Date: Thu, 10 Aug 2000 10:54:59 -0700 (PDT) From: G Muthukumar <muthu@sequent.com> To: sheldonh@FreeBSD.org Cc: muthu@sequent.com, freebsd-bugs@FreeBSD.org, obrien@FreeBSD.org Subject: Re: i386/20513: Installation (over internet) does not work with DHCP; stops at "Scanning for DHCP servers" Message-ID: <200008101755.KAA11975@eng4.sequent.com> In-Reply-To: <200008101019.DAA86964@freefall.freebsd.org> from "sheldonh@FreeBSD.org" at Aug 10, 2000 04:19:51 AM
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
The network was indeed probed without any problems. I found
something strange yesterday. After I changed /etc/rc.conf to use DHCP &
rebooted it the first time, the system came up fine. When I rebooted it
yesterday evening (after I filed the PR), the system did not come up
(after displaying something related to 'hostname' while booting). I left
it and today morning, I found that the system is up.
Regards,
Muthu
dmesg output:
------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Thu Jul 27 04:44:16 GMT 2000
root@usw4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 126398464 (123436K bytes)
Preloaded elf kernel "kernel" at 0xc040d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 9
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2000-0x207f mem 0x41100000-0x4110007f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:04:87:44:3f
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x20a0-0x20af at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 20.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0xfc00-0xfc0f at device 20.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 6149MB <FUJITSU MPD3064AT> [13328/15/63] at ata0-master using UDMA33
acd0: CDROM <LTN323> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
>
> Synopsis: Installation (over internet) does not work with DHCP; stops at "Scanning for DHCP servers"
>
> State-Changed-From-To: open->feedback
> State-Changed-By: sheldonh
> State-Changed-When: Thu Aug 10 03:18:37 PDT 2000
> State-Changed-Why:
> I'm pretty sure that you need to give us more info here.
> Could you send dmesg(8) output for the affected system so that
> the maintainer can see what network card you were using and
> can confirm that the network card was actually probed properly?
>
>
> Responsible-Changed-From-To: freebsd-bugs->obrien
> Responsible-Changed-By: sheldonh
> Responsible-Changed-When: Thu Aug 10 03:18:37 PDT 2000
> Responsible-Changed-Why:
> Over to the maintainer.
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=20513
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200008101755.KAA11975>