Date: Fri, 03 Oct 2008 09:49:13 +0200 From: "Alexander Leidinger" <Alexander@Leidinger.net> To: "Alexander Motin" <mav@FreeBSD.org> Cc: freebsd-current@FreeBSD.org, Joel Dahl <joel@FreeBSD.org> Subject: Re: regression in HDA functionality Message-ID: <20081003094913.18626ml1ym0aaqgw@webmail.leidinger.net> In-Reply-To: <48E54B75.3010307@FreeBSD.org> References: <1222892584.00020319.1222880402@10.7.7.3> <48E47ADF.7030004@FreeBSD.org> <20081002144243.3f2e7310@ernst.jennejohn.org> <48E4CC6C.6050407@FreeBSD.org> <20081002194411.387b7f32@ernst.jennejohn.org> <48E526A6.8000107@FreeBSD.org> <48E54290.5010600@FreeBSD.org> <48E54B75.3010307@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting "Alexander Motin" <mav@FreeBSD.org> (from Fri, 03 Oct 2008 =20 01:30:13 +0300): > In this specific case man has actually TWO sound cards in system: =20 > one with HDMI output and another with set of connectors on =20 > motherboard. Driver itself worked perfectly! It is not a driver =20 > problem that video card's codec was detected first by PCI bus while =20 > it's HDMI output is not connected! > > If you think that driver should have some additional logic in =20 > handling of such cases - describe it please. I don't see why driver =20 > should not use digital outputs or how independent soundcards should =20 > be ordered (actually it is not driver's business to enumerate =20 > soundcards). Can you change the order of pcm devices from one soundcard? I =20 understand that you can not change the PCI probe order, but maybe the =20 order of pcm1-3 if pcm1-3 are on the same hardware. If this is possible, it may be better to have the pcm device first =20 which is most likely used. Bye, Alexander. --=20 =09Why are you doing this to me? =09Because knowledge is torture, and there must be awareness before there is change. =09=09-- Jim Starlin, "Captain Marvel", #29 http://www.Leidinger.net Alexander @ Leidinger.net: PGP ID =3D B0063FE7 http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID =3D 72077137
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081003094913.18626ml1ym0aaqgw>