Date: Wed, 6 Nov 2002 00:42:05 -0600 From: =?iso-8859-1?Q?Braulio_Jos=E9_Solano_Rojas?= <braulio@bsolano.com> To: "John Baldwin" <jhb@FreeBSD.org> Cc: <freebsd-hardware@FreeBSD.ORG> Subject: Re: Intel PCI Modem Message-ID: <001a01c28560$ddf46050$193ba5d0@azul> References: <XFMail.20021104114028.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello!
On Monday, November 04, 2002 John Baldwin wrote:
>
> On 04-Nov-2002 Braulio José Solano Rojas wrote:
> > Hi!
> >
> > On Thursday, October 31, 2002 John Baldwin wrote:
> >>
> >> On 31-Oct-2002 Braulio José Solano Rojas wrote:
> >> > Hello!
> >> >
> >> > I have an "Intel V92 HaM Data Fax Voice" Modem. It is a hardware
based
> >> > modem. Mi pnpbios recognizes it as "Simple COMM. controler IRQ12".
> >> >
> >> > I would like to hack sio.c in order to get it working. Therefore I
> > think I
> >> > should add an entry to pci_ids[] like:
> >> > {hex x, "Intel V92 HaM Data Fax Voice", hex y}
> >> >
> >> > But I do not know what are hex x and hex y, or if it is going to
work.
> >>
> >> The 'x' is 0x40001813. To get the 'y', you need to do a boot -v
> >> and send the output here.
> > I have tried with these:
> > {0x40001813, "Creatix V.90 HaM Modem", 0x10}
> > {0x40001813, "Creatix V.90 HaM Modem", 0x14}
> >
> > If I do a boot -v I get this:
> > found -> vendor=0x1813, dev=0x4000, revid=0x02
> > class=07-80-00, ndrtype=0x00, mfdev=0
> > subordinatebus=0 secondarybus=0
> > intpin=a, irq=12
> > map[10]: type 1, range 32, base df000000, size 12
> > map[14]: type 1, range 32, base 000d8000, size 8
> >
> > I also have added to my kernel configuration file option
> > PCI_ENABLE_IO_MODES.
>
> You want to use the 0x14 version. Does it work?
No it does not work.
I have tried with:
device sio2 at isa? port IO_COM3 irq 12
on my kernel configuration file and with:
device sio2 at pci? port IO_COM3 irq 12
without success.
> > May be, I should add this modem to src/sys/dev/puc/pucdata.c.
>
> Unless it has multiple serial ports on it I would just stick it
> in sio_pci.c.
Where is this file? I can not find it.
Do I have to add something more than
{0x40001813, "Creatix V.90 HaM Modem", 0x14}in sio.c?
If yes, what and where?
Is the entry for sio2 in my kernel configuration file fine?
I appreciate your help.
Best regards,
Braulio Solano
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001a01c28560$ddf46050$193ba5d0>