Date: Tue, 08 Mar 2016 19:23:23 -0500 From: Eric McCorkle <eric@metricspace.net> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros 9462 detected but nonfunctional Message-ID: <3FACAF7E-007B-440B-91AC-6AA60C4A6AE1@metricspace.net> In-Reply-To: <CAJ-Vmo=S351qENbp-uBtgsKCRFE7GOorzgrv0c1tN4OzNsUf=Q@mail.gmail.com> References: <86B2B57E-A595-490E-9A9A-67F14EA5BB90@metricspace.net> <CAJ-Vmo=zVkywvd%2B0zJjzxw6ZVFEXDuCgwEqe1U2OrdzhpVx7sA@mail.gmail.com> <92F6E55B-B086-4589-B37D-F2F85F8390E7@metricspace.net> <CAJ-Vmo=Qg5-8EbSkbsivf7VBhSwe52y4WTHgfS36%2Bi6ADROaFA@mail.gmail.com> <3FBFFC30-0504-4948-A2D3-3AAC3E0FCC7E@metricspace.net> <CAJ-Vmo=0MoVsaYWf0n7FcGaT72YPevYbvfCX_-1n8JSwuD5Rcw@mail.gmail.com> <2466598D-721C-4C05-870A-136A562C581B@metricspace.net> <CAJ-Vmo=S351qENbp-uBtgsKCRFE7GOorzgrv0c1tN4OzNsUf=Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Full dmesg attached.
This is where it gets weird. The scan sees nothing. But you're right; the card sees something. Those registers change over time.
On March 8, 2016 6:44:08 PM EST, Adrian Chadd <adrian.chadd@gmail.com> wrote:
>Ok, do:
>
>wlandebug -i wlan0 +scan
>
>then re-do the scan and see what's listed in dmesg.
>
>I mean, it's seeing /something/.
>
>
>
>-adrian
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
[-- Attachment #2 --]
Table 'FACP' at 0xac72b3f0
Table 'APIC' at 0xac72b500
APIC: Found table at 0xac72b500
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #6 r296356: Tue Mar 8 12:25:52 EST 2016
root@electron:/usr/obj/usr/src/sys/CUSTOM amd64
FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
PPIM 0: PA=0xc0000000, VA=0xffffffff81610000, size=0x7e9000, mode=0x1
VT(efifb): resolution 1920x1080
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff815ab000.
Preloaded /boot/entropy "/boot/entropy" at 0xffffffff815ac428.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff815ac478.
Preloaded elf obj module "/boot/kernel/acl_nfs4.ko" at 0xffffffff815acc60.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff815ad290.
Calibrating TSC clock ... TSC clock: 2194970266 Hz
CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (2194.97-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
Secondary Processor Controls=0x53cff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,XSAVES>
Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
Entry Controls=0xda0400
EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
TSC: P-state invariant, performance statistics
Data TLB: 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000053fff, 278528 bytes (68 pages)
0x0000000000059000 - 0x000000000009efff, 286720 bytes (70 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x00000000015e7000 - 0x00000000a7f25fff, 2794713088 bytes (682303 pages)
0x00000000a8207000 - 0x00000000abc08fff, 60825600 bytes (14850 pages)
0x00000000abc68000 - 0x00000000abfd4fff, 3592192 bytes (877 pages)
0x00000000acfff000 - 0x00000000acffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x0000000432df2fff, 13738389504 bytes (3354099 pages)
avail memory = 16496631808 (15732 MB)
Table 'FACP' at 0xac72b3f0
Table 'APIC' at 0xac72b500
Table 'FPDT' at 0xac72b588
Table 'FIDT' at 0xac72b5d0
Table 'MCFG' at 0xac72b670
Table 'HPET' at 0xac72b6b0
Table 'SSDT' at 0xac72b6e8
Table 'UEFI' at 0xac72ba00
Table 'SSDT' at 0xac72ba48
Table 'ASF!' at 0xac72bfd0
Table 'SSDT' at 0xac72c070
Table 'SSDT' at 0xac72c5b0
Table 'SSDT' at 0xac72d128
Table 'DMAR' at 0xac732ca0
DMAR: Found table at 0xac732ca0
x2APIC available but disabled by DMAR table
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
lapic0: CMCI unmasked
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x059000-0x059fff at 0xfffffe0451c99000
x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
random: read 4096 bytes from preloaded cache
random: unblocking device.
