Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Feb 2010 21:51:04 +0800
From:      Alastair Hogge <agh@coolrhaug.com>
To:        John Baldwin <jhb@freebsd.org>
Cc:        kochetkov.andrew@gmail.com, Randy Chou <randychou@yahoo.com>, freebsd-hardware@freebsd.org
Subject:   Re: Intel DP45SG motherboard problem (amd64)
Message-ID:  <201002232151.04595.agh@coolrhaug.com>
In-Reply-To: <201002221102.16153.jhb@freebsd.org>
References:  <201002212231.12018.agh@coolrhaug.com> <201002221102.16153.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue February 23 2010 00:02:16 John Baldwin wrote:
> On Sunday 21 February 2010 9:31:11 am Alastair Hogge wrote:
> > > > Hello all.
> > > > I have a problem with Intel LGA775 DP45SG Intel P45/ICH10R
> > > > motherboard on FreeBSD/amd64. Any devices (keyboard, sata, net) don't
> > > > work after kernel loading. It works for i386 (expect for keyboard:
> > > > first pressed key "sticks").
> > > > FreeBSD versions that i tried are: 7.0-RELEASE, 7.2-RELEASE,
> > > > 8.0-CURRENT There was no difference with/without ACPI.
> > > > I connect serial console, boot -v and I'm seeing FreeBSD complaining
> > > > about inability to allocate interrupts for devices, like the log
> > > > below:
> > >
> > > Try 'device mptable'.  Also, do you have an i386 dmesg?
> > >
> > > --
> > > John Baldwin
> >
> > Hello John,
> >
> > In regards to an old email thread:
> > http://lists.freebsd.org/pipermail/freebsd-hardware/2009-
> 
> June/thread.html#5887
> 
> > I've attached the i386 dmesg & "mptable device" from a 9.0-CURRENT
> > -r204168 system which still fails on booting an amd64 CD.
> 
> You need to build a custom amd64 kernel which includes "device mptable" and
> use that.  You may need to set 'hint.acpi.0.disabled=1' as well to force
>  ACPI to be disabled.
OK, I've cross built an amd64 system and installed it on a spare HDD. Once it 
booted I ran "mptable -verbose -dmesg -grope" Here is the output:


===============================================================================

MPTable

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x00096400
 searching CMOS 'top of mem' @ 0x00096000 (600K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000fd4e0

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000fd4e0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x7f
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000fd240
  signature:			'PCMP'
  base table length:		564
  version:			1.4
  checksum:			0xc1
  OEM ID:			'DP45SG'
  Product ID:			'INTEL'
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			59
  local APIC address:		0xfee00000
  extended table length:	104
  extended table checksum:	45

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	
Flags
		 0	 0x14	 BSP, usable	 6	 7	 10	 0xbfebfbff
		 1	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
		 2	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
		 3	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 PCI   
		 3	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 0	 0x20	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		INT	 conforms    conforms	     3	   0	      0	   2
		INT	 conforms    conforms	     3	   1	      0	   1
		INT	 conforms    conforms	     3	   4	      0	   4
		INT	 conforms    conforms	     3	   8	      0	   8
		INT	active-hi       level	     3	   9	      0	   9
		INT	 conforms    conforms	     3	  12	      0	  12
		INT	 conforms    conforms	     3	  13	      0	  13
		INT	 conforms    conforms	     3	  14	      0	  14
		INT	 conforms    conforms	     3	  15	      0	  15
		INT	 conforms    conforms	     0	 6:A	      0	  16
		INT	 conforms    conforms	     0	 6:B	      0	  17
		INT	 conforms    conforms	     0	 6:C	      0	  18
		INT	 conforms    conforms	     0	 6:D	      0	  19
		INT	 conforms    conforms	     0	 1:A	      0	  16
		INT	 conforms    conforms	     0	 1:B	      0	  17
		INT	 conforms    conforms	     0	 1:C	      0	  18
		INT	 conforms    conforms	     0	 1:D	      0	  19
		INT	 conforms    conforms	     0	31:A	      0	  18
		INT	 conforms    conforms	     0	31:B	      0	  19
		INT	 conforms    conforms	     0	31:C	      0	  18
		INT	 conforms    conforms	     0	22:A	      0	  18
		INT	 conforms    conforms	     0	22:B	      0	  19
		INT	 conforms    conforms	     0	27:A	      0	  22
		INT	 conforms    conforms	     2	 0:A	      0	  19
		INT	 conforms    conforms	     2	 2:A	      0	  20
		INT	 conforms    conforms	     2	 2:B	      0	  21
		INT	 conforms    conforms	     2	 2:C	      0	  22
		INT	 conforms    conforms	     2	 2:D	      0	  23
		INT	 conforms    conforms	     2	 3:A	      0	  21
		INT	 conforms    conforms	     2	 3:B	      0	  22
		INT	 conforms    conforms	     2	 3:C	      0	  23
		INT	 conforms    conforms	     2	 3:D	      0	  20
		INT	 conforms    conforms	     2	 4:A	      0	  22
		INT	 conforms    conforms	     2	 4:B	      0	  23
		INT	 conforms    conforms	     2	 4:C	      0	  20
		INT	 conforms    conforms	     2	 4:D	      0	  21
		INT	 conforms    conforms	     0	25:A	      0	  20
		INT	 conforms    conforms	     0	29:A	      0	  23
		INT	 conforms    conforms	     0	29:B	      0	  19
		INT	 conforms    conforms	     0	29:C	      0	  18
		INT	 conforms    conforms	     0	26:A	      0	  16
		INT	 conforms    conforms	     0	26:B	      0	  21
		INT	 conforms    conforms	     0	26:C	      0	  18
		INT	 conforms    conforms	     0	26:D	      0	  16
		INT	 conforms    conforms	     0	28:A	      0	  17
		INT	 conforms    conforms	     0	28:B	      0	  16
		INT	 conforms    conforms	     0	28:C	      0	  18
		INT	 conforms    conforms	     0	28:D	      0	  19
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     0	 0:A	    255	   0
		NMI	 conforms    conforms	     0	 0:A	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0xd000
 address range: 0x2160
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd0000000
 address range: 0x10227000
--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x20000
--
Bus Hierarchy
 bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

