Date: Sat, 4 Oct 2003 11:11:32 +1000 From: Damon Permezel <zeph@damon.com> To: John Polstra <jdp@polstra.com> Cc: Paul Saab <ps@mu.org> Subject: Re: 4.9-RC and bge Message-ID: <B140FE7F-F607-11D7-BF58-000A957C9058@damon.com> In-Reply-To: <XFMail.20031003090122.jdp@polstra.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday, Oct 4, 2003, at 02:01 Australia/Brisbane, John Polstra
wrote:
> Could you please send us the full dmesg output from your machine?
> I'm interested in which PHYs are attached to your bge devices.
>
Sure.
> You are seeing these messages only for bge0, and not for bge1 --
> right?
Correct, although I have nothing connected to bge1, so that tells us
nothing.
It is the obvious thing to try, but it seems I am too lazy to walk over
there and plug a cable in.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.9-RC #12: Fri Oct 3 10:16:43 EST 2003
root@zige.damon.com:/usr/local/obj/usr/src/sys/FUBAR
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1984149164 Hz
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1984.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 536805376 (524224K bytes)
avail memory = 517910528 (505772K bytes)
Preloaded elf kernel "kernel" at 0xc044f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fc140
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem
0xfe000000-0xfe0ffff
f,0xfe204000-0xfe204fff irq 11 at device 4.0 on pci0
fxp0: Ethernet address 00:06:5b:88:18:bc
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem
0xfe203000
-0xfe203fff irq 10 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem
0xfe202000-0xfe20
2fff irq 11 at device 8.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <ATI Mach64-GR graphics accelerator> at 14.0
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x8b0-0x8bf,0x8d8-0x8db,0x8d0
-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on
pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem
0xfcf00000-0xfcf
0ffff irq 10 at device 6.0 on pci1
bge0: Ethernet address: 00:06:5b:88:18:bd
miibus1: <MII bus> on bge0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
pcib7: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on
pci1
pci2: <PCI bus> on pcib7
pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 11
pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 10
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 11 at device 8.1
on pci1
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.7-0, Build 3153, S/N b821d3
aac0: Supported
Options=55c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,SGMAP64>
pcib2: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib8: <PCI to PCI bridge (vendor=1044 device=a500)> at device 6.0 on
pci3
pci4: <PCI bus> on pcib8
asr0: <Adaptec Caching SCSI RAID> mem 0xec000000-0xedffffff irq 11 at
device 6.1
on pci3
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xbc00-0xbcff mem
0xeff00000-0xef
f00fff irq 10 at device 8.0 on pci3
pcib3: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
pcib5: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib5
pcib6: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib6
pcib9: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci9: <PCI bus> on pcib9
pci9: <unknown card> (vendor=0x8086, dev=0x1008) at 6.0 irq 11
pcib14: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci14: <PCI bus> on pcib14
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
0xead00000-0xead0
ffff irq 10 at device 6.0 on pci14
bge1: Ethernet address: 00:10:18:02:2c:d8
miibus2: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff,0xd
4000-0xd47ff,0xec000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IPsec: Initialized Security Association Processing.
ata0-slave: ATAPI identify retries exceeded
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata0-master PIO4
aacd0: <RAID 5> on aac0
aacd0: 32768MB (67108992 sectors)
aacd1: <RAID 5> on aac0
aacd1: 32768MB (67108992 sectors)
aacd2: <RAID 5> on aac0
aacd2: 38601MB (79056000 sectors)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3
device
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Mounting root from ufs:/dev/aacd0s1a
bge0: gigabit link up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B140FE7F-F607-11D7-BF58-000A957C9058>