Date: Fri, 12 Nov 2021 14:22:00 +0100 From: Milan Obuch <freebsd-usb@dino.sk> To: freebsd-usb@freebsd.org Subject: Re: USBDMSC emulated device does not work on FreeBSD Message-ID: <20211112142200.7947d6b2@zeta.dino.sk> In-Reply-To: <571bda62-b86c-a5b0-fcc6-f70102b85db7@selasky.org> References: <20211112095915.226af6be@zeta.dino.sk> <6a6850f5-8233-aae7-8e65-42594402fcb5@selasky.org> <20211112120714.73f195a9@zeta.dino.sk> <972a650d-d490-1965-13a4-2fb984531f1d@selasky.org> <20211112121806.2db2a908@zeta.dino.sk> <85cdc03e-e8f1-871c-6e1d-66181e45dcb1@selasky.org> <20211112123438.6305fc56@zeta.dino.sk> <df6b1571-54a3-91e2-6da5-82df6644bd64@selasky.org> <20211112140045.018ebf0c@zeta.dino.sk> <571bda62-b86c-a5b0-fcc6-f70102b85db7@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 12 Nov 2021 14:13:08 +0100 Hans Petter Selasky <hps@selasky.org> wrote: [ snip ] > It crashes on synchronize cache: > > Try adding this quirk: > > usbconfig -d ugen1.3 add_quirk UQ_MSC_NO_SYNC_CACHE > > Then re-plug the device. > > --HPS > Could this be done before device attach? Trouble is, after synchronize crashes, USB firmware crashes as well. This means there is basically no ugen1.3 device anymore, so doing this command just tells (after some delay) Adding quirk 'UQ_MSC_NO_SYNC_CACHE' failed, continuing. Next I must reset the board, but before I am able to do anything, it crashes again. Regards, Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20211112142200.7947d6b2>