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0x00000000AC71B000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000AC71B090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000AC72B3F0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000AC71B1C0 01022B (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000ACD4DF80 000040
ACPI: APIC 0x00000000AC72B500 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000AC72B588 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000AC72B5D0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000AC72B670 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000AC72B6B0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000AC72B6E8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000AC72BA00 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000AC72BA48 000584 (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 0x00000000AC72BFD0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000AC72C070 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 0x00000000AC72C5B0 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x00000000AC72D128 005B78 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x00000000AC732CA0 0000F8 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: CSRT 0x00000000AC732D98 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: ver 0x20 maxredir 0x27
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT0
lapic0: LINT0 trigger: edge
lapic0: LINT0 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: level
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-39 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00000400 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: entropy device external interface
nfslock: pseudo-device
crypto: <crypto core>
netmap: loaded module
null: <full device, null device, zero device>
module_register_init: MOD_LOAD (vesa, 0xffffffff8097f860, 0) error 19
io: <I/O>
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
random: harvesting attach, 8 bytes (4 bits) from ram0
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
acpi0: <ALASKA A M I > on motherboard
ACPI: 6 ACPI AML tables successfully acquired and loaded
PCIe: Memory Mapped configuration base @ 0xf8000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 7 blocks of module-level executable AML code
acpi0: Power Button (fixed)
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource2
cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005550000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 2
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005556800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005468C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
random: harvesting attach, 8 bytes (4 bits) from cpu1
cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 1
cpu2: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu2
cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu3
ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored
ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored
ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored
ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0), MSI
hpet0: t2: irqs 0x00f00800 (0), MSI
hpet0: t3: irqs 0x00f01000 (0), MSI
hpet0: t4: irqs 0x00000000 (0), MSI
hpet0: t5: irqs 0x00000000 (0), MSI
hpet0: t6: irqs 0x00000000 (0), MSI
hpet0: t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
msi: routing MSI-X IRQ 263 to local APIC 0 vector 56
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
random: harvesting attach, 8 bytes (4 bits) from hpet0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
random: harvesting attach, 8 bytes (4 bits) from atrtc0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
random: harvesting attach, 8 bytes (4 bits) from attimer0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_ec0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link0
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link1
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link2
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link3
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link4
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link5
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link6
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 3 4 5 6 10 11 12 14 15
Validation 0 4 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link7
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0x3e
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xb0000000-0xfeafffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x1604, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1616, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xb1000000, size 24, enabled
pcib0: allocated type 3 (0xb1000000-0xb1ffffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0x4000, size 6, enabled
pcib0: allocated type 4 (0x4000-0x403f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x160c, revid=0x09
domain=0, bus=0, slot=3, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xb2214000, size 14, memory disabled
pcib0: allocated type 3 (0xb2214000-0xb2217fff) for rid 10 of pci0:0:3:0
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x9cb1, revid=0x03
domain=0, bus=0, slot=20, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xb2200000, size 16, enabled
pcib0: allocated type 3 (0xb2200000-0xb220ffff) for rid 10 of pci0:0:20:0
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x9cba, revid=0x03
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xb221c000, size 5, enabled
