Date: Fri, 24 Jan 2003 22:54:30 -0600 (CST) From: Kevin Day <toasty@dragondata.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/47451: 5.0 GENERIC(sysinstall CD) locks during boot on Proliant ML530 Message-ID: <200301250454.h0P4sUh15987@shell.dragondata.com>
next in thread | raw e-mail | index | archive | help
>Number: 47451
>Category: kern
>Synopsis: 5.0 GENERIC(sysinstall CD) locks during boot on Proliant ML530
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Jan 24 21:40:02 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Kevin Day
>Release: FreeBSD 5.0-RELEASE i386
>Organization:
Stileproject, Inc.
>Environment:
Booting with -v over serial console to get this log
Timecounter "TSC" frequency 863938967 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C>
real memory = 2147467264 (2047 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00ad2000 - 0x7fff3fff, 2136088576 bytes (521506 pages)
avail memory = 2079301632 (1982 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x84
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062679c
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ RACEBAIT> on motherboard
ACPI-0625: *** Info: GPE Block1 defined as GPE0 to GPE7
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 8, max = 23, width = 16
ACPI timer looks BAD min = 12, max = 19, width = 8
ACPI timer looks BAD min = 8, max = 23, width = 16
ACPI timer looks BAD min = 8, max = 23, width = 16
ACPI timer looks BAD min = 12, max = 19, width = 8
ACPI timer looks BAD min = 0, max = 31, width = 32
ACPI timer looks BAD min = 8, max = 23, width = 16
ACPI timer looks BAD min = 12, max = 19, width = 8
ACPI timer looks BAD min = 0, max = 31, width = 32
ACPI timer looks BAD min = 0, max = 31, width = 32
Timecounter "ACPI-safe" frequency 3579545 Hz
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\_SB_.INA0 irq 0: [ 15] 0.8.0
\_SB_.INA0 irq 0: [ 15] 0.8.1
\_SB_.INA0 irq 0: [ 15] 0.8.2
\_SB_.INA0 irq 0: [ 15] 0.8.3
\_SB_.INT7 irq 0: [ 15] 0.5.0
\_SB_.INT4 irq 0: [ 15] 0.15.0
---- before setting priority for links ------------
\_SB_.INA0:
interrupts: 15
penalty: 10660
references: 4
priority: 0
\_SB_.INT7:
interrupts: 15
penalty: 10660
references: 1
priority: 0
\_SB_.INT4:
interrupts: 15
penalty: 10660
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.INA0:
interrupts: 15
penalty: 10660
references: 4
priority: 42640
\_SB_.INT7:
interrupts: 15
penalty: 10660
references: 1
priority: 10660
\_SB_.INT4:
interrupts: 15
penalty: 10660
references: 1
priority: 10660
---- after fixup boot-disabled links --------------
\_SB_.INA0:
interrupts: 15
penalty: 10660
references: 4
priority: 42640
\_SB_.INT7:
interrupts: 15
penalty: 10660
references: 1
priority: 10660
\_SB_.INT4:
interrupts: 15
penalty: 10660
references: 1
priority: 10660
---- arbitrated configuration ---------------------
\_SB_.INA0 irq 0: [ 15] 0.8.0
\_SB_.INA0 irq 0: [ 15] 0.8.1
\_SB_.INA0 irq 0: [ 15] 0.8.2
\_SB_.INA0 irq 0: [ 15] 0.8.3
\_SB_.INT7 irq 0: [ 15] 0.5.0
\_SB_.INT4 irq 0: [ 15] 0.15.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base f7dfff00, size 8, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=0, slot=3, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 3, range 32, base f6000000, size 24, enabled
map[14]: type 4, range 32, base 00002000, size 8, enabled
map[18]: type 1, range 32, base f7dfe000, size 12, enabled
found-> vendor=0x1002, dev=0x4756, revid=0x7a
bus=0, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[90]: type 4, range 32, base 00000000, size 4, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x4f
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002400, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=17, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <base peripheral> at device 3.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0-0xf at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2400-0x240f at device 15.10
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2400
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=00 stat1=00
ata0-slave: ATA 04 a5
ata0: devices=06
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2408
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pcib1: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\_SB_.INA6 irq 0: [ 15] 2.5.0
\_SB_.INA6 irq 0: [ 15] 2.5.1
\_SB_.INA6 irq 0: [ 15] 2.5.2
\_SB_.INA6 irq 0: [ 15] 2.5.3
\_SB_.INA7 irq 0: [ 15] 2.6.0
\_SB_.INA7 irq 0: [ 15] 2.6.1
\_SB_.INA7 irq 0: [ 15] 2.6.2
\_SB_.INA7 irq 0: [ 15] 2.6.3
