 irq 11 kld snd_emu10k1 (4p/2r/4v > > > > channels duplex default) > > so the card is recognized. I have adjusted the virtual channels in > > sysctl.conf and the sndstat shows there are 4v chanels. > > I have both esound and arts. Thought this may be an issue but both are > > > > dependencies of KDE-Multimedia > > > > So far I have tried the following: > > 1) Updating ports and ran portmanager. No effect. > > 2) Changed KControl->Sound System to use the following in all > > combinations: > > Autodetect > > Threaded OSS > > OSS > > Full Duplex > > /dev/dsp0.0 > > /dev/dspW0.0 > > /dev/dsp0.1 > > /dev/dspW0.1 > > No avail. > > 3) Tried OSS drivers instead of FreeBSD native. Could not > > initialize the card. 4) Rebuilt both esound and arts. No effect > > > > I have googled this yet cannot find any post with similar issue > > (except one in which the onboard card was not deactivated. I do not > > have an onboard). > > > > The only other thing I could think of is to update the whole system in > > > > buildworld. Not really excited about this option as everything else is > > > > working great (don't want to mess with it). I use this as my primary > > desktop so I don't want to be down for that long. > > > > Anyone have any ideas or a direction to point me in? > > Show me the output of /usr/sbin/mixer , pciconf -lv (only multimedia / > audio part), dmesg | grep pcm, cat /dev/sndstat. > > > -- > > Ariff Abdullah > MyBSD > > http://www.MyBSD.org.my (IPv6/IPv4) > http://staff.MyBSD.org.my (IPv6/IPv4) > http://tomoyo.MyBSD.org.my (IPv6/IPv4) Ariff, /usr/sbin/mixer output: Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 Mixer speaker is currently set to 100:100 Mixer line is currently set to 100:100 Mixer mic is currently set to 0:0 Mixer cd is currently set to 100:100 Mixer rec is currently set to 16:16 Mixer ogain is currently set to 100:100 Mixer line1 is currently set to 100:100 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 100:100 Recording source: vol Apps can adjust these values but no effect on output. pciconf -lv output: .... emu10kx0@pci2:7:0: class=0x040100 card=0x80641102 chip=0x00021102 rev=0x08 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780' class = multimedia subclass = audio none2@pci2:7:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x08 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10000 Game Port' class = input device .... jupiter# emu10kx0@pci2:7:0: class=0x040100 card=0x80641102 chip=0x00021102 rev=0x08 hdr=0x00 emu10kx0@pci2:7:0:: Too many arguments. vendor = 'Creative Labs' device = 'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780' class = multimedia subclass = audio none2@pci2:7:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x08 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10000 Game Port' class = input device jupiter# vendor = 'Creative Labs' vendor: Command not found. jupiter# device = 'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780' device: Command not found. jupiter# class = multimedia class: Command not found. jupiter# subclass = audio subclass: Command not found. jupiter# none2@pci2:7:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x08 hdr=0x00 none2@pci2:7:1:: Too many arguments. jupiter# vendor = 'Creative Labs' vendor: Command not found. jupiter# device = 'EMU10000 Game Port' device: Command not found. jupiter# class = input device class: Command not found. dmesg | grep pcm output: pcm0: <EMU10Kx PCM Interface> on emu10kx0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> pcm0: <EMU10Kx PCM Interface> on emu10kx0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> cat /dev/sndstat output: FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <EMU10Kx PCM Interface> on emu10kx0 (8p/1r/4v channels duplex default) I am currently using the emu10kx driver over the emu10k1 driver ( someone suggested this as a possible fix) Thanks for your time and effort, David
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509201935.06602.myfreebsd>