pcib0: allocated type 3 (0xb221c000-0xb221c01f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x9ca0, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xb2210000, size 14, memory disabled
pcib0: allocated type 3 (0xb2210000-0xb2213fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x9c90, revid=0xe3
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
secbus=1, subbus=1
found-> vendor=0x8086, dev=0x9c94, revid=0xe3
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=2, subbus=2
found-> vendor=0x8086, dev=0x9c96, revid=0xe3
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
secbus=3, subbus=3
found-> vendor=0x8086, dev=0x9ca6, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xb221a000, size 10, enabled
pcib0: allocated type 3 (0xb221a000-0xb221a3ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x9cc3, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x9c83, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x40b0, size 3, enabled
pcib0: allocated type 4 (0x40b0-0x40b7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0x40a0, size 2, enabled
pcib0: allocated type 4 (0x40a0-0x40a3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0x4090, size 3, enabled
pcib0: allocated type 4 (0x4090-0x4097) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0x4080, size 2, enabled
pcib0: allocated type 4 (0x4080-0x4083) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled
pcib0: allocated type 4 (0x4060-0x407f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xb2219000, size 11, enabled
pcib0: allocated type 3 (0xb2219000-0xb22197ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x9ca2, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[10]: type Memory, range 64, base 0xb2218000, size 8, enabled
pcib0: allocated type 3 (0xb2218000-0xb22180ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled
pcib0: allocated type 4 (0x4040-0x405f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
random: harvesting attach, 8 bytes (4 bits) from hostb0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xb1000000-0xb1ffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, head #0
random: harvesting attach, 8 bytes (4 bits) from acpi_video0
vgapci0: Boot video device
random: harvesting attach, 8 bytes (4 bits) from vgapci0
hdac0: <Intel Broadwell HDA Controller> mem 0xb2214000-0xb2217fff irq 16 at device 3.0 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x160c
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
hdac0: using IRQ 264 for MSI
hdac0: Caps: OSS 3, ISS 0, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
random: harvesting attach, 8 bytes (4 bits) from hdac0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xb2200000-0xb220ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
xhci0: using IRQ 265 for MSI
xhci0: MSI enabled
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
xhci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xb2210000-0xb2213fff irq 22 at device 27.0 on pci0
hdac1: PCI card vendor: 0x8086, device: 0x7270
hdac1: HDA Driver Revision: 20120126_0002
hdac1: Config options: on=0x00000000 off=0x00000000
hdac1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 266 to local APIC 0 vector 61
hdac1: using IRQ 266 for MSI
hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
random: harvesting attach, 8 bytes (4 bits) from hdac1
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
random: harvesting attach, 8 bytes (4 bits) from pci1
random: harvesting attach, 8 bytes (4 bits) from pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib2
pcib0: allocated type 3 (0xb2100000-0xb21fffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xd0000000-0xd00fffff) for rid 24 of pcib2
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xb2100000-0xb21fffff
pcib2: prefetched decode 0xd0000000-0xd00fffff
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x07
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x3000, size 8, port disabled
pcib2: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:2:0:0
map[18]: type Memory, range 64, base 0xb2100000, size 12, memory disabled
pcib2: allocated memory range (0xb2100000-0xb2100fff) for rid 18 of pci0:2:0:0
map[20]: type Prefetchable Memory, range 64, base 0xd0000000, size 14, enabled
pcib2: allocated prefetch range (0xd0000000-0xd0003fff) for rid 20 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xb2100000-0xb2100fff,0xd0000000-0xd0003fff irq 18 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 4
re0: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 267 to local APIC 0 vector 62
re0: using IRQ 267 for MSI-X
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 5
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
random: harvesting attach, 8 bytes (4 bits) from rgephy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
re0: Using defaults for TSO: 65518/35/2048
re0: bpf attached
re0: Ethernet address: 00:e0:4c:c1:12:0c
re0: netmap queues/slots: TX 1/256, RX 1/256
random: harvesting attach, 8 bytes (4 bits) from re0
random: harvesting attach, 8 bytes (4 bits) from pci2
random: harvesting attach, 8 bytes (4 bits) from pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 3 (0xb2000000-0xb20fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xb2000000-0xb20fffff
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x168c, dev=0x0034, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0xb2000000, size 19, memory disabled
pcib3: allocated memory range (0xb2000000-0xb207ffff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 19
ath0: <Atheros AR946x/AR948x> mem 0xb2000000-0xb207ffff irq 19 at device 0.0 on pci3
