Date: Wed, 7 Aug 1996 08:22:42 -0500 (CDT) From: mikebo@tellabs.com To: gibbs@freefall.freebsd.org (Justin T. Gibbs) Cc: mikebo (Mike Borowiec), mrm@mole.mole.org, bugs@freebsd.org, hackers@freebsd.org Subject: Re: 2.1.5R PANIC on AHA2742AT Message-ID: <199608071322.IAA21544@sunc210.tellabs.com> In-Reply-To: <199608062259.PAA10154@freefall.freebsd.org> from "Justin T. Gibbs" at Aug 6, 96 03:59:26 pm
next in thread | previous in thread | raw e-mail | index | archive | help
Justin wrote (and Mike Murphy concurred): > > Disable the uha0 device from within userconfig (boot with the -c flag). > Okay... I disabled everything except the console (sc0), floppy (fd0) and ethernet (ed0) which I need to get running... I get all the way through the configuration screens, right up to the point where the ethernet board is to be initialized. The ethernet configuration screen reads: Fatal signal 11 caught! I'm dead... The last line of my debug screen reads: DEBUG: Init routine called for network device ed0. >From this point on, all I can do is toggle between the config screen and the DEBUG screen. In the boot (/kernel -c) I manually reconfigured my ethernet board to the following values: ed0 at 0x280-0x29f irq 9 maddr 0xdc000 msize 16384 on isa I don't like using irq 9, but my system is full of cards. Besides, it has worked just fine under 2.1.0-RELEASE. The device is found at boot all right, and even tells me the hardware address, yet the install blows up on the ifconfig. Now what? 8v( - Mike -- -------------------------------------------------------------------------- Michael Borowiec - mikebo@tellabs.com - Tellabs Operations Inc. Senior Member of Technical Staff 4951 Indiana Avenue, MS 63 708-512-8211 FAX: 708-512-7099 Lisle, IL 60532 USA --------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199608071322.IAA21544>