Date: Fri, 15 Sep 2000 20:07:07 -0400 From: Joseph Jacobson <jacobson@pobox.com> To: freebsd-stable@freebsd.org Subject: silo overflow Message-ID: <200009160007.e8G078n02639@home.my.domain>
next in thread | raw e-mail | index | archive | help
Just got this error, doing a 'make fetch' over ppp, while running mpg123.
Kernel config can be provided if needed.
sio0: 1 more silo overflow (total 1)
sio0: 1 more silo overflow (total 2)
sio0: 1 more silo overflow (total 3)
sio0: 1 more silo overflow (total 4)
sio0: 1 more silo overflow (total 5)
sio0: 1 more silo overflow (total 6)
syslog:
=======
Sep 15 19:46:27 <kern.err> home /kernel: sio0: 1 more silo overflow (total 6)
Sep 15 19:46:51 <daemon.info> home ppp[2276]: tun0: Phase: deflink: HDLC errors -> FCS: 3, ADDR: 0, COMD: 0, PROTO: 0
dmesg:
======
FreeBSD 4.1-STABLE #0: Thu Sep 7 00:05:14 EDT 2000
joe@home:/usr/obj/usr/src/sys/new
Timecounter "i8254" frequency 1193090 Hz
CPU: AMD Athlon(tm) Processor (649.97-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x621 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 127377408 (124392K bytes)
Preloaded elf kernel "kernel" at 0xc0342000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02e4742 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8391)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> at 7.1
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x10b7, dev=0x9050) at 11.0 irq 10
pcm0: <AudioPCI ES1370> port 0xe000-0xe03f irq 9 at device 15.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xd9000000-0xd9000fff irq 11 at device 17.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
pca0 at port 0x40 on isa0
joy0 at port 0x201 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: <PNP0000> can't assign resources
unknown0: <PNP0200> at port 0-0xf,0x81-0x83,0x87,0x89-0x8b,0x8f-0x91,0xc0-0xdf drq 4 on isa0
unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
pca1: <AT-style speaker sound> at port 0x61 on isa0
unknown3: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown4: <PNP0c01> at iomem 0-0x9ffff,0xfffe0000-0xffffffff,0x100000-0x7ffffff on isa0
unknown5: <PNP0c02> at iomem 0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfffff,0xd4800-0xd7fff on isa0
unknown6: <PNP0a03> at port 0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x4000-0x407f,0x4080-0x40ff,0x5000-0x501f,0x6000-0x607f on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da1a
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST32155W 0596> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST32155W 0362> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-12TS 1.02> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [335018 x 2048 byte records]
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009160007.e8G078n02639>