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 63
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ar9300_fill_capability_info: (MCI) MCI support = 1
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ar9300_get_spectral_params: chan is NULL - no ss nf values
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11na MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: 11na MCS 20MHz SGI
ath0: MCS 0-7: 7Mbps - 72Mbps
ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
ath0: 11na MCS 40MHz:
ath0: MCS 0-7: 13.5Mbps - 135Mbps
ath0: MCS 8-15: 27Mbps - 270Mbps
ath0: 11na MCS 40MHz SGI:
ath0: MCS 0-7: 15Mbps - 150Mbps
ath0: MCS 8-15: 30Mbps - 300Mbps
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: 11ng MCS 20MHz SGI
ath0: MCS 0-7: 7Mbps - 72Mbps
ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
ath0: 11ng MCS 40MHz:
ath0: MCS 0-7: 13.5Mbps - 135Mbps
ath0: MCS 8-15: 27Mbps - 270Mbps
ath0: 11ng MCS 40MHz SGI:
ath0: MCS 0-7: 15Mbps - 150Mbps
ath0: MCS 8-15: 30Mbps - 300Mbps
ath0: AR9460 mac 640.3 RF5110 phy 2977.7
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
random: harvesting attach, 8 bytes (4 bits) from ath0
random: harvesting attach, 8 bytes (4 bits) from pci3
random: harvesting attach, 8 bytes (4 bits) from pcib3
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb221a000-0xb221a3ff irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 64
usbus1: EHCI version 1.0
usbus1 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus1
random: harvesting attach, 8 bytes (4 bits) from ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
random: harvesting attach, 8 bytes (4 bits) from isa0
random: harvesting attach, 8 bytes (4 bits) from isab0
ahci0: <AHCI SATA controller> port 0x40b0-0x40b7,0x40a0-0x40a3,0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xb2219000-0xb22197ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 268 to local APIC 0 vector 65
ahci0: using IRQ 268 for MSI
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ ALP AL CLO 6Gbps PMD SSC PSC 32cmd 4ports
ahci0: Caps2: DESO SADM SDS APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich0
ahcich1: not probed (disabled)
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich3
random: harvesting attach, 8 bytes (4 bits) from ahci0
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x4040-0x405f mem 0xb2218000-0xb22180ff irq 18 at device 31.3 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 66
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
random: harvesting attach, 8 bytes (4 bits) from smb0
random: harvesting attach, 8 bytes (4 bits) from smbus0
random: harvesting attach, 8 bytes (4 bits) from ichsmb0
random: harvesting attach, 8 bytes (4 bits) from pci0
random: harvesting attach, 8 bytes (4 bits) from pcib0
acpi_acad0: <AC Adapter> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_acad0
acpi_lid0: <Control Method Lid Switch> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_lid0
acpi_button0: <Power Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button0
acpi_button1: <Sleep Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button1
acpi_tz0: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz0
acpi_tz1: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz1
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 67
atkbd0: [GIANT-LOCKED]
random: harvesting attach, 8 bytes (4 bits) from atkbd0
psm0: unable to allocate IRQ
random: harvesting attach, 8 bytes (4 bits) from atkbdc0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data ffffffff 01 00
psm: status 00 11 57
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 68
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
random: harvesting attach, 8 bytes (4 bits) from psm0
random: harvesting attach, 8 bytes (4 bits) from psmcpnp0
random: harvesting attach, 8 bytes (4 bits) from atdma0
battery0: <ACPI Control Method Battery> on acpi0
random: harvesting attach, 8 bytes (4 bits) from battery0
ACPI: Enabled 5 GPEs in block 00 to 7F
random: harvesting attach, 8 bytes (4 bits) from acpi0
random: harvesting attach, 8 bytes (4 bits) from apic0
acpi0: wakeup code va 0xfffffe0465ead000 pa 0x50000
random: harvesting attach, 8 bytes (4 bits) from nexus0
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0 failed to probe on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
random: harvesting attach, 8 bytes (4 bits) from acpi_perf2
random: harvesting attach, 8 bytes (4 bits) from acpi_perf3
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=105
random: harvesting attach, 8 bytes (4 bits) from coretemp0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
random: harvesting attach, 8 bytes (4 bits) from cpufreq0
random: harvesting attach, 8 bytes (4 bits) from est0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=105
random: harvesting attach, 8 bytes (4 bits) from coretemp1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
random: harvesting attach, 8 bytes (4 bits) from cpufreq1
random: harvesting attach, 8 bytes (4 bits) from est1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=105
random: harvesting attach, 8 bytes (4 bits) from coretemp2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
random: harvesting attach, 8 bytes (4 bits) from cpufreq2
random: harvesting attach, 8 bytes (4 bits) from est2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=105
random: harvesting attach, 8 bytes (4 bits) from coretemp3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
random: harvesting attach, 8 bytes (4 bits) from cpufreq3
random: harvesting attach, 8 bytes (4 bits) from est3
Device configuration finished.
