Date: Mon, 30 Jul 2001 11:02:32 +0400 From: Sergey Homenkow <hsw@vist.bryansk.ru> To: freebsd-stable@freebsd.org Subject: pnpbios: Bad PnP BIOS data checksum Message-ID: <1867158232.20010730110232@vist.bryansk.ru>
next in thread | raw e-mail | index | archive | help
What's mean "pnpbios: Bad PnP BIOS data checksum" ?
=== dmesg ===
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #13: Fri Jul 27 12:08:27 MSD 2001
root@ksih.vist.bryansk.ru:/usr/src/sys/compile/KSIH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (664.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132907008 (129792K bytes)
avail memory = 125767680 (122820K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc033a000.
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc02d1d42 (1000022)
VESA: Intel(R) 815 Chipset Video BIOS
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xfeb80000-0xfebfffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdd80-0xddbf mem 0xfe400000-0xfe4fffff,0xfe9fd000-0xfe9fdfff irq 11 at device
9.0 on pci1
fxp0: Ethernet address 00:02:b3:3d:44:3c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xde80-0xdebf mem 0xfe600000-0xfe6fffff,0xfe9fe000-0xfe9fefff irq 11 at device
10.0 on pci1
fxp1: Ethernet address 00:02:b3:3d:41:bb
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem 0xfe800000-0xfe8fffff,0xfe9ff000-0xfe9fffff irq 9 at device
11.0 on pci1
fxp2: Ethernet address 00:02:b3:3a:78:ee
inphy2: <i82555 10/100 media interface> on miibus2
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
pca0 at port 0x40 on isa0
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
ad0: 19546MB <FUJITSU MPG3204AT E> [39714/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
=== ===
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1867158232.20010730110232>