Date: Thu, 15 Dec 2011 23:35:31 +0100 From: Pav Lucistnik <pav@FreeBSD.org> To: python <python@FreeBSD.org> Subject: [Fwd: py27-scriptaculous-1.8.1.1_2 failed on amd64 8] Message-ID: <1323988531.69753.4.camel@hood.oook.cz>
index | next in thread | raw e-mail
[-- Attachment #1 --] -------- Přeposlaná zpráva -------- > Od: User Ports-amd64 <ports-amd64@freebsd.org> > Komu: cvs@oook.cz, itetcu@freebsd.org, florent.thoumie@gmail.com > Předmět: py27-scriptaculous-1.8.1.1_2 failed on amd64 8 > Datum: Thu, 15 Dec 2011 11:33:37 GMT > > You can also find this build log at > > http://pointyhat.FreeBSD.org/errorlogs/amd64-errorlogs/a.8.20111215095917/py27-scriptaculous-1.8.1.1_2.log > > building py27-scriptaculous-1.8.1.1_2 on gohan61.freebsd.org > in directory /y/pkgbuild/8/20111215095917/chroot/12 > building for: 8.1-RELEASE-p4 amd64 > maintained by: python@FreeBSD.org > port directory: /usr/ports/www/py-scriptaculous > Makefile ident: $FreeBSD: ports/www/py-scriptaculous/Makefile,v 1.5 2011/02/27 16:16:14 miwi Exp $ > build started at Thu Dec 15 11:32:18 UTC 2011 > FETCH_DEPENDS= > PATCH_DEPENDS= > EXTRACT_DEPENDS=unzip-6.0_1.tbz > BUILD_DEPENDS=gettext-0.18.1.1.tbz libiconv-1.13.1_1.tbz py27-AddOns-0.7.tbz py27-BytecodeAssembler-0.6.tbz py27-DecoratorTools-1.8_1.tbz py27-Extremes-1.1.1.tbz py27-Genshi-0.6.tbz py27-PEAK-Rules-0.5a1_3.tbz py27-Paste-1.7.5.1_1.tbz py27-PasteDeploy-1.3.4_1.tbz py27-PasteScript-1.7.4.2.tbz py27-SymbolType-1.0.tbz py27-TurboCheetah-1.0_1.tbz py27-TurboGears-1.5.1.tbz py27-TurboJson-1.3.2.tbz py27-TurboKid-1.0.5_1.tbz py27-cheetah-2.4.4.tbz py27-cherrypy-3.2.2.tbz py27-configobj-4.7.2.tbz py27-flup-1.0.2_1.tbz py27-formencode-1.2.2_1.tbz py27-kid-0.9.6_1.tbz py27-markdown-2.1.0.tbz py27-setuptools-0.6c11_1.tbz py27-simplejson-2.3.0.tbz py27-sqlobject-1.2.0.tbz py27-tgMochiKit-1.4.2.tbz py27-wsgiutils-0.7_1.tbz python27-2.7.2_3.tbz > RUN_DEPENDS=gettext-0.18.1.1.tbz libiconv-1.13.1_1.tbz py27-AddOns-0.7.tbz py27-BytecodeAssembler-0.6.tbz py27-DecoratorTools-1.8_1.tbz py27-Extremes-1.1.1.tbz py27-Genshi-0.6.tbz py27-PEAK-Rules-0.5a1_3.tbz py27-Paste-1.7.5.1_1.tbz py27-PasteDeploy-1.3.4_1.tbz py27-PasteScript-1.7.4.2.tbz py27-SymbolType-1.0.tbz py27-TurboCheetah-1.0_1.tbz py27-TurboGears-1.5.1.tbz py27-TurboJson-1.3.2.tbz py27-TurboKid-1.0.5_1.tbz py27-cheetah-2.4.4.tbz py27-cherrypy-3.2.2.tbz py27-configobj-4.7.2.tbz py27-flup-1.0.2_1.tbz py27-formencode-1.2.2_1.tbz py27-kid-0.9.6_1.tbz py27-markdown-2.1.0.tbz py27-setuptools-0.6c11_1.tbz py27-simplejson-2.3.0.tbz py27-sqlobject-1.2.0.tbz py27-tgMochiKit-1.4.2.tbz py27-wsgiutils-0.7_1.tbz python27-2.7.2_3.tbz > prefixes: LOCALBASE=usr/local > add_pkg > ================================================================ > ====================<phase 1: make checksum>==================== > ===> License check disabled, port has not defined LICENSE > => Scriptaculous-1.8.1.1.zip doesn't seem to exist in /tmp/distfiles/. > => Attempting