Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Feb 2002 08:02:31 -0800 (PST)
From:      Vinod <geekvinod@yahoo.com>
To:        freebsd-mobile@freebsd.org
Subject:   Re: try something else?
Message-ID:  <20020224160231.8367.qmail@web21105.mail.yahoo.com>
In-Reply-To: <20020221.170310.112196624.imp@village.org>

next in thread | previous in thread | raw e-mail | index | archive | help
I am attaching my pccard.conf and dmesg below.its
still giving watchdog timeouts.its orinoco gold card
as a pci card with adapter on a
desktop(freebsd4.4).Hope i get some help.would really
appreciate it.
Vinod
-----------------------------------------------------
Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
        config  0x1 "wi" 5
#       config  auto "wi" ?
        insert  /etc/pccard_ether $device start
        remove  /etc/pccard_ether $device stop
-------------------------------------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 
1994
	The Regents of the University of California. All
rights reserved.
FreeBSD 4.4-RELEASE #0: Wed Feb 20 14:03:58 EST 2002
    root@coit2.uncc.edu:/usr/src/sys/compile/NEWKERN
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 60432384 (59016K bytes)
Preloaded elf kernel "kernel" at 0xc04cd000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge>
at device 1.0 on 
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port
0xfcd0-0xfcdf at device 
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0xfce0-0xfcff irq 
9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller>
port 0x7000-0x700f 
at device 7.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator> at 13.0
tx0: <SMC EtherPower II 10/100> port 0xf400-0xf4ff mem

0xfedfe000-0xfedfefff irq 11 at device 14.0 on pci0
miibus0: <MII bus> on tx0
qsphy0: <QS6612 10/100 media interface> on miibus0
qsphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
tx0: address 00:e0:29:11:6d:85, type SMC9432TX
pcm0: <AudioPCI ES1371-A> port 0xfc40-0xfc7f irq 10 at
device 15.0 on 
pci0
pci_cfgintr_search: linked (63) to configured irq 10
at 0:15:0
pci_cfgintr: 0:16 INTA routed to irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at
device 16.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel
isa irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xe8000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on 
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on 
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master
UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata1-master
using PIO3
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10
slot 0 on pccard0
wi0: Ethernet address: 00:02:2d:3c:66:c2

------------------------------------------------------

--- "M. Warner Losh" <imp@village.org> wrote:
> In message:
> <20020221234549.76891.qmail@web21109.mail.yahoo.com>
>             Vinod <geekvinod@yahoo.com> writes:
> : what can i do with my card now .it didnt work when
> i
> : was using pci routing.was still giving watchdog
> : timeout.
> 
> dmesg is needed for me to help.
> 
> Warner


__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020224160231.8367.qmail>