Date: Wed, 27 Aug 2003 10:39:42 +0100 From: Matt Dainty <matt@bodgit-n-scarper.com> To: freebsd-current <freebsd-current@freebsd.org> Subject: Panic on 5.1-RELEASE with ahc Message-ID: <20030827093942.GB21056@gelf.bodgit-n-scarper.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
I've just acquired a new Dell PowerEdge 4600 server (2x 2.4GHz Xeons,
2GB, PERC 3/Di, ...) which I've installed FreeBSD 5.1-RELEASE on.
All the hardware seems to be detected okay, and I've rebuilt a kernel
with unnecessary drivers removed and to take advantage of the SMP, and
this seems to be working in my limited testing so far.
The only problem I have, (and this happened with the stock installed
kernel too ISTR) is that on shutting down, I consistently get a panic,
which after rebuilding my kernel with the debugging turned on, I have
slightly more information:
...
Uptime: 1m48s
NMI ISA a0, EISA ff
RAM parity error, likely hardware failure.
Fatal trap 19: non-maskable interrupt trap while in kernel mode
cpuid = 0; lapic.id = 00000000
instruction pointer = 0x8:0xc014cd64
stack pointer = 0x10:0xe11eac78
frame pointer = 0x10:0xe11eac84
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, IOPL = 0
current process = 1 (init)
kernel: type 19 trap, code=0
Stopped at ahc_shutdown+0x24: jmp ahc_shutdown+0x29
db> trace
ahc_shutdown(c3b0bc00,0,c03326cd,175,32) at ahc_shutdown+0x24
boot(0,0,c03326cd,af,e11ead40) at boot+0x6c0
reboot(c3b17720,e11ead10,c0345860,3fb,1) at reboot+0x46
syscall(2f,2f,2f,80a943a,bfbffdf8) at syscall+0x26e
Xint0x80_syscall() at Xint0x80_syscall+0x1d
--- syscall (55, FreeBSD ELF32, reboot), eip = 0x80507ab, esp = 0xbfbffc2c, ebp = 0xbfbffcf8 ---
db>
This also causes the Hardware LCD display on the front to display "E13F5
PCI SYSTEM", which I have to remove all power from the machine to clear,
although the machine appears to still work with this message displayed.
On advice of the message regarding RAM/hardware failure, I've run all of
the Dell diagnostics to check things like the RAM, and they all pass
with no problem.
The machine has a 39160 fitted in one of the PCI-X slots and also has
both an AIC7899 and AIC7890 onboard, the latter of which has a Quantum
SDLT320 tape drive connected. I've tried removing the 39160 and this
makes no difference. If I remove the ahc driver from my config and
rebuild, I no longer get the panic, problem is I'd like to use the tape
drive :-)
I've included the output of "pciconf -v -l" below if that's any use,
otherwise I'm a bit green on debugging FreeBSD so if there is any more
information you want/need, please let me know how to get it.
Cheers
Matt
--
"Accept anything. Then explain it your way."
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x22 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CMIC-HE'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CMIC-HE'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:2: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CMIC-HE'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:3: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CMIC-HE'
class = bridge
subclass = HOST-PCI
fxp0@pci0:4:0: class=0x020000 card=0x01061028 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
ahc0@pci0:6:0: class=0x010000 card=0x01061028 chip=0x001f9005 rev=0x01 hdr=0x00
vendor = 'Adaptec'
device = 'AHA-2940U2/AHA-2940U2W AIC-7890/1 Ultra2 SCSI Controller'
class = mass storage
subclass = SCSI
none0@pci0:14:0: class=0x030000 card=0x01061028 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies'
device = 'Rage XL PCI'
class = display
subclass = VGA
hostb4@pci0:15:0: class=0x060000 card=0x02011166 chip=0x02011166 rev=0x93 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CSB5 PCI to ISA Bridge'
class = bridge
subclass = HOST-PCI
atapci0@pci0:15:1: class=0x010182 card=0x02121166 chip=0x02121166 rev=0x93 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CSB5 PCI EIDE Controller'
class = mass storage
subclass = ATA
ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x05 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'OSB4 OpenHCI Compliant USB Controller'
class = serial bus
subclass = USB
isab0@pci0:15:3: class=0x060100 card=0x02301166 chip=0x02251166 rev=0x00 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CSB5 PCI Bridge'
class = bridge
subclass = PCI-ISA
hostb5@pci0:16:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CIOB30'
class = bridge
subclass = HOST-PCI
hostb6@pci0:16:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CIOB30'
class = bridge
subclass = HOST-PCI
hostb7@pci0:17:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CIOB30'
class = bridge
subclass = HOST-PCI
hostb8@pci0:17:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'CIOB30'
class = bridge
subclass = HOST-PCI
bge0@pci1:6:0: class=0x020000 card=0x01061028 chip=0x164414e4 rev=0x14 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5700 NetXtreme Gigabit Ethernet Controller'
class = network
subclass = ethernet
pcib2@pci1:8:0: class=0x060400 card=0x00000068 chip=0x03098086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '80303 I/O Processor PCI-to-PCI Bridge Unit'
class = bridge
subclass = PCI-PCI
aac0@pci1:8:1: class=0x010400 card=0x01061028 chip=0x000a1028 rev=0x01 hdr=0x00
vendor = 'Dell Computer Corporation'
device = 'PowerEdge 3/Di Expandable RAID Controller'
class = mass storage
subclass = RAID
none1@pci2:6:0: class=0x010000 card=0x00c51028 chip=0x00c59005 rev=0x01 hdr=0x00
vendor = 'Adaptec'
device = 'RAID Subsystem HBA'
class = mass storage
subclass = SCSI
ahc1@pci2:6:1: class=0x010000 card=0x01061028 chip=0x00cf9005 rev=0x01 hdr=0x00
vendor = 'Adaptec'
device = 'AIC-7899 Ultra160 SCSI Host Adapter'
class = mass storage
subclass = SCSI
ahc2@pci3:6:0: class=0x010000 card=0xf6209005 chip=0x00c09005 rev=0x01 hdr=0x00
vendor = 'Adaptec'
device = 'AHA-39160 (AIC-7899A) Ultra160 SCSI Host Adapter'
class = mass storage
subclass = SCSI
ahc3@pci3:6:1: class=0x010000 card=0xf6209005 chip=0x00c09005 rev=0x01 hdr=0x00
vendor = 'Adaptec'
device = 'AHA-39160 (AIC-7899A) Ultra160 SCSI Host Adapter'
class = mass storage
subclass = SCSI
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (NetBSD)
iD8DBQE/THxeKP58eR+X2TMRAoVdAKCED11xLi0S/ufRFPWp2BkcMDu9cACeLnUY
1O/AiDb+y/zX2M8YEornErY=
=CG/B
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030827093942.GB21056>