to fetch ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/Scriptaculous-1.8.1.1.zip > Scriptaculous-1.8.1.1.zip 75 kB 1400 kBps > => SHA256 Checksum OK for Scriptaculous-1.8.1.1.zip. > ================================================================ > ====================<phase 2: make extract>==================== > add_pkg unzip-6.0_1.tbz > adding dependencies > pkg_add unzip-6.0_1.tbz > ===> License check disabled, port has not defined LICENSE > ===> Extracting for py27-scriptaculous-1.8.1.1_2 > => SHA256 Checksum OK for Scriptaculous-1.8.1.1.zip. > ===> py27-scriptaculous-1.8.1.1_2 depends on file: /usr/local/bin/unzip - found > Deleting unzip-6.0_1 > ================================================================ > ====================<phase 3: make patch>==================== > add_pkg > ===> Patching for py27-scriptaculous-1.8.1.1_2 > ================================================================ > ====================<phase 4: make build>==================== > add_pkg gettext-0.18.1.1.tbz libiconv-1.13.1_1.tbz py27-AddOns-0.7.tbz py27-BytecodeAssembler-0.6.tbz py27-DecoratorTools-1.8_1.tbz py27-Extremes-1.1.1.tbz py27-Genshi-0.6.tbz py27-PEAK-Rules-0.5a1_3.tbz py27-Paste-1.7.5.1_1.tbz py27-PasteDeploy-1.3.4_1.tbz py27-PasteScript-1.7.4.2.tbz py27-SymbolType-1.0.tbz py27-TurboCheetah-1.0_1.tbz py27-TurboGears-1.5.1.tbz py27-TurboJson-1.3.2.tbz py27-TurboKid-1.0.5_1.tbz py27-cheetah-2.4.4.tbz py27-cherrypy-3.2.2.tbz py27-configobj-4.7.2.tbz py27-flup-1.0.2_1.tbz py27-formencode-1.2.2_1.tbz py27-kid-0.9.6_1.tbz py27-markdown-2.1.0.tbz py27-setuptools-0.6c11_1.tbz py27-simplejson-2.3.0.tbz py27-sqlobject-1.2.0.tbz py27-tgMochiKit-1.4.2.tbz py27-wsgiutils-0.7_1.tbz python27-2.7.2_3.tbz > adding dependencies > pkg_add gettext-0.18.1.1.tbz > pkg_add libiconv-1.13.1_1.tbz > skipping libiconv-1.13.1_1, already added > pkg_add py27-AddOns-0.7.tbz > > ==== > Note that some of the standard modules are provided as separate > ports since they require extra dependencies: > > bsddb databases/py-bsddb > gdbm databases/py-gdbm > sqlite3 databases/py-sqlite3 > tkinter x11-toolkits/py-tkinter > > Install them as needed. > ==== > > pkg_add py27-BytecodeAssembler-0.6.tbz > pkg_add py27-DecoratorTools-1.8_1.tbz > skipping py27-DecoratorTools-1.8_1, already added > pkg_add py27-Extremes-1.1.1.tbz > pkg_add py27-Genshi-0.6.tbz > pkg_add py27-PEAK-Rules-0.5a1_3.tbz > pkg_add py27-Paste-1.7.5.1_1.tbz > pkg_add py27-PasteDeploy-1.3.4_1.tbz > pkg_add py27-PasteScript-1.7.4.2.tbz > pkg_add py27-SymbolType-1.0.tbz > skipping py27-SymbolType-1.0, already added > pkg_add py27-TurboCheetah-1.0_1.tbz > pkg_add py27-TurboGears-1.5.1.tbz > pkg_add py27-TurboJson-1.3.2.tbz > skipping py27-TurboJson-1.3.2, already added > pkg_add py27-TurboKid-1.0.5_1.tbz > skipping py27-TurboKid-1.0.5_1, already added > pkg_add py27-cheetah-2.4.4.tbz > skipping py27-cheetah-2.4.4, already added > pkg_add