---- before setting priority for links ------------
\_SB_.INA0:
interrupts: 15
penalty: 11540
references: 4
priority: 42640
\_SB_.INT7:
interrupts: 15
penalty: 11540
references: 1
priority: 10660
\_SB_.INT4:
interrupts: 15
penalty: 11540
references: 1
priority: 10660
\_SB_.INA6:
interrupts: 15
penalty: 11540
references: 4
priority: 0
\_SB_.INA7:
interrupts: 15
penalty: 11540
references: 4
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.INA0:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INA6:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INA7:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INT7:
interrupts: 15
penalty: 11540
references: 1
priority: 11540
\_SB_.INT4:
interrupts: 15
penalty: 11540
references: 1
priority: 11540
---- after fixup boot-disabled links --------------
\_SB_.INA0:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INA6:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INA7:
interrupts: 15
penalty: 11540
references: 4
priority: 46160
\_SB_.INT7:
interrupts: 15
penalty: 11540
references: 1
priority: 11540
\_SB_.INT4:
interrupts: 15
penalty: 11540
references: 1
priority: 11540
---- arbitrated configuration ---------------------
\_SB_.INA6 irq 0: [ 15] 2.5.0
\_SB_.INA6 irq 0: [ 15] 2.5.1
\_SB_.INA6 irq 0: [ 15] 2.5.2
\_SB_.INA6 irq 0: [ 15] 2.5.3
\_SB_.INA7 irq 0: [ 15] 2.6.0
\_SB_.INA7 irq 0: [ 15] 2.6.1
\_SB_.INA7 irq 0: [ 15] 2.6.2
\_SB_.INA7 irq 0: [ 15] 2.6.3
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
pcib2: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\_SB_.INA1 irq 0: [ 15] 5.8.0
\_SB_.INA1 irq 0: [ 15] 5.8.1
\_SB_.INA1 irq 0: [ 15] 5.8.2
\_SB_.INA1 irq 0: [ 15] 5.8.3
\_SB_.INA2 irq 0: [ 15] 5.7.0
\_SB_.INA2 irq 0: [ 15] 5.7.1
\_SB_.INA2 irq 0: [ 15] 5.7.2
\_SB_.INA2 irq 0: [ 15] 5.7.3
\_SB_.INA3 irq 0: [ 15] 5.6.0
\_SB_.INA3 irq 0: [ 15] 5.6.1
\_SB_.INA3 irq 0: [ 15] 5.6.2
\_SB_.INA3 irq 0: [ 15] 5.6.3
\_SB_.INA4 irq 5: [ 15] 5.9.0
\_SB_.INA4 irq 5: [ 15] 5.9.1
\_SB_.INA4 irq 5: [ 15] 5.9.2
\_SB_.INA4 irq 5: [ 15] 5.9.3
\_SB_.INA5 irq 0: [ 15] 5.5.0
\_SB_.INA5 irq 0: [ 15] 5.5.1
\_SB_.INA5 irq 0: [ 15] 5.5.2
\_SB_.INA5 irq 0: [ 15] 5.5.3
\_SB_.INT6 irq 10: [ 15] 5.4.0
\_SB_.INT5 irq 11: [ 15] 5.4.1
---- before setting priority for links ------------
\_SB_.INA0:
interrupts: 15
penalty: 13300
references: 4
priority: 46160
\_SB_.INA6:
interrupts: 15
penalty: 13300
references: 4
priority: 46160
\_SB_.INA7:
interrupts: 15
penalty: 13300
references: 4
priority: 46160
\_SB_.INT7:
interrupts: 15
penalty: 13300
references: 1
priority: 11540
\_SB_.INT4:
interrupts: 15
penalty: 13300
references: 1
priority: 11540
\_SB_.INA1:
interrupts: 15
penalty: 13300
references: 4
priority: 0
\_SB_.INA2:
interrupts: 15
penalty: 13300
references: 4
priority: 0
\_SB_.INA3:
interrupts: 15
penalty: 13300
references: 4
priority: 0
\_SB_.INA5:
interrupts: 15
penalty: 13300
references: 4
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.INA0:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA6:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA7:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA1:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA2:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA3:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA5:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INT7:
interrupts: 15
penalty: 13300
references: 1
priority: 13300
\_SB_.INT4:
interrupts: 15
penalty: 13300
references: 1
priority: 13300
---- after fixup boot-disabled links --------------
\_SB_.INA0:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA6:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA7:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA1:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA2:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA3:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INA5:
interrupts: 15
penalty: 13300
references: 4
priority: 53200
\_SB_.INT7:
interrupts: 15
penalty: 13300
references: 1
priority: 13300
\_SB_.INT4:
interrupts: 15
penalty: 13300
references: 1
priority: 13300
---- arbitrated configuration ---------------------
\_SB_.INA1 irq 0: [ 15] 5.8.0
\_SB_.INA1 irq 0: [ 15] 5.8.1
\_SB_.INA1 irq 0: [ 15] 5.8.2
\_SB_.INA1 irq 0: [ 15] 5.8.3
\_SB_.INA2 irq 0: [ 15] 5.7.0
\_SB_.INA2 irq 0: [ 15] 5.7.1
\_SB_.INA2 irq 0: [ 15] 5.7.2
\_SB_.INA2 irq 0: [ 15] 5.7.3
\_SB_.INA3 irq 0: [ 15] 5.6.0
\_SB_.INA3 irq 0: [ 15] 5.6.1
\_SB_.INA3 irq 0: [ 15] 5.6.2
\_SB_.INA3 irq 0: [ 15] 5.6.3