procfs registered
linprocfs registered
linsysfs registered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lapic: Divisor 2, Frequency 49885690 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
IPsec: Initialized Security Association Processing.
lo0: bpf attached
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x80860101
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 1 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=3 seq=0
hdaa0: Tracing association 0 (1)
hdaa0: Pin 3 traced to DAC 2
hdaa0: Association 0 (1) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Tracing input monitor
hdaa0: Tracing other input monitors
hdaa0: Tracing beeper
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000005 AC3 PCM
pcm0: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: nid=3 [pin: Digital-out (Jack)]
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0:
pcm0: Master Volume (OSS: vol): 0/0dB
pcm0: +- ctl 1 (nid 3 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm): 0/0dB
pcm0: +- ctl 1 (nid 3 in ): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Soft PCM mixer ENABLED
pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
random: harvesting attach, 8 bytes (4 bits) from pcm0
random: harvesting attach, 8 bytes (4 bits) from hdaa0
random: harvesting attach, 8 bytes (4 bits) from hdacc0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
hdaa1: Subsystem ID: 0x19910269
hdaa1: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa1: GPIO0: disabled
hdaa1: GPIO1: disabled
hdaa1: Original pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 18 40000000 0 0 Line-out None Unknown 0x00 Unknown 0
hdaa1: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1
hdaa1: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 24 04a11020 2 0 Mic Jack 1/8 Right Black 0
hdaa1: 25 90a70130 3 0 Mic Fixed Analog Internal Unknown 1
hdaa1: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 29 40569d05 0 5 Digital-out None Digital 0x00 Pink 13
hdaa1: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 33 0421101f 1 15 Headphones Jack 1/8 Right Black 0
hdaa1: Patching widget caps nid=29 0x00400000 -> 0x00700000
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 18 40000000 0 0 Line-out None Unknown 0x00 Unknown 0 DISA
hdaa1: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1
hdaa1: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa1: 24 04a11020 2 0 Mic Jack 1/8 Right Black 0
hdaa1: 25 90a70130 3 0 Mic Fixed Analog Internal Unknown 1
hdaa1: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa1: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa1: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa1: 33 0421101f 1 15 Headphones Jack 1/8 Right Black 0
hdaa1: 3 associations found:
hdaa1: Association 0 (1) out:
hdaa1: Pin nid=20 seq=0
hdaa1: Pin nid=33 seq=15
hdaa1: Association 1 (2) in:
hdaa1: Pin nid=24 seq=0
hdaa1: Association 2 (3) in:
hdaa1: Pin nid=25 seq=0
hdaa1: Tracing association 0 (1)
hdaa1: Pin 20 traced to DAC 2
hdaa1: Pin 33 traced to DAC 2 and hpredir 0
hdaa1: Association 0 (1) trace succeeded
hdaa1: Tracing association 1 (2)
hdaa1: Pin 24 traced to ADC 8
hdaa1: Association 1 (2) trace succeeded
hdaa1: Tracing association 2 (3)
hdaa1: Pin 25 traced to ADC 9
hdaa1: Association 2 (3) trace succeeded
hdaa1: Looking for additional DAC for association 0 (1)
hdaa1: Looking for additional ADC for association 1 (2)
hdaa1: Looking for additional ADC for association 2 (3)
hdaa1: Tracing input monitor
hdaa1: Tracing nid 11 to out
hdaa1: nid 11 is input monitor
hdaa1: Tracing nid 35 to out
hdaa1: Tracing other input monitors
hdaa1: Tracing nid 24 to out
hdaa1: Tracing nid 25 to out
hdaa1: Tracing beeper
hdaa1: Headphones redirection for association 0 nid=33 using unsolicited responses.
