Date: Mon, 29 Apr 2002 22:23:10 +0200 From: Mark Rowlands <mark.rowlands@minmail.net> To: Lutz Horn <lutz@lutz-horn.de> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <200204292223.10553.mark.rowlands@minmail.net> In-Reply-To: <20020429194554.GA6406@lutz-horn.de> References: <20020427134911.GA2993@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net> <20020429194554.GA6406@lutz-horn.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 29 April 2002 9:45 pm, Lutz Horn wrote:
> Hi Mark and the others,
>
> thanks for your time and effort but I'm still not there.
>
> * Mark Rowlands <mark.rowlands@minmail.net> [20020429 14:01 +0200]:
> > and see what irqs are being reported as in use
>
> OK, as you guessed irq 3 is in use by sio1. In fact the following irqs
> are in use:
>
> 1 atkbd0
> 3 sio1
> 4 sio0
> 6 fdc0
> 7 ppc0
> 11 pcic0, pcic1, uhci0 (why this?)
> 12 psm0
> 14 ata0
>
> > try the following pccardd.conf assuming irq 3 is not in use by
> > something else.... like sio1: for example.....
> >
> > # pccardd.conf
> >
> > io 0x240-0x360
> >
> > irq 3
> >
> > # Available memory slots
> > memory 0xd4000 96k
> >
> > # Xircom CreditCard Ethernet CE3-10/100
> > card "Xircom" "CreditCard 10/100"
> > config auto "xe" ?
> > insert /etc/pccard_ether $device start
> > remove /etc/pccard_ether $device stop
>
> If I use pccardc to dump information about the card I get a list of irqs
> the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the
> intersection
>
> {i|i is irq not in use} ^ {j|j is irq card likes} = {2, 5, 9, 10, 15}
>
> in the irq line in /etc/pccard.conf. Starting pccardd with this
> configurations still fails :-( With debuglevel set to 4 I get the
> following output from pccardd:
>
> 1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100")
> [CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)]
> [(null)]
> 2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card
> addr 0x0, flags 0x41
> 3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16
> 4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to
> 0x41, Reset time = 50 ms
> 5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240,
> size 0x10 flags 0x7
> 6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem
> 0xd4000, 4096 bytes, irq 11, flags 0
> 7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for
> Xircom(CreditCard 10/100): Device not configured
> 8 Apr 29 21:31:48 pccardd[148]: pccardd started
>
> What puzzles me is that in line 6 the correct device "xe0" and the
> correct io range "0x240-24f" are reported. But the irq is reported as
> "11" which is a) already in use and b) not in the list of irqs in
> /etc/pccard.conf.
>
> Any ideas?
sorry to be picky but did you try with a pccardd.conf containing "only" the
entry for the xircom?
more things to try.... again once again we are in wild shot in dark
territory... (I have a cem-56 which took a while to persuade to work.)
add to /etc/sysctl.conf
machdep.pccard.mem_start=0xd0000
/etc/rc.conf
pccard_mem="0xd0000"
and if that don't work 0xd4000 or 0xd8000
and if that dont work ...... :-(
> Regards
> Lutz
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204292223.10553.mark.rowlands>