Date: Sat, 31 May 1997 15:57:24 -0400 (EDT) From: "Russell D. Murphy" <rdmurphy@dunquin.bu.edu> To: hardware@FreeBSD.org Subject: Tape drive problems (Archive Anaconda) Message-ID: <199705311957.PAA00744@dunquin.bu.edu>
next in thread | raw e-mail | index | archive | help
I'm trying to backup up my system (so I can upgrade to 2.2.x, among other reasons). However, my tape drive is acting up: it seems to have trouble backing up anything of any size and then seems to render the tape it was using unreadable (and unwritable). Although I haven't backed up since Jan. (which was when I installed 2.1.6) I have used the drive regularly since last summer. I have an NCR controller and an Archive Anaconda QIC-1350 tape drive: (ncr0:6:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2 I generate these problems with dump or tar: # pwd /A/home # tar -cvf /dev/rst0 rdmurphy (long file listing) tar: can't write to /dev/rst0: Input/output error # tar -tvf /dev/rst0 tar: read error on /dev/rst0: Input/output error # cd rdmurphy # tar -cvf /dev/rst0 illeg (shorter file listing, with a tape drive noise at end, no err.) # tar -tvf /dev/rst0 tar: read error on /dev/rst0: Input/output error This produces dmesg messages such as: ncr0: restart (ncr dead ?). sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. sd0(ncr0:0:0): UNIT ATTENTION asc:29,0 sd0(ncr0:0:0): Power on, reset, or bus device reset occurred , retries:4 st0(ncr0:6:0): 200ns (5 Mb/sec) offset 8. I'd be quite grateful for any suggestions that anyone can offer. I'm overdue for a backup as it is and I'm also reluctant to upgrade without a recent backup. Thanks- Russ Murphy more system info.: ------------------ FreeBSD 2.1.6-RELEASE #0: Sat May 31 12:56:47 EDT 1997 rdmurphy@dunquin.bu.edu:/usr/src/sys/compile/DUNQUIN CPU: 133-MHz Pentium 735\90 or 815\100 (Pentium-class CPU) real memory = 16777216 (16384K bytes) avail memory = 15114240 (14760K bytes) ncr0 <ncr 53c810 scsi> rev 2 int a irq 11 on pci0:12 mapreg[10] type=1 addr=0000e400 size=0100. mapreg[14] type=0 addr=f7ff0000 size=0100. reg20: virtual=0xf4105000 physical=0xf7ff0000 size=0x100 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (V2 pl23 95/09/07) ncr0 waiting for scsi devices to settle (ncr0:0:0): "FUJITSU M1606S-512 6234" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1041MB (2131992 512 byte sectors) sd0(ncr0:0:0): with 3457 cyls, 6 heads, and an average 102 sectors/track (ncr0:3:0): "SONY CD-ROM CDU-76S 1.1c" type 5 removable SCSI 2 cd0(ncr0:3:0): CD-ROM cd0(ncr0:3:0): 200ns (5 Mb/sec) offset 8. cd0(ncr0:3:0): UNIT ATTENTION asc:28,0 cd0(ncr0:3:0): Not ready to ready transition, medium may have changed cd present.[400000 x 2048 byte records] (ncr0:6:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2 st0(ncr0:6:0): Sequential-Access st0(ncr0:6:0): 200ns (5 Mb/sec) offset 8. density code 0x0, drive empty
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199705311957.PAA00744>