Date: Tue, 31 Dec 2002 17:18:57 -0500 From: Peter Radcliffe <pir@pir.net> To: freebsd-stable@FreeBSD.ORG Subject: Thinkpad X30, modem, suspend, sound, etc (Re: ThinkPad R31 - Lucent windmodem woes....) Message-ID: <20021231221857.GA3325@pir.net> In-Reply-To: <20021126022700.90E2E6E3@CRWdog.demon.co.uk> References: <20021125105914.B240@luthien.ukc.ac.uk> <20021126022700.90E2E6E3@CRWdog.demon.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Andy Sparrow <spadger@best.com> probably said:
> > vendor = 'Intel Corporation'
> > device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
> > class = simple comms
> > fxp0@pci1:8:0: class=0x020000 card=0x10311014 chip=0x10318086 rev=0x42 hdr=0x00
> > vendor = 'Intel Corporation'
> > device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection'
> > class = network
> > subclass = ethernet
> > pcic0@pci1:9:0: class=0x060700 card=0x10171014 chip=0xac50104c rev=0x02 hdr=0x02
>
> Looks to me like you don't have a Lucent Winmodem.
> Seems like Intel (or IBM) substituted an AC'97 modem for you instead. Nice.
> AFAIK, that won't work - certainly not with 'ltmdm'...
My just arrived X30 2672-5DU also has an AC'97 Modem Controller, as
far as I know this means I stick with the pcmcia modem I was using
before ...
Thanks to various older postings here I've got suspend to memory, USB
(after creating /dev/usb[1-2]), pcmcia, compact flash, ether, wireless
(IBM high rate wireless == intersil prism 2.5 and works fine. Thanks
Warner :), audio (although I havn't tracked down exactly what chipset
it is, kldload snd works and it keeps working after a suspend/resume
and sounds really good with headphones), X using the VESA driver, etc,
all work fine.
I'm still working on suspend to disk (I have a utility someone here
pointed at from ibm's web site to play with) and I have no ideas about
dock/undock from the media slice without rebooting. 'atacontrol detach
1' detaches the 2nd IDE controller in the dock but I can't undock or
eject the cdrom drive without it beeping lots and not letting me. Is
this going to work ? Hints ?
ppc complains;
ppc0: cannot reserve I/O port range
Not seen that before.
Overall I'm liking this machine a _lot_.
P.
---------------------------------------------------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE-p1 #2: Tue Dec 31 16:05:24 GMT 2002
pir@disapp:/usr/src/sys/compile/DISAPP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1063.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 796262400 (777600K bytes)
avail memory = 770801664 (752736K bytes)
Preloaded elf kernel "kernel" at 0xc03a0000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fdec0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 3577 VGA-compatible display device> at 2.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci_device_request: not done, ii=0xc16b9620
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci1
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 0.1 on pci1
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci1: <unknown card> (vendor=0x1180, dev=0x0552) at 0.2 irq 11
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci1
wi0: 802.11 address: 00:05:3c:60:43:c9
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary 1.01.00, Station 1.04.09
fxp0: <Intel Pro/100 Ethernet> port 0x7000-0x703f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:09:6b:06:0f:c6
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: cannot reserve I/O port range
---------------------------------------------------------------------
P.
--
pir pir-sig@pir.net pir-sig@net.tufts.edu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021231221857.GA3325>