Date: Fri, 06 Jun 1997 13:36:39 -0600 From: Joshua Fielden <shag@concentric.net> To: freebsd-questions@FreeBSD.ORG Subject: Re: PPP problems/still the same Message-ID: <339866C7.CA2685B8@concentric.net> References: <XFMail.970606084359.patrick@cre8tivegroup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Patrick Gardella wrote: > > Joshua, > > I use concentric.net as my ISP as well, so maybe my ppp.conf will help you. > Here it is: > > concentric: > set phone 2522113 > set openmode active > deny chap > accept pap > set authname g304090 > set authkey **** > set ifaddr 10.10.11.11/0 206.173.96.3/0 255.255.255.0 > add 0 0 10.10.11.11 > set timeout 0 > > You will also need to add a default route after you type "ppp -auto whatever" > For my ppp.conf, it would be : > > route add default 206.173.96.3 > > Although that IP could be changed to whatever you want, since the "/0" at the > end says "I don't care if you use any of the bits I have suggested." Just make > sure the second IP of the "ifaddr" and the "route add" line match. > > Let me know if this works. > > Patrick > > On 06-Jun-97 Joshua Fielden wrote: > >Well, I almost got my PPP to work... :-/ I can get -auto to work fine, > >dial, and even connect.... but then nothing happens. My ppp.log shows > >the last two line of any connection as > > > > > >LCP: state change Initial --> closed > >LCP: state change Closed --> stopped > > > > > > If I set openmode active, I get a chunk of what boils down to requests > >being sent from my machine, then it finally gives up. I have searched > >the archives for this problem, and see it has shown up before, but there > >never seems to be a resolution to any of the threads in the archives. > >They all seem to end up saying "talk to your ISP" but my ISP will not > >deal with anyone running any sort of U*ix system. Anyone got any ideas? > >I can use PPP fine in 95/NT/Dos, BTW, and under BSD, I can cu to my > >shell and telnet/PPP from there, so the hardware is fine and works. BTW, > >I am running 2.1.5-Release. okay, here's what my ppp.log says when openmode active is set, regardless of the other actions involved: LCP: Send Config Req AFCOMP PROTOCOMP ACCMAP [6] 00000000 MRU [4] 1500 MAGICNUM [6] d6b0575c AUTHPROTO [4] 49187 <repeat until end> LCP: state change Req-Sent --> Stopped LCP: LayerFinish Disconnected: Connect time: 16 secs Phase: Dead LCP: LayerStart Phase: Establish LCP: state change Stopped --> Starting Phase: Dead Pap, CHAP, Pred, all produce the same results either active or passive. Anyone have any help for deciphering these runes? :-) Thank You, JF
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?339866C7.CA2685B8>