Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Jun 2001 12:59:56 +1000
From:      "Ivar E. Hosteng" <ivar@ih36.com>
To:        <freebsd-bugs@freebsd.org>
Subject:   Bug with FreeBSD 4.3-STABLE and Asus A7A266 motherboard with Xfree86 4.X
Message-ID:  <CGECLFHOGMBIJLFFLDHAKEAHCAAA.ivar@ih36.com>

next in thread | raw e-mail | index | archive | help
I am running FreeBSD 4.3-STABLE and I get the following panic when I
try to run xf86cfg. I have tried 2 different graphics cards (ATI Rage
and NVIDIA Geoforce 2GTS) and the both crash at the same place.

I have the crashdump if anyone is intrested:

Here is the output captured on a serial console:
..
..
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(++) Using config file: "/rkernel trap 9 with interrupts disabled
ew"/XF86Config.n
Markers: (-
from config fileobed, (**)
                , (==) default sFetting,
       a  (++) from commtand line, (!!) naotice, (II) infolrmational,
          (WW) warnintg, (EE) error, (r??) unknown.
(=a=) ServerLayout p"XFree86 Configu red"
(**) |-->S9creen "Screen0" :(0)
(**) |   |- ->Monitor "Monitgor0"
(**) |   |e-->Device "Card0n"
(**) |-->Inpuet Device "Mouse0r"
(**) |-->Inpuat Device "Keyboalrd0"
(**) FontP ath set to
"/usrp/X11R6/lib/X11/fronts/misc/,/usr/oX11R6/lib/X11/fotnts/Speedo/,/usre/X
11R6/lib/X11/fconts/Type1/,/usrt/X11R6/lib/X11/fionts/CID/,/usr/Xo11R6/lib/X
11/fonnts/75dpi/,/usr/X
11R6/lib/X11/fonfts/100dpi/"
(**a) RgbPath set tou "/usr/X11R6/libl/X11/rgb"
(**) tModulePath set t o "/usr/X11R6/liwb/modules"
(--)h Chipset GeForcei2 GTS found
(IIl) Loading /usr/Xe11R6/lib/modules /libvbe.a
(II) iModule vbe: vendnor="The XFree86  Project"
      k  compiled for 4e.0.3, module verrsion = 1.0.0
(InI) Loading /usr/eX11R6/lib/modulels/libint10.a
(I I) Module int10:m vendor="The XFroee86 Project"
e version = 1.0.d efor 4.0.3, modul
                0
(II) NV(0): iinitializing int1n0
(==) NV(0): Wsrite-combining rtange (0xa0000,0xr20000) was alreaudy
clear
ction pointer   = 0x8:0xc0279943
stack pointer           = 0x10:0xd1565cf0
frame pointer           = 0x10:0xd1565d10
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 3
current process         = 435 (XFree86)
interrupt mask          = none
trap number             = 9
panic: general protection fault

syncing disks... 14 11 7 5 1
done
Uptime: 44s

dumping to dev #ad/0x20004, offset 262304
dump ata0: resetting devices .. done
383 382 381 380 379 378 377 376 375 374 373 372 371 370 369 368 367
366 365 364 363 362 361 360 359 358 357 356 355 354 353 352 351 350
349 348 347 346 345 344 343 342 341 340 339 338 337 336 335 334 333
332 331 330 329 328 327 326 325 324 323 322 321 320 319 318 317 316
315 314 313 312 311 310 309 308 307 306 305 304 303 302 301 300 299
298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282
281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265
264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248
247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231
230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214
213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197
196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180
179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163
162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146
145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129
128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112
111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93
92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70
69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47
46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
succeeded
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...


I hope anyone can make heads and tales of this

Regards,
Ivar E. Hosteng


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CGECLFHOGMBIJLFFLDHAKEAHCAAA.ivar>