Date: Wed, 16 Sep 1998 19:18:15 +0200 (CEST) From: Stephane Legrand <Stephane.Legrand@wanadoo.fr> To: current@FreeBSD.ORG Subject: CAM - fatal error, failed to attach to device Message-ID: <199809161718.TAA00432@sequoia.mondomaineamoi.megalo>
next in thread | raw e-mail | index | archive | help
I have the following error with CAM : ... changing root device to da0s1a cam_debug: xpt_schedule_dev cam_debug: Inserting onto queue cam_debug: xpt_run_dev_sendq cam_debug: running device 0xf092dd00 cam_debug: xpt_schedule_dev cam_debug: Inserting onto queue cam_debug: xpt_run_dev_sendq cam_debug: running device 0xf092dd00 da0: fatal error, failed to attach to device (da0:ncr0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ncr0:0:6:0): error code 67 cam_debug: xpt_release_ccb The boot stops but i can use CTRL+ALT+DEL to reboot. My config is the following : ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 12 on pci0.11.0 scbus0 at ncr0 bus 0 sd0 at scbus0 target 6 lun 0 sd0: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2 sd0: Direct-Access sd0: 20.0 MB/s (50 ns, offset 15) 3067MB (6281856 512 byte sectors) ncr1: <ncr 53c810a fast10 scsi> rev 0x12 int a irq 11 on pci0.12.0 scbus1 at ncr1 bus 0 st0 at scbus1 target 0 lun 0 st0: <SONY SDT-7000 0195> type 1 removable SCSI 2 st0: Sequential-Access st0: 10.0 MB/s (100 ns, offset 8) density code 0x13, drive empty cd0 at scbus1 target 4 lun 0 cd0: <PIONEER CD-ROM DR-U03S 1.01> type 5 removable SCSI 2 cd0: CD-ROM cd0: asynchronous. can't get the size -- Stephane.Legrand@wanadoo.fr | systeme d'exploitation FreeBSD http://perso.wanadoo.fr/stephane.legrand/ | http://www.freebsd.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809161718.TAA00432>