Date: Sun, 18 May 2008 22:10:04 GMT From: Michael Powell <nightrecon@gmail.com> To: freebsd-bugs@FreeBSD.org Subject: Re: bin/122925: sftp(1) duplicates filename when get listing directory on CDROM Message-ID: <200805182210.m4IMA4WS010986@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR bin/122925; it has been noted by GNATS.
From: Michael Powell <nightrecon@gmail.com>
To: bug-followup@freebsd.org,
stast@bsdportal.ru
Cc:
Subject: Re: bin/122925: sftp(1) duplicates filename when get listing directory on CDROM
Date: Sun, 18 May 2008 17:45:11 -0400
I have seen this since doing a fresh install of FreeBSD 7 Release on my
pf/gateway server. I only use sftp to occasionally copy something. My other
server machine (web development box) has Samba on it for sharing and does not
show this behavior. Only reading the cdrom via sftp does this. Since my
hardware is likely different from the OP, it may not be hardware related.
server# uname -a
FreeBSD server.test.zip 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Tue Apr 1
22:10:31 EDT 2008
testuser@server.test.zip:/usr/obj/usr/src/sys/kernel_altq i386
dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Tue Apr 1 22:10:31 EDT 2008
testuser@server.test.zip:/usr/obj/usr/src/sys/kernel_altq
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (666.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (127 MB)
avail memory = 125841408 (120 MB)
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82820 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xf5000000-0xf5ffffff,0xf4800000-0xf4803fff,0xf4000000-0xf47fffff irq 11 at
device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x4000-0x40ff mem
0xf4a04000-0xf4a07fff at device 9.0 on pci2
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:1b:11:c3:1f:92
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
skc0: [ITHREAD]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x4400-0x447f mem
0xf4a01000-0xf4a0107f irq 10 at device 13.0 on pci2
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:50:04:d3:17:e3
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
Timecounter "TSC" frequency 666539794 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 9536MB <Maxtor 5T010H1 TAH71DP0> at ata0-master UDMA66
ad1: 14669MB <WDC WD153BA 16.13M16> at ata0-slave UDMA66
acd0: CDROM <ATAPI 48X CDROM/VER-3.30> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
kernel config:
#
# kernel_altq FreeBSD 7 RC1 test-1
cpu I686_CPU
ident SERVER
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
#options SCHED_4BSD # 4BSD scheduler
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
#options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
#options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
#options UFS_GJOURNAL # Enable gjournal-based UFS journaling
#options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
#options GEOM_PART_GPT # GUID Partition Tables.
#options GEOM_LABEL # Provides labelization
#options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
#options COMPAT_FREEBSD4 # Compatible with FreeBSD4
#options COMPAT_FREEBSD5 # Compatible with FreeBSD5
#options COMPAT_FREEBSD6 # Compatible with FreeBSD6
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
#options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
#options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options ADAPTIVE_GIANT # Giant mutex is adaptive.
#options STOP_NMI # Stop CPUS using NMI instead of IPI
#options AUDIT # Security event auditing
nooption KSE
device pf
device pflog
options ALTQ
options ALTQ_PRIQ
# Bus support.
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
#device kbdmux # keyboard multiplexer
device vga # VGA video card driver
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device xl # 3Com 3c905c
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
#device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805182210.m4IMA4WS010986>