Date: Thu, 8 Jun 2000 11:21:34 -0400 (EDT) From: Ed DeHart <dehart@pageone.net> To: freebsd-mobile@freebsd.org Subject: Re: WaveLAN almost working with PCI adapter Message-ID: <200006081521.LAA17373@darth.pageone.net>
next in thread | raw e-mail | index | archive | help
I would like to thank everyone for all of the e-mail but I'm still not having much luck. I was using irq 13 for the pccard. It was pointed out that irq 13 is used by npx0. I selected 13 because it was in the pccard.conf file as a possible irq to use. Since nothing I installed used 13 I thought it was free. I should have caught this error. To prevent others from making this mistake, the maintainer of the pccard.conf file should remove 13 from it. Just a suggestion. It was suggested that I remove some of the devices from the system. It was making it hard to find a free irq and devices where sharing irqs which is not very good. I disabled the sio2 and the printer port. I removed the second ehternet card. I built a kernel that only supported the hardware I needed. The good news is the system boots much faster but the WaveLAN card still does not work. The dmesg dump (included) show there are two pccards inserted. Since the PCI adapter only holds one card, this might be a problem. -Ed --------------- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #1: Thu Jun 8 10:50:53 EDT 2000 dehart@orange.prismserver.com:/usr/src/sys/compile/ORANGE Calibrating clock(s) ... TSC clock: 501137740 Hz, i8254 clock: 1193185 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> Data TLB: 128 entries, 2-way associative Instruction TLB: 64 entries, 1-way associative L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative Write Allocate Enable Limit: 128M bytes Write Allocate 15-16M bytes: Enable real memory = 134201344 (131056K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002c5000 - 0x07ff3fff, 131264512 bytes (32047 pages) avail memory = 127660032 (124668K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f9d50 bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x6c0 pnpbios: Found PnP BIOS data at 0xc00fd1d0 pnpbios: Entry = f0000:d200 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f81a0 K6-family MTRR support enabled (2 registers) md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 677273673 bytes/sec bzero() bandwidth = 133582687 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9) pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard found-> vendor=0x10b9, dev=0x1541, revid=0x04 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x10b9, dev=0x5243, revid=0x04 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10b9, dev=0x5237, revid=0x03 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base de000000, size 12 found-> vendor=0x10b9, dev=0x7101, revid=0x00 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x10b9, dev=0x1533, revid=0xc3 class=06-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x10b7, dev=0x9055, revid=0x30 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000d800, size 7 map[14]: type 1, range 32, base dd800000, size 7 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 found-> vendor=0x10b9, dev=0x5229, revid=0xc1 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[20]: type 1, range 32, base 0000d400, size 4 pci0: <PCI bus> on pcib0 pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0 found-> vendor=0x1023, dev=0x9750, revid=0xf3 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base df800000, size 22 map[14]: type 1, range 32, base df000000, size 17 map[18]: type 1, range 32, base de800000, size 22 pci1: <PCI bus> on pcib1 pci1: <Trident model 9750 VGA-compatible display device> (vendor=0x1023, dev=0x9750) at 0.0 irq 11 pci0: <AcerLabs M5237 (Aladdin-V) USB controller> (vendor=0x10b9, dev=0x5237) at 2.0 irq 12 chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdd800000-0xdd80007f irq 10 at device 9.0 on pci0 xl0: Ethernet address: 00:01:02:3d:6e:24 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 5 at device 10.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [pwr save][pci only] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac1c104c 02100003 06070001 00822008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c00105 40: 2023133f 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ef6f: f000ef6f: f000e2c3: f000ef6f: 10: f000ef6f: f000ff54: f00081d8: f000ef6f: ExCa registers: 00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08 10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43 20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77 30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66 pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 5 at device 10.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [pwr save][pci only] PCI Config space: 00: ac1c104c 02100003 06070001 00822008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c00105 40: 2023133f 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ef6f: f000ef6f: f000e2c3: f000ef6f: 10: f000ef6f: f000ff54: f00081d8: f000ef6f: ExCa registers: 00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08 10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43 20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77 30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66 atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd400 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd408 ata1: mask=01 status0=50 status1=ff ata1: mask=01 status0=00 status1=ff ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 11 on isa0 pcic0: management irq 11 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached new masks: bio 4008c040, tty 40030012, net 40070412 bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached ata0-master: success setting up UDMA2 mode on Aladdin chip ad0: <WDC WD102AA/05.05B05> ATA-4 disk at ata0 as master ad0: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: <COMPAQ CDR-8335/0008> CDROM drive at ata1 as master acd0: read 1779KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked Mounting root from ufs:ad0s1a ad0s1: type 0xa5, start 0, end = 20044079, size 20044080 : OK start_init: trying /sbin/init pccard: card inserted, slot 0 pccard: card inserted, slot 1 Linux-ELF exec handler installed pcic: I/O win 0 flags 15 240-27f pcic: I/O win 0 flags 5 240-27f wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 9 slot 0 on pccard0 pcic: I/O win 0 flags 15 240-27f wi0: Ethernet address: 00:60:1d:f7:71:ed bpf: wi0 attached wi0: device timeout wi0: tx buffer allocation failed ---- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006081521.LAA17373>