Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Oct 2008 00:56:01 +0000 (UTC)
From:      Pyun YongHyeon <yongari@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-6@freebsd.org
Subject:   svn commit: r184191 - in stable/6/sys: . dev/mii
Message-ID:  <200810230056.m9N0u1uJ043269@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: yongari
Date: Thu Oct 23 00:56:01 2008
New Revision: 184191
URL: http://svn.freebsd.org/changeset/base/184191

Log:
  MFC r183966:
    Some 88E1149 PHY's page select is initialized to point to other
    bank instead of copper/fiber bank which in turn resulted in
    wrong registers were accessed during PHY operation. It is
    believed that page 0 should be used for copper PHY so reinitialize
    E1000_EADR to select default copper PHY.
    This fixes link establishment issue of nfe(4) on Sun Fire X4140.
  
    OpenBSD also has similimar patch but they just reset the E1000_EADR
    register to page 0. However some Marvell PHYs((88E3082, 88E1000)
    don't have the extended address register and the meaning of the
    register is quite different for each PHY model. So selecting copper
    PHY is limited to 88E1149 PHY which seems to be the only one that
    exhibits link establishment problem. If parent device know the type
    of PHY(either copper or fiber) that information should be notified
    to PHY driver but there is no good way to pass this information yet.
  
    Reported by:	thompsa
    Reviewed by:	thompsa
    Approved by:	re (gnn)

Modified:
  stable/6/sys/   (props changed)
  stable/6/sys/dev/mii/e1000phy.c

Modified: stable/6/sys/dev/mii/e1000phy.c
==============================================================================
--- stable/6/sys/dev/mii/e1000phy.c	Thu Oct 23 00:54:07 2008	(r184190)
+++ stable/6/sys/dev/mii/e1000phy.c	Thu Oct 23 00:56:01 2008	(r184191)
@@ -153,6 +153,20 @@ e1000phy_attach(device_t dev)
 		if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)
 			sc->mii_flags |= MIIF_HAVEFIBER;
 		break;
+	case MII_MODEL_MARVELL_E1149:
+		/*
+		 * Some 88E1149 PHY's page select is initialized to
+		 * point to other bank instead of copper/fiber bank
+		 * which in turn resulted in wrong registers were
+		 * accessed during PHY operation. It is believed that
+		 * page 0 should be used for copper PHY so reinitialize
+		 * E1000_EADR to select default copper PHY. If parent
+		 * device know the type of PHY(either copper or fiber),
+		 * that information should be used to select default
+		 * type of PHY.
+		 */
+		PHY_WRITE(sc, E1000_EADR, 0);
+		break;
 	case MII_MODEL_MARVELL_E3082:
 		/* 88E3082 10/100 Fast Ethernet PHY. */
 		sc->mii_anegticks = MII_ANEGTICKS;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810230056.m9N0u1uJ043269>