\_SB_.INA4 irq 5: [ 15] 5.9.0
\_SB_.INA4 irq 5: [ 15] 5.9.1
\_SB_.INA4 irq 5: [ 15] 5.9.2
\_SB_.INA4 irq 5: [ 15] 5.9.3
\_SB_.INA5 irq 0: [ 15] 5.5.0
\_SB_.INA5 irq 0: [ 15] 5.5.1
\_SB_.INA5 irq 0: [ 15] 5.5.2
\_SB_.INA5 irq 0: [ 15] 5.5.3
\_SB_.INT6 irq 10: [ 15] 5.4.0
\_SB_.INT5 irq 11: [ 15] 5.4.1
pci5: <ACPI PCI bus> on pcib2
pci5: physical bus=5
map[10]: type 4, range 32, base 00003000, size 8, enabled
map[14]: type 1, range 64, base f7fffc00, size 10, enabled
map[1c]: type 1, range 64, base f7ffc000, size 13, enabled
found-> vendor=0x1000, dev=0x000b, revid=0x05
bus=5, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003400, size 8, enabled
map[14]: type 1, range 64, base f7ffbc00, size 10, enabled
map[1c]: type 1, range 64, base f7ff8000, size 13, enabled
found-> vendor=0x1000, dev=0x000b, revid=0x05
bus=5, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f7ff7000, size 12, enabled
map[14]: type 4, range 32, base 00003800, size 6, enabled
map[18]: type 1, range 32, base f7e00000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=5, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
sym0: <896> port 0x3000-0x30ff mem 0xf7ffc000-0xf7ffdfff,0xf7fffc00-0xf7ffffff 5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <896> port 0x3400-0x34ff mem 0xf7ff8000-0xf7ff9fff,0xf7ffbc00-0xf7ffbfff 5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3800-0x383f mem 0xf7e00000-0xf7e5
fxp0: using memory space register mapping
fxp0: Ethernet address 00:50:8b:af:a0:7a
fxp0: PCI IDs: 8086 1229 0e11 b144 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xc97ff,0x0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
At this point it hard locks... Even the keyboard is dead.
>Description:
>How-To-Repeat:
We have two(of two) ML530's that are exhibiting this behavior. I can
reproduce this as needed, but this are production systems, so my window for
intrusive testing is pretty narrow.
For reference, here's one of them (only difference with this one is it's got
a em0 and rp0 card) booting 4.7:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #2: Fri Sep 27 19:05:47 GMT 2002
toasty@server10.stileproject.com:/usr/src/sys/compile/SERVER
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147467264 (2097136K bytes)
avail memory = 2087018496 (2038104K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0428000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 31 -> irq 2
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 3.0
pci0: <ATI Mach64-GV graphics accelerator> at 5.0
rp0: <rp> port 0x2400-0x24ff mem 0xf7cfc000-0xf7cfcfff,0xf7cfd000-0xf7cfdfff irq 2 at device 8.0 on pci0
RocketPort0 = 32 ports
rp0: driver is using old-style compatibility shims
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2800-0x280f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 24 -> irq 5
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port 0x3000-0x301f mem 0xf7dc0000-0xf7ddffff,0xf7de0000-0xf7dfffff irq 5 at device 6.0 on pci2
em0: Speed:N/A Duplex:N/A
pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci255: <PCI bus> on pcib255
pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 22 -> irq 10
IOAPIC #0 intpin 21 -> irq 11
IOAPIC #0 intpin 27 -> irq 15
pci5: <PCI bus> on pcib5
sym0: <896> port 0x4000-0x40ff mem 0xf7ffc000-0xf7ffdfff,0xf7fffc00-0xf7ffffff irq 10 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0x4400-0x44ff mem 0xf7ff8000-0xf7ff9fff,0xf7ffbc00-0xf7ffbfff irq 11 at device 4.1 on pci5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x4800-0x483f mem 0xf7e00000-0xf7efffff,0xf7ff7000-0xf7ff7fff irq 15 at device 9.0 on pci5
fxp0: Ethernet address 00:50:8b:af:b5:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
ata0-slave: ATA identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <Compaq CRD-8402B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
da2 at sym0 bus 0 target 2 lun 0
da2: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da4 at sym0 bus 0 target 4 lun 0
da4: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BD01864552 3B08> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da3 at sym0 bus 0 target 3 lun 0
da3: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da3: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da5 at sym0 bus 0 target 5 lun 0
da5: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da5: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da5: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200301250454.h0P4sUh15987>