Date: Wed, 28 Jun 2017 20:52:17 -0700 From: Mark Millard <markmi@dsl-only.net> To: Emmanuel Vadot <manu@freebsd.org> Cc: freebsd-arm <freebsd-arm@freebsd.org>, FreeBSD Toolchain <freebsd-toolchain@freebsd.org>, FreeBSD Ports <freebsd-ports@freebsd.org> Subject: Re: /usr/ports -r444615 (e.g.) & head -r320458 (e.g.): sysutils/u-boot-pine64 build fails for arch/arm/dts/pine64_plus.dtb source handling error (gic in a64.dtsi) Message-ID: <51D64AB6-5E0A-4210-B3B1-CB236F1C9B39@dsl-only.net> In-Reply-To: <746945FA-AFCD-40FE-AF7E-875B89EC1B4A@dsl-only.net> References: <746945FA-AFCD-40FE-AF7E-875B89EC1B4A@dsl-only.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2017-Jun-28, at 7:44 PM, Mark Millard <markmi@dsl-only.net> wrote:
> Is the below a BSDL vs. GPL DTS issue?
>=20
> In my attempt to build sysutils/u-boot-pine64 I got:
>=20
> OBJCOPY u-boot.srec
> OBJCOPY u-boot-nodtb.bin
> start=3D$(aarch64-none-elf-nm u-boot | grep __rel_dyn_start | cut -f 1 =
-d ' '); end=3D$(aarch64-none-elf-nm u-boot | grep __rel_dyn_end | cut =
-f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x4a000000 $start =
$end
> SYM u-boot.sym
> DTC arch/arm/dts/pine64_plus.dtb
> Error at arch/arm/dts/.pine64_plus.dtb.dts.tmp:533:27: Expected unit =
address
> gic: interrupt-controller@{
> ^
> Error at arch/arm/dts/.pine64_plus.dtb.dts.tmp:533:27: Failed to find =
root node /.
> gic: interrupt-controller@{
> ^
> Failed to parse tree.
> gmake[3]: *** [scripts/Makefile.lib:299: arch/arm/dts/pine64_plus.dtb] =
Error 1
> gmake[2]: *** [dts/Makefile:36: arch-dtbs] Error 2
> gmake[1]: *** [Makefile:821: dts/dt.dtb] Error 2
> gmake[1]: *** Waiting for unfinished jobs....
> gmake[1]: Leaving directory =
'/usr/obj/portswork/usr/ports/sysutils/u-boot-pine64/work/u-boot-2016.05'
>=20
>=20
>=20
> Looking at the gic part of the source. . .
>=20
> # more =
/usr/obj/portswork/usr/ports/sysutils/u-boot-pine64/work/u-boot-2016.05/ar=
ch/arm/dts/a64.dtsi
> . . .
> gic: interrupt-controller@{
> compatible =3D "arm,gic-400";
> interrupt-controller;
> #interrupt-cells =3D <3>;
> #address-cells =3D <0>;
>=20
> reg =3D <0x01C81000 0x1000>,
> <0x01C82000 0x2000>,
> <0x01C84000 0x2000>,
> <0x01C86000 0x2000>;
> interrupts =3D <GIC_PPI 9
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>=20
>=20
>=20
> I'll be trying 3 other u-boot-*'s so I may have more to
> report later.
The other 3 that I tried worked fine:
Installation of sysutils/u-boot-rpi2 (u-boot-rpi2-2015.04)
Installation of sysutils/u-boot-rpi3 (u-boot-rpi3-2017.01)
Installation of sysutils/u-boot-sinovoip-bpi-m3 =
(u-boot-sinovoip-bpi-m3-2016.05)
So this may be unique to a64.dtsi and its lack of
hexadecimal digits after the "@" in what I quoted.
Still, sysutils/u-boot-pine64 used to build. So it may
be a BSDL vs. GPL DTS issue as far as the handling of
the notation goes.
=3D=3D=3D
Mark Millard
markmi at dsl-only.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51D64AB6-5E0A-4210-B3B1-CB236F1C9B39>