Date: Tue, 3 Jun 2003 09:39:42 -0400 From: Guy Middleton <guy@obstruction.com> To: questions@freebsd.org, current@freebsd.org Subject: Re: can't boot from 4.8-RELEASE distribution CD (and 5.1-BETA2) Message-ID: <20030603093942.A6962@chaos.obstruction.com> In-Reply-To: <20030530232027.A464@chaos.obstruction.com>; from guy on Fri, May 30, 2003 at 11:20:27PM -0400 References: <20030530212325.A2810@chaos.obstruction.com> <20030530232027.A464@chaos.obstruction.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I found the problem; it only occurs if I try to boot with my Palm cradle attached to COM1. Remove it, and everything works fine. On Fri, May 30, 2003 at 11:20:27PM -0400, Guy Middleton wrote: > I'm posting a follup to -current, since I get a similar but different problem > with the 5.1-BETA2 CD. > > With 5.1-BETA2, the boot gets a far as the "Probing devices, please wait" > message, then hangs. The last debug output on the console is: > > > DEBUG: Loading module if_sf.ko (Adaptec AIC-6915 PCI ethernet card) > module_register: module pci/sf already exists! > Module pci/sf failed to register: 17 > module_register: module sf/miibus already exists! > Module sf/miibus failed to register: 17 > > > > On Fri, May 30, 2003 at 09:23:25PM -0400, Guy Middleton wrote: > > I have a FreeBSD 4.1 system, which I am trying to upgrade to 4.8-RELEASE. > > > > Unfortunately, it can't boot from the 4.8 distribution CD. When the > > generic kernel boots, it hangs indefinitely after finding plip0. > > > > I have also tried the 4.3 and 4.7 CDs, the same thing happens with them. > > So something changed betweek 4.1 and 4.3 (I don't have a 4.2 CD to try). > > Anybody have any ideas? > > > > Here is dmesg output, on the system as booted with 4.1-RELEASE: > > > > > > Copyright (c) 1992-2000 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000 > > jkh@ref4.freebsd.org:/usr/src/sys/compile/GENERIC > > Timecounter "i8254" frequency 1193182 Hz > > CPU: Pentium III/Pentium III Xeon/Celeron (451.03-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x672 Stepping = 2 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> > > real memory = 134205440 (131060K bytes) > > avail memory = 126386176 (123424K bytes) > > Preloaded elf kernel "kernel" at 0xc040d000. > > Pentium Pro MTRR support enabled > > md0: Malloc disk > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > > pci0: <PCI bus> on pcib0 > > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > > pci1: <PCI bus> on pcib1 > > pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 11 > > isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f at device 4.2 on pci0 > > uhci0: Invalid irq 255 > > uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS > > device_probe_and_attach: uhci0 attach returned 6 > > chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 > > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xb000-0xb0ff mem 0xdd800000-0xdd800fff irq 9 at device 6.0 on pci0 > > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa81f mem 0xdd000000-0xdd0fffff,0xe1000000-0xe1000fff irq 5 at device 7.0 on pci0 > > fxp0: Ethernet address 00:e0:18:98:3b:2f > > pci0: <unknown card> (vendor=0x1274, dev=0x5000) at 10.0 irq 5 > > dc0: <82c169 PNIC 10/100BaseTX> port 0xa000-0xa0ff mem 0xdc800000-0xdc8000ff irq 10 at device 11.0 on pci0 > > dc0: Ethernet address: 00:a0:cc:3b:f9:c4 > > miibus0: <MII bus> on dc0 > > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model MouseMan+, device ID 0 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/9 bytes threshold > > ppi0: <Parallel I/O> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > plip0: <PLIP network interface> on ppbus0 > > acd0: CDROM <ASUS CD-S500/A> at ata0-master using PIO4 > > afd0: 239MB <IOMEGA ZIP 250 ATAPI> [239/64/32] at ata1-master using PIO3 > > Waiting 15 seconds for SCSI devices to settle > > Mounting root from ufs:/dev/da0s2a > > cd0 at ahc0 bus 0 target 3 lun 0 > > cd0: <YAMAHA CRW4416S 1.0f> Removable CD-ROM SCSI-2 device > > cd0: 8.333MB/s transfers (8.333MHz, offset 31) > > cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed > > da1 at ahc0 bus 0 target 5 lun 0 > > da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device > > da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled > > da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) > > da0 at ahc0 bus 0 target 4 lun 0 > > da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device > > da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled > > da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030603093942.A6962>