hdaa1: Redirect output to: main
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 24 on hdaa1
pcm1: Playback:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: DAC: 2
pcm1:
pcm1: nid=20 [pin: Speaker (Fixed)]
pcm1: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm1: + <- nid=2 [audio output] [src: pcm]
pcm1: + <- nid=11 [audio mixer] [src: mix]
pcm1:
pcm1: nid=33 [pin: Headphones (Black Jack)]
pcm1: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm1: + <- nid=2 [audio output] [src: pcm]
pcm1: + <- nid=11 [audio mixer] [src: mix]
pcm1:
pcm1: Record:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: ADC: 8
pcm1:
pcm1: nid=8 [audio input]
pcm1: + <- nid=35 [audio mixer] [src: speaker, mic, mix]
pcm1: + <- nid=24 [pin: Mic (Black Jack)] [src: mic]
pcm1: + <- nid=29 [beep widget] [src: speaker]
pcm1: + <- nid=11 [audio mixer] [src: mix]
pcm1:
pcm1: Input Mix:
pcm1:
pcm1: nid=11 [audio mixer]
pcm1: + <- nid=24 [pin: Mic (Black Jack)] [src: mic]
pcm1: + <- nid=29 [beep widget] [src: speaker]
pcm1:
pcm1: Master Volume (OSS: vol): -65/0dB
pcm1: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm1: +- ctl 10 (nid 12 in 0): mute
pcm1: +- ctl 11 (nid 12 in 1): mute
pcm1: +- ctl 17 (nid 20 in ): mute
pcm1: +- ctl 26 (nid 33 in ): mute
pcm1:
pcm1: PCM Volume (OSS: pcm): -65/0dB
pcm1: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm1: +- ctl 10 (nid 12 in 0): mute
pcm1:
pcm1: Microphone Volume (OSS: mic): 0/36dB
pcm1: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm1: +- ctl 20 (nid 24 out): 0/36dB (4 steps)
pcm1: +- ctl 27 (nid 35 in 0): mute
pcm1:
pcm1: Speaker/Beep Volume (OSS: speaker): -16/12dB
pcm1: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm1: +- ctl 31 (nid 35 in 4): mute
pcm1:
pcm1: Recording Level (OSS: rec): -16/30dB
pcm1: +- ctl 3 (nid 8 in 0): -16/30dB (32 steps) + mute
pcm1: +- ctl 27 (nid 35 in 0): mute
pcm1: +- ctl 31 (nid 35 in 4): mute
pcm1: +- ctl 32 (nid 35 in 5): mute
pcm1:
pcm1: Input Mix Level (OSS: mix): -34/12dB
pcm1: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm1: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm1: +- ctl 11 (nid 12 in 1): mute
pcm1: +- ctl 32 (nid 35 in 5): mute
pcm1:
pcm1: Input Monitoring Level (OSS: igain): 0/0dB
pcm1: +- ctl 11 (nid 12 in 1): mute
pcm1:
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "speaker":
pcm1: Mixer "mic":
pcm1: Mixer "mix":
pcm1: Mixer "rec":
pcm1: Mixer "igain":
pcm1: Mixer "ogain":
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (unknown)
pcm1: Recording channel set is: Front Left, Front Right,
pcm1: Recording channel matrix is: 2.0 (disconnected)
random: harvesting attach, 8 bytes (4 bits) from pcm1
pcm2: <Realtek ALC269 (Internal Analog Mic)> at nid 25 on hdaa1
pcm2: Record:
pcm2: Stream cap: 0x00000001 PCM
pcm2: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm2: ADC: 9
pcm2:
pcm2: nid=9 [audio input]
pcm2: + <- nid=34 [audio selector] [src: speaker, monitor]
pcm2: + <- nid=25 [pin: Mic (Fixed)] [src: monitor]
pcm2: + <- nid=29 [beep widget] [src: speaker]
pcm2:
pcm2: Microphone2 Volume (OSS: monitor): 0/36dB
pcm2: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute
pcm2: +- ctl 21 (nid 25 out): 0/36dB (4 steps)
pcm2:
pcm2: Speaker/Beep Volume (OSS: speaker)
pcm2: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute
pcm2:
pcm2: Recording Level (OSS: rec): -16/30dB
pcm2: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute
pcm2: +- ctl 21 (nid 25 out): 0/36dB (4 steps)
pcm2:
pcm2: Mixer "rec":
pcm2: Mixer "monitor":
pcm2: Automatically set rec source to: monitor
pcm2: Recording channel set is: Front Left, Front Right,
pcm2: Recording channel matrix is: 2.0 (unknown)
random: harvesting attach, 8 bytes (4 bits) from pcm2
random: harvesting attach, 8 bytes (4 bits) from hdaa1
random: harvesting attach, 8 bytes (4 bits) from hdacc1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000133
ahcich0: AHCI reset: device found
ahcich0: AHCI reset: device ready after 0ms
ahcich3: AHCI reset...
