Date: Fri, 5 May 2006 11:04:39 -0400 (EDT) From: David Coder <dacoder@dcoder.net> To: Marc Fonvieille <blackend@freebsd.org>, Vivek Khera <vivek@khera.org>, Helge Oldach <helge.oldach@atosorigin.com> Cc: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: usb to serial Message-ID: <20060505105403.V33194@ns0.dcoder.net> In-Reply-To: <200605031402.QAA17412@galaxy.hbg.de.ao-srv.com> References: <200605031402.QAA17412@galaxy.hbg.de.ao-srv.com>
next in thread | previous in thread | raw e-mail | index | archive | help
thx for the suggestions, guys. with device uftdi device uplcom in the kernel config the adapter shows up as ugen0: ArkMicroChips USB-UART Controller, rev 1.10/0.01, addr 2 no specific com port shows up, however, so i must need something else. David Coder Network Engineer Emeritus, Verio Washington, DC On Wed, 3 May 2006, Marc Fonvieille wrote: :Date: Wed, 3 May 2006 14:38:22 +0200 :From: Marc Fonvieille <blackend@freebsd.org> :To: David Coder <dacoder@dcoder.net> :Cc: freebsd-stable@freebsd.org :Subject: Re: usb to serial : :On Wed, May 03, 2006 at 08:33:22AM -0400, David Coder wrote: :> :> Is there a generic freebsd driver for usb-to-rs-232 adapters? My Thinkpad :> (running 6.1-RC) doesn't have a standard db-9 port. :> : :uftdi(4) for some USB/RS232 adapters. : :Marc :_______________________________________________ :freebsd-stable@freebsd.org mailing list :http://lists.freebsd.org/mailman/listinfo/freebsd-stable :To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" : On Wed, 3 May 2006, Vivek Khera wrote: :Date: Wed, 3 May 2006 10:00:42 -0400 :From: Vivek Khera <vivek@khera.org> :To: freebsd-stable <freebsd-stable@freebsd.org> :Subject: Re: usb to serial : : :On May 3, 2006, at 8:33 AM, David Coder wrote: : :> Is there a generic freebsd driver for usb-to-rs-232 adapters? My Thinkpad :> (running 6.1-RC) doesn't have a standard db-9 port. : :I bought a generic one from BestBuy which works with the uplcom driver (I just :load it from loader.conf). I have an older one I bought there a year ago that :also works with the driver, but only reliably up to 38400 baud. That could be :due to the system to which it is connected, though. The new one seems safe up :to 115200. : :They show up as device /dev/cuaU0 in FreeBSD 6+. They both probe as: : :ucom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2 : : On Wed, 3 May 2006, Helge Oldach wrote: :Date: Wed, 3 May 2006 16:02:57 +0200 (MET DST) :From: Helge Oldach <helge.oldach@atosorigin.com> :To: David Coder <dacoder@dcoder.net> :Cc: freebsd-stable@freebsd.org :Subject: Re: usb to serial : :Marc Fonvieille: :>On Wed, May 03, 2006 at 08:33:22AM -0400, David Coder wrote: :>> Is there a generic freebsd driver for usb-to-rs-232 adapters? My Thinkpad :>> (running 6.1-RC) doesn't have a standard db-9 port. :>uftdi(4) for some USB/RS232 adapters. : :uplcom(4) as well, for example : :ucom0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 4 : :Helge :_______________________________________________ :freebsd-stable@freebsd.org mailing list :http://lists.freebsd.org/mailman/listinfo/freebsd-stable :To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" :
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060505105403.V33194>