Date: Sat, 15 Jun 2002 22:29:11 -0700 (PDT) From: Denis DeLaRoca <delaroca@ucla.edu> To: <freebsd-stable@freebsd.org> Cc: <sos@freebsd.org> Subject: 4.6 CD-ROM Install Problems Message-ID: <20020615220719.R4232-100000@acacia.cts.ucla.edu>
next in thread | raw e-mail | index | archive | help
Hi!
I am unable to install 4.6-RELEASE from CD-ROM. I boot allright, go into
the installer, configure the installation and then after the new file
systems are created and the installer is attempting to extract the 'bin'
distribution into the '/' root directory reading from the CD-ROM stops...
The virtual tty 2 shows amongst its messages,
acd0: READ_BIG Command timeout -- resetting
ata1: resetting devices
also I seem to remember there was another message such as "-ILLEGAL
REQUEST asc=0x20 ascq=0x00 err=0x00" on acd0... sorry, I didn't write it
completely.
below is my dmesg log. My CD-RW unit is a generic ATAPI CD/RW 8x4x32 that
worked fine with FreeBSD 4,5 and previous releases.
I was able to do a network install and find that the CD-RW units appears
functional -- was able to burn a CD for example. So the problem seems to
be attempting to do a fresh install of FreeBSD 4.6.
The CD-ROM unit is configured on an ASUS motherboard with TYPE [CD-ROM],
PIO mode [4] and ULTRA DMA Mode [Disabled]. Works fine with Windows and
Linux of course. atacontrol list outputs,
ATA channel 0:
Master: ad0 <IBM-DTLA-307020/TX3OA60A> ATA/ATAPI rev 5
Slave: no device present
ATA channel 1:
Master: acd0 <8X4X32/5.EZ> ATA/ATAPI rev 0
Slave: no device present
Any parameters that could be changed at install time to be able to install
4.6 from CD-ROM on my system?
-- Denis
---------------------------------------------------------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (799.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory = 536788992 (524208K bytes)
avail memory = 517361664 (505236K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1260
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb800-0xb87f mem
0xf7800000-0xf780
007f irq 10 at device 7.0 on pci0
xl0: Ethernet address: 00:50:04:d7:e0:40
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x109e, dev=0x0350) at 9.0 irq 9
pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 10.0 irq 5
pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 10.1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19623MB <IBM-DTLA-307020> [39870/16/63] at ata0-master UDMA100
acd0: CD-RW <8X4X32> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020615220719.R4232-100000>