ahcich3: SATA connect time=100us status=00000133
acpi_tz0: switched from NONE to _AC0: 72.0C
ahcich3: AHCI reset: device found
ahcich3: AHCI reset: device ready after 0ms
acpi_acad0: acline initialization start
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
GEOM: new disk ada0
ada0: <TOSHIBA MQ02ABF100 DS001A> ATA8-ACS SATA 3.x device
ada0: Serial Number 653XC1OTT
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 850 EVO M.2 250GB EMT21B6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S24BNXAH109195V
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors)
battery0: battery initialization start
ada1: quirks=0x1<4K>
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <TOSHIBA MQ02ABF100 DS001A> ATA8-ACS SATA 3.x device
pass0: Serial Number 653XC1OTT
pass0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
pass0: Command Queueing enabled
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
pass1 at ahcich3 bus 0 scbus1 target 0 lun 0
pass1: <Samsung SSD 850 EVO M.2 250GB EMT21B6Q> ACS-2 ATA SATA 3.x device
pass1: Serial Number S24BNXAH109195V
pass1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass1: Command Queueing enabled
lapic1: Forcing LINT1 to edge trigger
lapic2: CMCI unmasked
lapic3: CMCI unmasked
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000100f2
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 2 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 51
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48
msi: Assigning MSI IRQ 264 to local APIC 2 vector 52
msi: Assigning MSI IRQ 266 to local APIC 2 vector 53
msi: Assigning MSI IRQ 268 to local APIC 2 vector 54
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1097485133 Hz quality 1000
Trying to mount root from zfs:data []...
battery0: battery initialization done, tried 1 times
GEOM: new disk ada1
Root mount waiting for: usbus1 usbus0
uhub0: 15 ports with 15 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
uhub1: 2 ports with 2 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub1
ugen0.2: <vendor 0x04ca> at usbus0
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub2
ugen0.3: <vendor 0x058f> at usbus0
start_init: trying /sbin/init
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: Blowfish-CBC 256
GEOM_ELI: Crypto: software
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 30:10:b3:77:be:cd
re0: link state changed to DOWN
acpi_tz0: switched from _AC0 to _AC2: 50.0C
re0: link state changed to UP
acpi_tz0: switched from _AC2 to _AC3: 48.0C
ubt0: <vendor 0x04ca product 0x300d, class 224/1, rev 1.10/0.01, addr 1> on usbus0
random: harvesting attach, 8 bytes (4 bits) from ubt0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
acpi_tz0: switched from _AC3 to _AC2: 50.0C
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
acpi_tz0: switched from _AC2 to _AC3: 47.0C
ugen0.2: <vendor 0x04ca> at usbus0 (disconnected)
ubt0: at uhub0, port 4, addr 1 (disconnected)
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 52a -> 56a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 56a -> 60a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 60a -> 64a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 64a -> 36a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 36a -> 40a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 40a -> 44a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 44a -> 48a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 48a -> 2g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 2g -> 3g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 4g -> 5g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 5g -> 8g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 8g -> 9g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 9g -> 10g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 10g -> 12g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 12g -> 149a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 149a -> 153a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 153a -> 157a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 157a -> 161a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 161a -> 165a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 165a -> 100a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 100a -> 104a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 104a -> 108a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 108a -> 112a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 112a -> 116a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 116a -> 120a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 120a -> 124a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 124a -> 128a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 128a -> 132a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 132a -> 136a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 136a -> 140a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=1
wlan0: scan_end: out
wlan0: sta_pick_bss: no scan candidate
wlan0: scan_end: done, [ticks 2148207774, dwell min 20 scanend 715194]
wlan0: notify scan done
wlan0: ieee80211_scanreq: flags 0x20052 duration 0x7fffffff mindwell 0 maxdwell 0 nssid 1
wlan0: ieee80211_check_scan: active scan, append, nojoin, once
wlan0: sta_pick_bss: no scan candidate
wlan0: ieee80211_swscan_start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, append, nojoin, wlan0: scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 149a, 153a, 157a, 161a, 165a, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 200ms
