Date: Mon, 16 Nov 2015 11:36:21 -0800 From: Kevin Oberman <rkoberman@gmail.com> To: Borja Marcos <borjam@sarenet.es> Cc: Gary Palmer <gpalmer@freebsd.org>, freebsd-scsi@freebsd.org, Royce Williams <royce@tycho.org>, freebsd-stable <freebsd-stable@freebsd.org>, Kai Gallasch <k@free.de> Subject: Re: LSI SAS2008 mps driver preferred firmware version Message-ID: <CAN6yY1sH0PnnF_AGwDsA75i_Z6ptOr4J0c_Gqrt%2BRFO6eZsW-Q@mail.gmail.com> In-Reply-To: <7710CBCC-E68F-4454-9E29-E50ED1C6B511@sarenet.es> References: <5644FF09.9090200@free.de> <CA%2BE3k93QrUFA3BvhoswkVDXh2bR2aLYG6Z0TOrisVvNL=%2BMZVA@mail.gmail.com> <56472686.5030301@free.de> <20151114143104.GA41119@in-addr.com> <7710CBCC-E68F-4454-9E29-E50ED1C6B511@sarenet.es>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 16, 2015 at 1:00 AM, Borja Marcos <borjam@sarenet.es> wrote: > > On Nov 14, 2015, at 3:31 PM, Gary Palmer wrote: > > > You can do thinks in /boot/loader.conf to hard code bus and drive > > assignments. > > > > e.g. > > > > hint.da.0.at="scbus0" > > hint.da.0.target="19" > > hint.da.0.unit="0" > > hint.da.1.at="scbus0" > > hint.da.1.target="18" > > hint.da.1.unit="0" > > Beware, the target number assignment is not predictable. There's no > guarantee especially if you replace > a disk. > > > > > > Borja. > As already mentioned, unless you are using zfs, use gpart to label you file systems/disks. Then use the /dev/gpt/LABEL as the mount device in fstab. -- Kevin Oberman, Part time kid herder and retired Network Engineer E-mail: rkoberman@gmail.com PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN6yY1sH0PnnF_AGwDsA75i_Z6ptOr4J0c_Gqrt%2BRFO6eZsW-Q>