Date: Wed, 15 Jul 2009 16:23:14 +0300 From: Krassimir Slavchev <krassi@bulinfo.net> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-arm@freebsd.org Subject: Re: ohci not detected on at91rm9200? Message-ID: <4A5DD842.3080007@bulinfo.net> In-Reply-To: <200907151353.21403.hselasky@c2i.net> References: <4A5C3BF5.9030200@bulinfo.net> <200907141721.10364.hselasky@c2i.net> <4A5DC210.5000806@bulinfo.net> <200907151353.21403.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hans Petter Selasky wrote:
>> It is detected but after configuring the interface I cannot send/receive
>> packets.
>>
>> cdce0: <FreeBSD foundation USB Ethernet Adapter, class 2/0, rev
>> 1.10/1.00, addr 2> on uhub4
>> cdce0: faking MAC address
>> cdce0: WARNING: using obsoleted IFF_NEEDSGIANT flag
>> cdce0: Ethernet address: 2a:29:df:24:01:00
>> cdce0: usb error on tx: TIMEOUT
>> cdce0: usb error on rx: IOERROR
>>
>
> You need to "ifconfig up" the interface on both sides before any traffic will
> pass.
Of course they are:
cdce0:
flags=108c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST,NEEDSGIANT>
metric 0 mtu 1500
ether 2a:00:00:00:00:00
inet 192.168.2.121 netmask 0xffffff00 broadcast 192.168.2.255
media: Ethernet 10baseT/UTP
status: active
ate0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 43:00:00:01:ff:00
inet 192.168.2.189 netmask 0xffffff00 broadcast 192.168.2.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)
iD8DBQFKXdhCxJBWvpalMpkRAvX8AJ9qOCXKNwA3pIx/+F7GkmNNbw6MlgCgk+Rx
m7vmhz+1WVYZnpSOLhrO1KU=
=sXH6
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A5DD842.3080007>