Date: Sun, 4 Jun 2006 17:15:28 -0300 From: AT Matik <asstec@matik.com.br> To: freebsd-bugs@freebsd.org Cc: Mark Linimon <linimon@freebsd.org>, William.Anderle@alice.it Subject: Re: kern/98162: [feature request] AcerHK driver port needed for enabling WiFi on Acer's laptops Message-ID: <200606041715.29158.asstec@matik.com.br> In-Reply-To: <200606031900.k53J0xJ9057426@freefall.freebsd.org> References: <200606031900.k53J0xJ9057426@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday 03 June 2006 16:00, Mark Linimon wrote: > Old Synopsis: AcerHK driver port needed for enabling WiFi on Acer's laptops > New Synopsis: [feature request] AcerHK driver port needed for enabling WiFi > on Acer's laptops > > State-Changed-From-To: open->suspended > State-Changed-By: linimon > State-Changed-When: Sat Jun 3 18:59:13 UTC 2006 > State-Changed-Why: > Mark this as a feature request and suspend it awaiting a patch from an > interested party. > > To submitter: have you tried running the Windows drivers under the > NDISulator? > Hi I am not so sure if this problem is well expressed. I reported this before but the PR did not found so much attention. Anyway, what William said is not exactly correct. May be this helps: There is no software enabling of the WL card or the driver. Acer NBs do have a button which en|disable the internal antena *and* switch the buttom LED on or off. This LED is blinking when not associated to an AP and stays lid when connected (carrier indication) The Acer Broadcom WL Driver works very good with NDIS. Now. Until 6.0-Beta5 the LED on the button still worked fine. Soon the ndis driver was kldloaded the LED blinked and was ON when had carrier. Since then the LED is dead but the hardware is fully functional and the antena still can be en|disabled by pressing the WL-Button on the frontside. Like I understand the Linux AcerHK project they like to load|unload the driver by pressing the button what BTW on my Fedora 4 and 5 does also still do not work. But this is an aditional feature what windows also do not do, the button simply en|disables the antena by default. To get the LED on|off|blinking is a very nice feature to see if the driver is loaded or has carrier. Since 6.1-Pre another "bad" issue came up, that when the NB crashes then the antena do not get enabled by default (even by kldload/unload the driver) and need some fiddeling with the WL-button and ifconfig up|down to get it up to work again. On my NB (aspire 3000) I can check the key codes with 214 WLbutton off 213 WLbutton on which I can associate with `ifconfig ndis0 up|down` in order to disconnect or reconnect. I believe the bluetooth interface is not working at all under FreeBSD and Linux but I didn't tried it. Joćo A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606041715.29158.asstec>