Date: Fri, 11 Oct 2002 21:00:58 -0700 From: Kristopher Zentner <kzentner@section6.net> To: stable@freebsd.org Subject: 10/11/2002 FreeBSD 4.7-stable kernel panic Message-ID: <36A92DC0-DD97-11D6-97D0-000393D5EADE@section6.net>
next in thread | raw e-mail | index | archive | help
Greetings all. Usually I have very few problems with FreeBSD, in fact this is my first in years so it could be a pretty bad bug, or something changed and I haven't found it yet. I upgraded to 4.7-stable today 10/11/2002. Made world, mergemastered, made and installed the kernel, rebooted and I got the kernel panic at the bottom of this mail. Here's some proc and memory stats: CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x584 Stepping = 4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 134217728 (131072K bytes) avail memory = 126668800 (123700K bytes) I can post the rest of the dmesg if needed (though I know some people get turned off at seeing an entire dmesg and this mail is long enough). For now I'll include the problem part (which I only was able to get after copying as it kept rebooting). The thing is that my old 4.6-stable kernel *works*, so I doubt this is a hardware problem on my end. This kernel, even when compiled with the GENERIC config produces the same results. I really hope this is fixable, I love my FreeBSD. Btw, please reply to kzentner@u.washington.edu since I just unsubbed from -stable about a week ago (doh!). Any help is much appreciated. If any additional info (more dmesg, mb make, etc) is needed I will happily provide it. -Kris --Begin Kernel Panic message eiso0: (EISA Bus) Fatal trap 12: page fault while in kernel mode fault virtual address: = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0xc07350e0c stack pointer = 0x10:0xc0553f1c frame pointer = 0x10:0xc0553f24 code segment = base 0x0 limit 0xffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam trap number = 12 panic: page fault To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36A92DC0-DD97-11D6-97D0-000393D5EADE>