Date: Tue, 19 Oct 1999 13:08:50 -0700 (PDT) From: Ryan Petty <rbp@source.net> To: freebsd-questions@freebsd.org Subject: Kernel make fails Message-ID: <Pine.BSF.3.96.991019123247.18626A-100000@nexus6.source.net>
next in thread | raw e-mail | index | archive | help
Hello,
I am having trouble compiling a new kernel under FreeBSD-3.3-RELEASE. I
am not new to FreeBSD per se, but am new to configuring and compiling
kernels.
When I attempt to make a new kernel I received the following error code:
loading kernel
ioconf.o(.data+0xd0): undefined reference to `aicdriver'
*** Error code 1
Stop.
I then went back into my kernel config file and commented out all the IDE
and ATAPI controllers and drives (as I do not have any IDE devices
installed). I then received the following error:
cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit
-Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi
-nostdinc -I- -I. -I../.. -I../../../include -DKERNEL -DVM_STACK -include
opt_global.h -elf vers.c
loading kernel
ioconf.o(.data+0x48): undefined reference to `aicdriver'
*** Error code 1
Stop.
I have included a bit of the output of make before the error if it helps
to determine where the error is occurring. I am including my kernel
config file for review.
Thanks in advance for any help you can give me.
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.22 1999/09/14 22:53:30 jkh Exp $
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
#cpu "I586_CPU"
cpu "I686_CPU"
ident "NEXUS6-1"
maxusers 64
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
#options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
#options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options COMPAT_LINUX # 10/19/99 -rbp
options "MAXMEM=(256*1024)" # 10/19/99 -rbp
options IPFIREWALL # 10/19/99 -rbp
options IPDIVERT # 10/19/99 -rbp
options QUOTA # 10/19/99 -rbp
config kernel root on da0
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
controller isa0
controller pnp0 # PnP support for ISA
controller eisa0
controller pci0
# Floppy drives
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
# IDE controller and disks
#options "CMD640" # work around CMD640 chip deficiency
#controller wdc0 at isa? port "IO_WD1" bio irq 14
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
# ATAPI devices
#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device acd0 #IDE CD-ROM
#device wfd0 #IDE Floppy (e.g. LS-120)
# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller ncr0 # NCR/Symbios Logic
#controller ahb0 # EISA AHA1742 family
controller ahc0 # AHA2940 and onboard AIC7xxx devices
#controller amd0 # AMD 53C974 (Teckram DC-390(T))
#controller isp0 # Qlogic family
#controller dpt0 # DPT Smartcache - See LINT for options!
#controller adv0 at isa? port ? cam irq ?
#controller adw0
#controller bt0 at isa? port ? cam irq ?
#controller aha0 at isa? port 0x340 cam irq 9
controller aic0 at isa? port 0x340 bio irq 9 vector aicintr
# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device sa0 # Sequential Access (tape etc)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI)
# Proprietary or custom CD-ROM Interfaces
#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10
#device matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# atkbdc0 controls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at isa? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at isa? disable flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card?
# Serial (COM) ports
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? disable port "IO_COM3" tty irq 5
#device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0 # Parallel port bus (required)
device lpt0 at ppbus? # Printer
device plip0 at ppbus? # TCP/IP over parallel
device ppi0 at ppbus? # Parallel port interface device
#controller vpo0 at ppbus? # Requires scbus and da0
# PCI Ethernet NICs.
#device al0 # ADMtek AL981 (``Comet'')
#device ax0 # ASIX AX88140A
#device de0 # DEC/Intel DC21x4x (``Tulip'')
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
#device mx0 # Macronix 98713/98715/98725 (``PMAC'')
#device pn0 # Lite-On 82c168/82c169 (``PNIC'')
#device rl0 # RealTek 8129/8139
#device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'')
#device tl0 # Texas Instruments ThunderLAN
#device tx0 # SMC 9432TX (83c170 ``EPIC'')
#device vr0 # VIA Rhine, Rhine II
#device vx0 # 3Com 3c590, 3c595 (``Vortex'')
#device wb0 # Winbond W89C840F
#device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
#device ep0 at isa? port 0x300 net irq 10
#device ex0 at isa? port? net irq?
#device fe0 at isa? port 0x300 net irq ?
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 net irq 10 drq 0
#device cs0 at isa? port 0x300 net irq ?
# requires PCCARD (PCMCIA) support to be activated
#device xe0 at isa? port? net irq ?
# PCCARD NIC drivers.
# ze and zp take over the pcic and cannot coexist with generic pccard
# support, nor the ed and ep drivers they replace.
#device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun 1 # Packet tunnel
pseudo-device pty 64 # Pseudo-ttys (telnet etc)
pseudo-device gzip # Exec gzipped a.out's
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
pseudo-device bpfilter 1 #Berkeley packet filter
_______________________
Ryan Petty
SourceNet Corporation
http://www.source.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.991019123247.18626A-100000>