py27-cherrypy-3.2.2.tbz > skipping py27-cherrypy-3.2.2, already added > pkg_add py27-configobj-4.7.2.tbz > skipping py27-configobj-4.7.2, already added > pkg_add py27-flup-1.0.2_1.tbz > skipping py27-flup-1.0.2_1, already added > pkg_add py27-formencode-1.2.2_1.tbz > skipping py27-formencode-1.2.2_1, already added > pkg_add py27-kid-0.9.6_1.tbz > skipping py27-kid-0.9.6_1, already added > pkg_add py27-markdown-2.1.0.tbz > skipping py27-markdown-2.1.0, already added > pkg_add py27-setuptools-0.6c11_1.tbz > skipping py27-setuptools-0.6c11_1, already added > pkg_add py27-simplejson-2.3.0.tbz > skipping py27-simplejson-2.3.0, already added > pkg_add py27-sqlobject-1.2.0.tbz > skipping py27-sqlobject-1.2.0, already added > pkg_add py27-tgMochiKit-1.4.2.tbz > skipping py27-tgMochiKit-1.4.2, already added > pkg_add py27-wsgiutils-0.7_1.tbz > skipping py27-wsgiutils-0.7_1, already added > pkg_add python27-2.7.2_3.tbz > skipping python27-2.7.2_3, already added > ===> py27-scriptaculous-1.8.1.1_2 depends on package: py27-TurboGears>=1.1.2 - found > ===> py27-scriptaculous-1.8.1.1_2 depends on file: /usr/local/bin/easy_install-2.7 - found > ===> py27-scriptaculous-1.8.1.1_2 depends on file: /usr/local/bin/python2.7 - found > ===> Configuring for py27-scriptaculous-1.8.1.1_2 > Traceback (most recent call last): > File "setup.py", line 2, in <module> > from turbogears.finddata import find_package_data > File "/usr/local/lib/python2.7/site-packages/TurboGears-1.5.1-py2.7.egg/turbogears/__init__.py", line 19, in <module> > from turbogears.widgets import mochikit, jsi18nwidget > File "/usr/local/lib/python2.7/site-packages/TurboGears-1.5.1-py2.7.egg/turbogears/widgets/__init__.py", line 3, in <module> > from turbogears.widgets.base import * > File "/usr/local/lib/python2.7/site-packages/TurboGears-1.5.1-py2.7.egg/turbogears/widgets/base.py", line 19, in <module> > from turbogears import config, startup, view > File "/usr/local/lib/python2.7/site-packages/TurboGears-1.5.1-py2.7.egg/turbogears/startup.py", line 19, in <module> > pkg_resources.require("TurboGears") > File "build/bdist.freebsd-8.1-RELEASE-p4-amd64/egg/pkg_resources.py", line 666, in require > File "build/bdist.freebsd-8.1-RELEASE-p4-amd64/egg/pkg_resources.py", line 565, in resolve > pkg_resources.DistributionNotFound: TGScheduler>=1.6.2 > *** Error code 1 > > Stop in /a/ports/www/py-scriptaculous. > ================================================================ > build of /usr/ports/www/py-scriptaculous ended at Thu Dec 15 11:33:32 UTC 2011 -- -- Pav Lucistnik <pav@oook.cz> <pav@FreeBSD.org> As I understand it the M25 marks the border between culture and agriculture. [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (FreeBSD) iEYEABECAAYFAk7qdjMACgkQntdYP8FOsoI6IACgl4L0zvwrtwn8nse/lGcZp9qQ xLUAnjsk/fsADmPEEOyshJJA5EuJwrk/ =yDSJ -----END PGP SIGNATURE-----help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1323988531.69753.4.camel>