Date: Tue, 3 May 2005 22:35:49 +0000 From: Vittorio <v.demartino2@virgilio.it> To: freebsd-questions@freebsd.org Subject: Problems with user ppp Message-ID: <200505032235.49979.v.demartino2@virgilio.it>
index | next in thread | raw e-mail
On my PC with the latest freebsd 5.4 I'm trying to connect to my ISP "alice" by means of user ppp. Here is my /etc/ppp/ppp.conf: # default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) set device /dev/cuaa0 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set timeout 180 # 3 minute idle timer (the default) alice: # # edit the next three lines and replace the items in caps with # the values which have been assigned by your ISP. # set phone "7020803380" set authname "pippolino@tin.it" set authkey "nonteladico" set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR # Add a (sticky) default route enable dns # request DNS info (for resolv.conf) AND in /etc/ppp/options lock noauth Launching "ppp -background alice" I can connect with my ISP but ..... names are not resolved because PPP doesn't get the DNSs provided by the peer and uses the first DNS server in in /etc/resolv.conf ,10.255.201.22, of a previous dhcp connection at office. Here it is an extract of the connection log: ................................................................................. ppp[505]: tun0: Phase: deflink: his = CHAP 0x05, mine = none ppp[505]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from apx-rm5) ppp[505]: tun0: Phase: Chap Output: RESPONSE (pippolino@tin.it) ppp[505]: tun0: Phase: Chap Input: SUCCESS ppp[505]: tun0: IPCP: Using trigger address 0.0.0.0 ppp[505]: tun0: CCP: FSM: Using "deflink" as a transport ppp[505]: tun0: CCP: deflink: State change Initial --> Closed ppp[505]: tun0: CCP: deflink: LayerStart. ppp[505]: tun0: CCP: MPPE: Not usable without CHAP81 ppp[505]: tun0: CCP: deflink: SendConfigReq(1) state = Closed ppp[505]: tun0: CCP: DEFLATE[4] win 15 ppp[505]: tun0: CCP: PRED1[2] ppp[505]: tun0: CCP: deflink: State change Closed --> Req-Sent ppp[505]: tun0: Phase: deflink: lcp -> open ppp[505]: tun0: Phase: bundle: Network ppp[505]: tun0: IPCP: FSM: Using "deflink" as a transport ppp[505]: tun0: IPCP: deflink: State change Initial --> Closed ppp[505]: tun0: IPCP: deflink: LayerStart. ppp[505]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed ppp[505]: tun0: IPCP: IPADDR[6] 0.0.0.0 ppp[505]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[505]: tun0: IPCP: PRIDNS[6] 10.155.201.22 ^^^^^^^^^^^^^ ppp[505]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[505]: tun0: IPCP: deflink: State change Closed --> Req-Sent ppp[505]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent ppp[505]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[505]: tun0: IPCP: IPADDR[6] 80.21.255.5 ppp[505]: tun0: IPCP: deflink: SendConfigAck(1) state = Req-Sent ppp[505]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[505]: tun0: IPCP: IPADDR[6] 80.21.255.5 ppp[505]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent ppp[505]: tun0: LCP: deflink: RecvProtocolRej(3) state = Opened ppp[505]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) ppp[505]: tun0: CCP: deflink: State change Req-Sent --> Stopped ppp[505]: tun0: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent ppp[505]: tun0: IPCP: IPADDR[6] 212.216.149.154 ppp[505]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 212.216.149.154 ppp[505]: tun0: IPCP: PRIDNS[6] 10.155.201.22 ^^^^^^^^^^^^^^ ppp[505]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[505]: tun0: IPCP: Primary nameserver set to 10.155.201.22 ppp[505]: tun0: IPCP: deflink: SendConfigReq(2) state = Ack-Sent ppp[505]: tun0: IPCP: IPADDR[6] 212.216.149.154 ppp[505]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[505]: tun0: IPCP: PRIDNS[6] 10.155.201.22 ppp[505]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[505]: tun0: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent ................................................................................... What should I do? Vittoriohelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200505032235.49979.v.demartino2>