-------------------------------------------------------------------------------

dmesg output:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r204168M: Tue Feb 23 06:07:50 WST 2010
    agh@madcat:/usr/obj/amd64/usr/depot/svn.freebsd.org/base/head/sys/GENERIC 
amd64
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz (2399.97-MHz K8-class 
CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4100902912 (3910 MB)
MPTable: <DP45SG INTEL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 
0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xe0020000-0xe002ffff at device 0.1 on 
pci1
em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf100-0xf11f mem 
0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:8c:09:d9
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 
at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 
at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 
at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 
0xe0225c00-0xe0225fff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 
at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 
at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 
at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 
0xe0225800-0xe0225bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: <Lucent FW322/323> mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on 
pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:2b:34:ed
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:2b:34:ed
fwe0: Ethernet address: 02:90:27:2b:34:ed
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x42000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, non CYCLEMASTER 
mode
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xe0101000-0xe01010ff 
irq 20 at device 2.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:d4:2a:bb
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 
0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 
0xe0225000-0xe02257ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206360622
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206360622
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206360622
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est3 attach returned 6
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7: 480Mbps High Speed USB v2.0
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
firewire0: New S400 device ID:00902700022b34b9
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ada0 at ahcich1 bus 0 scbus2 target 0 lun 0
ada0: cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
<SAMSUNG HD501LJ CR100-13> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich4 bus 0 scbus5 target 0 lun 0
ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich5 bus 0 scbus6 target 0 lun 0
ada2: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
ugen0.2: <ALCOR> at usbus0
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus0
ugen1.2: <DATACOMP> at usbus1
ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
Trying to mount root from ufs:/dev/label/direwolf
uhub8: 4 ports with 4 removable, self powered
ugen0.3: <SteelSeries ApS> at usbus0
ums1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> on 
usbus0
ums1: 7 buttons and [XYZ] coordinates ID=2
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 done
All buffers synced.
lock order reversal:
 1st 0xffffff0005155278 ufs (ufs) @ 
/usr/depot/svn.freebsd.org/base/head/sys/kern/vfs_mount.c:1201
 2nd 0xffffff0004f24db8 devfs (devfs) @ 
/usr/depot/svn.freebsd.org/base/head/sys/kern/vfs_subr.c:2091
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xd11
vop_stdlock() at vop_stdlock+0x39
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x7b
devfs_allocv() at devfs_allocv+0x100
devfs_root() at devfs_root+0x48
dounmount() at dounmount+0x474
vfs_unmountall() at vfs_unmountall+0x54
boot() at boot+0x7b4
reboot() at reboot+0x68
syscall() at syscall+0x102
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (55, FreeBSD ELF64, reboot), rip = 0x4082dc, rsp = 0x7fffffffe778, 
rbp = 0x4023d0 ---
Uptime: 7m13s
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r204168M: Tue Feb 23 06:07:50 WST 2010
    agh@madcat:/usr/obj/amd64/usr/depot/svn.freebsd.org/base/head/sys/GENERIC 
amd64
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz (2399.98-MHz K8-class 
CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4100902912 (3910 MB)
MPTable: <DP45SG INTEL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 
0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xe0020000-0xe002ffff at device 0.1 on 
pci1
em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf100-0xf11f mem 
0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:8c:09:d9
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 
at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 
at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 
at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 
0xe0225c00-0xe0225fff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 
at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 
at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 
at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 
0xe0225800-0xe0225bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: <Lucent FW322/323> mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on 
pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:2b:34:ed
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:2b:34:ed
fwe0: Ethernet address: 02:90:27:2b:34:ed
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x42000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER 
mode
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xe0101000-0xe01010ff 
irq 20 at device 2.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:d4:2a:bb
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 
0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 
0xe0225000-0xe02257ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206360622
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206360622
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est3 attach returned 6
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) 
firewire0: bus manager 1 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7: 480Mbps High Speed USB v2.0
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
firewire0: New S400 device ID:00902700022b34b9
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ada0 at ahcich1 bus 0 scbus2 target 0 lun 0
ada0: cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
<SAMSUNG HD501LJ CR100-13> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich4 bus 0 scbus5 target 0 lun 0
ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich5 bus 0 scbus6 target 0 lun 0
ada2: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.2: <ALCOR> at usbus0
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus0
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
ugen1.2: <DATACOMP> at usbus1
ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
Trying to mount root from ufs:/dev/label/direwolf
uhub8: 4 ports with 4 removable, self powered
ugen0.3: <SteelSeries ApS> at usbus0
ums1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> on 
usbus0
ums1: 7 buttons and [XYZ] coordinates ID=2
em0: link state changed to UP

===============================================================================


 





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201002232151.04595.agh>