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 140a -> 1g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 1g -> 6g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 6g -> 11g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 11g -> 7g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 7g -> 13g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 13g -> 52a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 52a -> 56a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 56a -> 60a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 60a -> 64a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 64a -> 36a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 36a -> 40a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 40a -> 44a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 44a -> 48a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 48a -> 2g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 2g -> 3g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 4g -> 5g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 5g -> 8g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 8g -> 9g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 9g -> 10g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 10g -> 12g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 12g -> 149a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 149a -> 153a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 153a -> 157a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 157a -> 161a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 161a -> 165a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 165a -> 100a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 100a -> 104a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 104a -> 108a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 108a -> 112a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 112a -> 116a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 116a -> 120a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 120a -> 124a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 124a -> 128a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 128a -> 132a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 132a -> 136a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 136a -> 140a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=1
wlan0: scan_end: out
wlan0: sta_pick_bss: no scan candidate
wlan0: scan_end: done, [ticks 2148221905, dwell min 20 scanend 729304]
wlan0: notify scan done
wlan0: ieee80211_scanreq: flags 0x20052 duration 0x7fffffff mindwell 0 maxdwell 0 nssid 1
wlan0: ieee80211_check_scan: active scan, append, nojoin, once
wlan0: sta_pick_bss: no scan candidate
wlan0: ieee80211_swscan_start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, append, nojoin, wlan0: scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 149a, 153a, 157a, 161a, 165a, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 200ms
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 140a -> 1g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 1g -> 6g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 6g -> 11g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 11g -> 7g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 7g -> 13g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 13g -> 52a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 52a -> 56a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 56a -> 60a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 60a -> 64a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 64a -> 36a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 36a -> 40a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 40a -> 44a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 44a -> 48a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 48a -> 2g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 2g -> 3g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 4g -> 5g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 5g -> 8g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 8g -> 9g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 9g -> 10g [active, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 10g -> 12g [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 12g -> 149a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 149a -> 153a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 153a -> 157a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 157a -> 161a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 161a -> 165a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 165a -> 100a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 100a -> 104a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 104a -> 108a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 108a -> 112a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 112a -> 116a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 116a -> 120a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 120a -> 124a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 124a -> 128a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 128a -> 132a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 132a -> 136a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 136a -> 140a [passive, dwell min 20ms max 200ms]
wlan0: scan_curchan: calling; maxdwell=200
wlan0: scan_curchan_task: waiting
wlan0: scan_curchan_task: loop start; scandone=1
wlan0: scan_end: out
wlan0: sta_pick_bss: no scan candidate
wlan0: scan_end: done, [ticks 2148235919, dwell min 20 scanend 743293]
wlan0: notify scan done
wlan0: ieee80211_scanreq: flags 0x20052 duration 0x7fffffff mindwell 0 maxdwell 0 nssid 1
wlan0: ieee80211_check_scan: active scan, append, nojoin, once
wlan0: sta_pick_bss: no scan candidate
wlan0: ieee80211_swscan_start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, append, nojoin, wlan0: scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 149a, 153a, 157a, 161a, 165a, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 200ms
wlan0: scan_curchan_task: loop start; scandone=0
wlan0: scan_curchan_task: chan 140a -> 1g [active, dwell min 20ms max 200ms]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FACAF7E-007B-440B-91AC-6AA60C4A6AE1>