Date: Tue, 16 Sep 2014 07:39:02 +0200 From: Hans Petter Selasky <hps@selasky.org> To: CeDeROM <cederom@tlen.pl>, FreeBSD Questions Mailing List <freebsd-questions@freebsd.org>, "freebsd-hackers@freebsd.org" <freebsd-hackers@freebsd.org>, freebsd-net@freebsd.org, "freebsd-usb@FreeBSD.org" <freebsd-usb@freebsd.org> Subject: Re: U3G QDL firmware loader for GOBI2000/HP_UN2420 MiniPCI/USB 3G/GPS Message-ID: <5417CCF6.10204@selasky.org> In-Reply-To: <CAFYkXjmtqHahC6bKU0UN-d6PKJpFtWGAQv6qYRWVCLc_zqoC-A@mail.gmail.com> References: <CAFYkXjmtqHahC6bKU0UN-d6PKJpFtWGAQv6qYRWVCLc_zqoC-A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 09/15/14 17:16, CeDeROM wrote: > Hello world! :-) > > I have changed my machine, there is a built-in GOBI2000 / HP UN2420 > 3G/GPS module installable as MiniPCI card and visible as USB device. I > have added its VID/PID to the usbdevs and u3g.c module, so after > recompilation it gets recognised by u3g module and apropriate > /dev/cuaU* device shows up.. > > The problem is that device does not store firmware inside non-volatile > memory, so user needs to upload it after power-on. I have the firmware > files. I can test modem with success after reboot from Win7 which > uploads firmware into device. Still, I need to upload the firmware > somehow on my FreeBSD. > > The upload protocol is QDL and /dev/cuaU0 shows up waiting for > command. Which utility can I use to upload firmware with QDL? I have > seen one post [1] regarding this problem in the past but the QDL > utility was not named explicitly. > > Any hints welcome! :-) > > Tomek > > [1] http://lists.freebsd.org/pipermail/freebsd-usb/2010-October/009384.html > Hi, Maybe you can use some tools to sniff the USB protocol under the other operating system. The protocol is probably not too complicated, and just replay the traffic. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5417CCF6.10204>